Dental 3D Printers

3D printers for sale designed for dental applications. Ideal for creating crowns, bridges, dentures, and orthodontic models, they deliver precision, speed, and reliability—helping dental professionals streamline workflows and improve patient care.

26 products From $46995 17 made in USA

Showing 1–8 of 26 Dental 3D Printers

3DCeram · CERAMIC SLA

3DCeram C101 EASY LAB Ceramic SLA 3D Printer – Lab & Material Development | 100×100×150 mm

Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.

Open parameters — qualify new ceramics & formulations, not just vendor recipes.
Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
Lead time: configured to order — install, training & scale-up support from California.

Build 3.9×3.9×5.9 in / 100×100×150 mm

Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

3DCeram · Multi-material Ceramic SLA

3DCeram C900 HYBRID Multi-Material Ceramic SLA 3D Printer – Up to 4 Materials | 300×300×100 mm

Production-scale multi-material ceramic SLA system: alongside the base ceramic it deposits up to three additional materials in one part, via dispensers from needle valve to micro-distribution, all in CPS 2.0. On an 11.8×11.8×3.9 in / 300×300×100 mm platform with a fine 35 µm UV laser. Full print → debind → co-sinter workflow supported by Additive Plus.

Up to 4 materials in one part — base ceramic + 3 dispensed materials.
Fine 35 µm UV laser — 355 nm, detail across the 300×300 mm platform.
Lead time: configured to order — material-set & co-sinter support from California.

Build 11.8×11.8×3.9 in / 300×300×100 mm

Prints ATZ, Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Tricalcium Phosphate, Zirconia 8Y

Get quote

On backorder

· Lead time: configured to order — request a build slot. Installation, training and process support included from California.

Farsoon Technologies · Metal LPBF

Farsoon FS121M — Compact Metal LPBF 3D Printer

Compact metal LPBF 3D printer with a fully open platform — unlock every parameter and run any qualified powder. Built for dental, medical and material-development teams getting into production metal.

Open platform — unlocked laser/scan/layer parameters + free powder choice for real R&D and material qualification.
Compact, production-grade — 120×120×100 mm build, 20 µm layers, 10+ alloys incl. dental CoCrMoW.
Official US Farsoon dealer — installation, training, parameter & warranty support by Additive Plus.

Request a quote →Talk to an engineer

Priced to your configuration · a named engineer replies within 24 hours · NDA on request.

Build 120×120×100 mm, 4.7×4.7×3.9 in

Get quote

In stock

Insstek · Directed Energy Deposition (DED) / DMT

InssTek MX-Med Medical DED Metal 3D Printer – Porous Titanium Implant Coating | 300×300×230 mm

The InssTek MX-Med is a DED metal 3D printer dedicated to medical work — a low-power 100 W laser and 200 µm beam that apply uniform porous titanium coatings to orthopedic implants for osseointegration, driven by DMT closed-loop melt-pool control across an 11.8×11.8×9.1 in / 300×300×230 mm envelope.

✔ Fine 100 W / 200 µm beam — delicate porous coatings without over-melting the substrate
✔ DMT closed-loop control — uniform, repeatable titanium layers
✔ Multi-axis motion follows curved implant geometry; argon ≤50 ppm O₂
✔ Lead time: configured to order — request a quote for delivery & installation

Build 11.8×11.8×9.1 in / 300×300×230 mm

Prints Titanium (CP Ti, Ti-6Al-4V)

Get quote

On backorder

· Lead time: configured to order — request a quote for delivery and installation.

AO Metal – High-Precision Metal 3D Printers for Innovation

A100 Metal 3D Printer — AO Metal

AO Metal A100 — a compact LPBF metal 3D printer, fully open and made in the USA. Largest Ø100×100 mm build, 300–1000 W fiber laser, optional 445 nm blue laser and 900 °C platform, 16+ metals incl. copper. From $99,000 · ships 12–16 weeks from order.

Build Ø100 x 100 mm (3.94" x 3.94")

Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1

From $99000

Add to cart

On backorder

★ Made in USA

AO Metal – High-Precision Metal 3D Printers for Innovation · Metal LPBF

A30 Metal 3D Printer — AO Metal

AO Metal A30 — an entry-level desktop LPBF metal 3D printer, fully open and made in the USA. Ø30×60 mm build, 200 W laser (300 W optional), 9 metals incl. gold and silver. A gateway to metal AM for R&D and education. From $59,000 · ships 12–16 weeks from order.

Build Ø30 x 60 mm (1.18" x 2.36")

Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1

From $59000

Add to cart

On backorder

AO Metal – High-Precision Metal 3D Printers for Innovation · Metal LPBF

A50 Metal 3D Printer — AO Metal

AO Metal A50 — a compact LPBF metal 3D printer, fully open and made in the USA. Ø50×100 mm build, 300–1000 W fiber laser, optional 445 nm blue laser and 900 °C platform, 16+ metals incl. copper. From $89,000 · ships 12–16 weeks from order.

Build Ø50 x 100 mm (1.97" x 3.94")

Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1

From $89000

Add to cart

On backorder

Farsoon Technologies · Metal LPBF

Farsoon FS200M-2

A medium-sized LPBF system with dual 500-watt lasers ideal for medium to high series metal production.

Build 16.7x9.1x11.8 in / 425x230x300 mm

Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1

Get quote

In stock

Dental 3D Printers

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)