Showing all 6 results
-
Al-Mg Aluminium Metal Powder
Al-Mg is alloy with good heat treatment response for structural parts. High level of mechanical propAl-Mg Aluminium Metal Powder
Al-Mg is alloy with good heat treatment response for structural parts. High level of mechanical properties is achieved along with the absence of expensive components in chemical composition. The parts or samples do not require solution treatment followed by quenching. Corrosion resistance of the alloy is similar to traditional 5XXX alloys. The alloy is a good substitute of aluminium wrought analogues for various applications.
-
Al-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. ThAl-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. The alloy can be used both after annealing or standard T6 temper. T6 temper ensures the better strength
performance. The alloy can be used as structural material for various applications (automotive, aerospace, etc.) under the heating up to 250°С. -
Al-Mg-Sc Aluminium Metal Powder
Al-Mg-Sc is a corrosion resistant Al-Mg-Sc alloy with improved performance in heat treated state. ThAl-Mg-Sc Aluminium Metal Powder
Al-Mg-Sc is a corrosion resistant Al-Mg-Sc alloy with improved performance in heat treated state. The parts or samples do not require solution treatment followed by quenching. High properties are achieved
after conventional annealing. Sc concentration was adjusted so as to provide an optimal high tensile characteristics to price ratio. Parts can be machined, welded, polished, coated or treated otherwise like
conventional Al-Mg products. -
Al-Si-Cu Aluminium Metal Powder
Al-Si-Cu is a novel Al-Si-Cu alloy with high processability via PBF. The alloy can be used both afteAl-Si-Cu Aluminium Metal Powder
Al-Si-Cu is a novel Al-Si-Cu alloy with high processability via PBF. The alloy can be used both after annealing or T6 temper. Heat treatment improves the elongation and decreases internal stresses. T6 temper ensures better fatigue performance, with slightly lower strength. Building rates are equal or better than ones for AlSi10Mg alloy. RS-320 alloy can be used as the substitution of casting and some wrought aluminium alloys with medium strength.
-
AlSi7Mg Aluminium Metal Powder
AlSi7Mg – is the common aluminium Al-Si alloy with good casting properties showing high performancAlSi7Mg Aluminium Metal Powder
AlSi7Mg – is the common aluminium Al-Si alloy with good casting properties showing high performance during powder bed fusion.
The alloy offers good strength and better ductility than for AlSi10Mg alloy. Printed samples and parts can be annealed or water quenched for various applications.
The properties are equal or superior to traditional casting A356 type alloys.
As-sintered parts can be treated in a similar manner as for casted parts -
AlSi10Mg Aluminium Metal Powder
AlSi10Mg – is the traditional aluminium alloy with good casting properties and performance duringAlSi10Mg Aluminium Metal Powder
AlSi10Mg – is the traditional aluminium alloy with good casting properties and performance during powder bed fusion. Alloy offers good strength and ductility after annealing. Properties are equal or superior to traditional casting Al-Si alloys. Printed parts can be treated in a similar manner as for casted parts.
