AlSi10Mg Aluminium Metal Powder
AlSi10Mg – is the traditional aluminium alloy with good casting properties and performance during powder bed fusion. Alloy offers good strength and ductility after annealing. Properties are equal or superior to traditional casting Al-Si alloys. Printed parts can be treated in a similar manner as for casted parts.
Details
| Brand | |
|---|---|
| Country of origin | Russia |
Description
| Chemical composition, wt. | |||
| Aluminium (Al) | Balance | ||
| Silicon (Si) | 9,0 – 11,0% | ||
| Magnesium (Mg) | 0,2 – 0,45% | ||
| Iron (Fe) | ≤ 0,35% | ||
| Titanium (Ti) | ≤ 0,15% | ||
| Copper (Cu) | ≤ 0,05% | ||
| Manganese (Mn) | ≤ 0,45% | ||
| Physical properties | |||
| Density | 2,658 g/cm3 | ||
| Porosity | ≤ 0,20 vol. % | ||
| Average mechanical properties | |||
| As-built | Annealed | ||
Elastic modulus Е | XY | 68 GPа | 68 GPа |
| Z | |||
UTS (σВ) | XY | 450 MPa | 370 MPa |
| Z | 470 MPa | 400 MPa | |
TYS (σ0,2), | XY | 260 MPа | 235 MPа |
| Z | 230 MPа | 220 MPа | |
Elongation δ5 | XY | 6,50% | 9,50% |
| Z | 5,50% | 7% | |
High-cycle fatigue limit (N = 2·107) | XY | 130 MPa | 110 MPa |
| Z | 110 MPa | 100 MPa | |
downloads
Related products
-
Al-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. ThAl-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. The alloy can be used both after annealing or standard T6 temper. T6 temper ensures the better strength
performance. The alloy can be used as structural material for various applications (automotive, aerospace, etc.) under the heating up to 250°С. -
Hydroxyapatite 3D Printing Paste
OXIDE CERAMICS Hydroxyapatite/TCP: material used in the biomedical applications for the manufactureHydroxyapatite 3D Printing Paste
OXIDE CERAMICS
Hydroxyapatite/TCP: material used in the biomedical applications for the manufacture of the osseous substitutes, chemical composition close to bone. -
Nexa3D xCast resin 5kg
$1,677xCast is tailored specifically for the production of precision investment casting patterns on the NXNexa3D xCast resin 5kg
xCast is tailored specifically for the production of precision investment casting patterns on the NXE400 3D printer.
$1,677 Add to cart -
Cordierite 3D Printing Paste
OXIDE CERAMICS This low CTE and thermal conductivity ceramic is wear resistant. It suits vacuum appCordierite 3D Printing Paste
OXIDE CERAMICS
This low CTE and thermal conductivity ceramic is wear resistant. It suits vacuum application.
