In stock
Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container
Replacement wash bucket for the Nexa3D XiP Wash+Cure station — the container that holds the cleaning solvent your printed parts are rinsed in. Swap a cracked or heavily fouled bucket to keep the wash cycle clean and contained.
- ✓ Solvent wash container for the XiP Wash+Cure
- ✓ Direct fit for the Nexa3D XiP Wash+Cure station
- ✓ Genuine Nexa3D part · ships in 2 business days
$87
Looking for Nexa3D resins? They are discontinued. See current replacements →
The wash bucket is where cured-resin parts get their solvent rinse in the Nexa3D Wash+Cure. Over time buckets crack or foul with cured resin, and a compromised container makes for a messy, less effective wash. This genuine replacement drops straight back into the station.
Compatibility & Specifications
- Type: solvent wash container / bucket
- Function: holds the cleaning solvent during the wash cycle
- Compatible station: Nexa3D XiP Wash+Cure
- Part: genuine Nexa3D Wash+Cure bucket (XIP_WC1_BUCKET)
- Replace when: cracked, leaking or heavily fouled with cured resin
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. A second bucket also lets you run different solvents without cross-contamination. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
Other products teams run alongside Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container
Replacement alumina tube for the Zetasinter 4L debinding and sintering furnace.
- ✔ Direct replacement part for the Zetasinter 4L
- ✔ Genuine Zetamix by Nanoe component
- ✔ Shipped from California, invoiced in USD
In stock
· Ships from California · 10–20 business days
Replacement 9.3-inch 4K monochrome LCD for the Nexa3D XiP — the masking screen that projects each layer through the light engine. A worn or failing LCD shows up as dim areas, stuck pixels or incomplete cures; this drop-in module restores full-resolution printing.
- ✓ 9.3″ 4K monochrome masking LCD
- ✓ Direct replacement for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Replacement LED module for the Nexa3D XiP Pro — the UV light source that cures resin through the masking LCD. As LEDs age, output drops and cures become uneven or slow; a fresh module restores consistent, full-area curing.
- ✓ UV LED light-engine module for the XiP Pro
- ✓ Direct replacement for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Two-fluid DIW / robocasting head for the 3DCeram M.A.T. — mix two materials, print ceramic slurry or silicone.
- ✓ Mixing 1:1–5:1 · 2×55 mL · up to 6 bar
- ✓ Two-fluid or single-fluid · fine, complex geometries
- ✓ Customer-developed feedstock · installs on your M.A.T.
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Replacement bubbler for the Zetasinter debinding and sintering furnace.
- ✔ Genuine Zetamix by Nanoe component
- ✔ Consumable part — keep a spare to avoid furnace downtime
- ✔ Shipped from California, invoiced in USD
In stock
· Ships from California · 10–20 business days
Add UV curing to your Sygnis F-NIS 23151: the UV Module with 365 nm and 405 nm diodes turns a Version A into a Version B, fitted by you.
- 365 nm and 405 nm UV, switched by the F-NIS post-processor
- Upgrades F-NIS Version A to Version B — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Replacement tool kit for the Nexa3D XiP — the hand tools Nexa3D supplies for everyday operation and maintenance, from part removal to routine upkeep. A handy set to replace lost tools or equip a second workstation.
- ✓ Genuine Nexa3D XiP hand-tool set
- ✓ For part removal and routine XiP maintenance
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which station is this wash bucket for?
Is this a genuine Nexa3D part?
When should the bucket be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container direct, or talk to materials engineer