Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
Hardware Maintenance
Nexa3D xWASH Power Supply – Internal PSU for xWASH Parts Washer | P/N 92011-01
Genuine Nexa3D internal power supply (P/N 92011-01 Rev A) for the xWASH automated parts washer — powers the touchscreen, controller and drive electronics.
- ✓ OEM Nexa3D P/N 92011-01 Rev A — xWASH parts washer
- ✓ Internal DC PSU · direct replacement
- ✓ In stock — ships in 2 business days from US inventory
$438
Price held 7 days after order.
Genuine parts, no overseas wait
The genuine xWASH internal PSU
The power supply (P/N 92011-01) is the genuine Nexa3D internal DC unit that powers the xWASH electronics — touchscreen, control PCB and motor drive. It drops in as a direct replacement, so a wash station that will not power up is back in service without guesswork.
An applications engineer on the line
Not sure whether the power supply or the control PCB failed? Our engineers support the Nexa3D systems we sell — sub-4h reply, NDA standard.
About this product
Compatibility & Specifications
This power supply (P/N 92011-01 Rev A) is the genuine Nexa3D internal DC power supply for the xWASH automated parts washer. It converts incoming mains power to the regulated voltages that run the wash station’s touchscreen, control PCB and motor drive. Fit it as a direct replacement when the xWASH will not power up, resets under load, or shows symptoms of a failed internal supply.
Why Source Through Additive Plus
Genuine Nexa3D hardware, stocked and supported in the US for the machines we sell. Ships in 2 business days — no overseas lead time on maintenance parts — with a response in under 24 hours.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | xWASH |
Other products teams run alongside Nexa3D xWASH Power Supply – Internal PSU for xWASH Parts Washer | P/N 92011-01
Hardware Maintenance
Nexa3D XiP Z-Stage Arm Assembly – Desktop Resin 3D Printer Spare | P/N 92131-01
OEM-grade Z-stage arm assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 92131-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D Z-stage arm — part 92131-01
- ✓ Carries the build platform on the Z axis
- ✓ In US stock — ships in 2 business days
From $161
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D AC Power Cord, IEC C13 to CEE 7/7 (EU Schuko), 8 ft for NXE 400 / 400Pro | P/N 50144-02
Genuine Nexa3D 8 ft AC power cord for the NXE 400 / 400Pro — IEC C13 to a CEE 7/7 (Type F / Schuko) plug for European mains.
- ✓ OEM Nexa3D P/N 50144-02 Rev A — NXE 400 / 400Pro
- ✓ 8 ft · IEC C13 to CEE 7/7 (Type F / Schuko)
- ✓ In stock — ships in 2 business days from US inventory
From $29
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D 350 W Power Supply for NX-Platform 3D Printers – 48 V DC | P/N 50264-02
OEM-grade 48 V DC / 350 W power supply for Nexa3D NX-platform 3D printers — genuine replacement unit (part 50264-02), in US stock and ships in 2 business days.
- ✓ 48 V DC output, 350 W — Nexa3D part 50264-02
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $235
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D LE Blower Service Kit (1 Fan) for NXE Light Engine – P/N 11179-01
OEM-grade LE blower service kit (1 fan) for Nexa3D NX 3D printers — genuine light-engine cooling blower kit (part 11179-01), in US stock and ships in 2 business days.
- ✓ Single-fan cooling blower for the light engine — Nexa3D part 11179-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $29
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Painter's Tool 2.5″ Stainless Steel – Part-Removal Scraper
2.5-inch stainless-steel painter's tool for lifting finished prints off the build plate on Nexa3D resin printers. The flat, rigid blade slides under parts cleanly, so you remove them without gouging the plate or damaging the print.
- ✓ 2.5″ stainless-steel scraper / part-removal blade
- ✓ For use across Nexa3D resin printers (XiP, XiP Pro, NXE)
- ✓ Genuine Nexa3D tool · ships in 2 business days
From $35
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D xWASH Basket – Wash Station Parts Basket for Loose Prints | P/N 92005-01
Genuine Nexa3D xWASH basket — holds loose printed parts in the xWASH tank for even solvent agitation cleaning.
- ✓ OEM Nexa3D P/N 92005-01 Rev A — fits the xWASH parts washer
- ✓ Contains small and loose parts through the wash cycle
- ✓ In stock — ships in 2 business days from US inventory
From $259
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D XiP Pro Level Sensor Subassembly – Resin-Level Sensing | P/N 12523-01
OEM-grade resin-level sensor subassembly for the Nexa3D XiP Pro industrial resin 3D printer — genuine Nexa3D part 12523-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D level sensor subassembly — part 12523-01 (Rev A)
- ✓ Restores accurate vat resin-level sensing
- ✓ In US stock — ships in 2 business days
From $1029
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D 160W External Power Supply for XiP – 24V DC, 4-Pin DIN | P/N 52040-01
Genuine Nexa3D 160 W external power supply for the XiP platform — regulated 24 V DC output through a 4-pin DIN connector.
- ✓ OEM Nexa3D P/N 52040-01 Rev A — XiP platform
- ✓ 160 W · 24 V DC output · 4-pin DIN connector
- ✓ In stock — ships in 2 business days from US inventory
From $122
Add to cart
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machine is this power supply for?
The power supply (P/N 92011-01 Rev A) is a genuine Nexa3D part for the xWASH automated parts washer. It is the internal DC power supply and installs as a direct replacement for the original unit.
What does the power supply do?
It converts incoming mains power to the regulated DC voltages that run the xWASH electronics — the touchscreen, control PCB and motor drive. If the wash station will not power up or resets under load, a failed internal power supply is a common cause.
Is it an OEM part and how fast does it ship?
It is a genuine Nexa3D OEM power supply for the xWASH parts washer. It is in stock at our US facility and ships within 2 business days; contact us for multiple units or a purchase order.
Place your order, or talk to an engineer first
Order Nexa3D xWASH Power Supply – Internal PSU for xWASH Parts Washer | P/N 92011-01 direct, or talk to materials engineer