In stock
Nexa3D Tool Kit for XiP – Maintenance Set
Replacement tool kit for the Nexa3D XiP — the hand tools Nexa3D supplies for everyday operation and maintenance, from part removal to routine upkeep. A handy set to replace lost tools or equip a second workstation.
- ✓ Genuine Nexa3D XiP hand-tool set
- ✓ For part removal and routine XiP maintenance
- ✓ Ships in 2 business days from US stock
$132
Looking for Nexa3D resins? They are discontinued. See current replacements →
A resin printer is only as smooth to run as the tools beside it. This genuine Nexa3D tool kit is the set supplied for the XiP — the everyday hand tools for part removal and routine maintenance — ideal for replacing lost tools or equipping a second workstation.
Compatibility & Specifications
- Type: operator / maintenance hand-tool set
- Function: part removal and routine upkeep of the printer
- Compatible printer: Nexa3D XiP desktop resin printer (XiP Pro has its own kit)
- Part: genuine Nexa3D XiP tool kit (XIP_TOOL1)
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Keeping the correct tools at each printer stops operators improvising with substitutes that scratch plates and screens. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D Tool Kit for XiP – Maintenance Set
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D replacement resin vat container for the XiP desktop resin 3D printer — the rigid outer tray that holds the Everlast membrane and resin during printing. In stock at our US facility, ships in 2 business days.
- ✓ Outer vat container / tray for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part — pairs with the XiP Everlast membrane
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Add UV curing to your Sygnis F-NIS 23151: the UV Module with 365 nm and 405 nm diodes turns a Version A into a Version B, fitted by you.
- 365 nm and 405 nm UV, switched by the F-NIS post-processor
- Upgrades F-NIS Version A to Version B — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Dual-head frame reinforcement for the 3DCeram M.A.T. — mount two FFF or two DPE heads for bi-material printing.
- ✓ Two heads mounted simultaneously
- ✓ Bi-material printing in a single build
- ✓ Specified & fitted by Additive Plus
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
Made to order
· Made to order — typically ships in 1–2 weeks
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer is this tool kit for?
Is this a genuine Nexa3D part?
Why order a spare tool kit?
Place your order, or talk to an engineer first
Order Nexa3D Tool Kit for XiP – Maintenance Set direct, or talk to materials engineer