★ Made in USA 
AO Metal · Metal LPBF
A50 Metal 3D Printer — AO Metal
An optional 445 nm blue laser and a 900 °C platform bring copper, gold, silver and crack-prone alloys within reach. Every parameter open — no cartridges, no annual licence: any metal powder you qualify, with validated parameters supplied for the standard alloys. Floor-standing LPBF, Ø50 × 100 mm (2.0 × 3.9 in) build, 300–1000 W. Designed and built in the USA. From $89,000 · 12–16 weeks. Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Build Ø50 x 100 mm (1.97" x 3.94")
Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1
Made to order
· 12–16 weeks
★ Made in USA 
AO Metal · Metal LPBF
A100 Metal 3D Printer — AO Metal
The same open platform as the A50, with four times the build area — Ø100 × 100 mm (3.9 × 3.9 in). Optional 445 nm blue laser and 900 °C platform for copper, gold, silver and refractory alloys; any metal powder you qualify, with validated parameters supplied for the standard alloys. Floor-standing LPBF, 300–1000 W, every parameter yours. Designed and built in the USA. From $99,000 · 12–16 weeks. Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Build Ø100 x 100 mm (3.94" x 3.94")
Prints 316L, 420, AlSi10Mg, Maraging Steel Grade 300, ST1
Made to order
· 12–16 weeks
3DCeram · CERAMIC SLA
3DCeram C101 EASY LAB Ceramic SLA 3D Printer – Lab & Material Development | 100×100×150 mm
Compact open-parameter ceramic SLA printer for research and material development — a 3.9×3.9×5.9 in / 100×100×150 mm build that starts a print from as little as 60 mL of ceramic. Develop your own process, then scale the same technology to 3DCeram production systems. Full print → debind → sinter workflow supported by Additive Plus.
- Open parameters — qualify new ceramics & formulations, not just vendor recipes.
- Print from 60 mL — 10 mL with SAM option · change ceramic in ~20 min.
- Lead time: configured to order — install, training & scale-up support from California.
Build 3.9×3.9×5.9 in / 100×100×150 mm
Prints Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Hydroxyapatite, Tricalcium Phosphate
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
3DCeram · Multi-material Ceramic SLA
3DCeram C900 HYBRID Multi-Material Ceramic SLA 3D Printer – Up to 4 Materials | 300×300×100 mm
Production-scale multi-material ceramic SLA system: alongside the base ceramic it deposits up to three additional materials in one part, via dispensers from needle valve to micro-distribution, all in CPS 2.0. On an 11.8×11.8×3.9 in / 300×300×100 mm platform with a fine 35 µm UV laser. Full print → debind → co-sinter workflow supported by Additive Plus.
- Up to 4 materials in one part — base ceramic + 3 dispensed materials.
- Fine 35 µm UV laser — 355 nm, detail across the 300×300 mm platform.
- Lead time: configured to order — material-set & co-sinter support from California.
Build 11.8×11.8×3.9 in / 300×300×100 mm
Prints ATZ, Silicon Nitride, Zirconia, Alumina, Aluminium Nitride, Cordierite, Fused Silica, Hydroxyapatite, Tricalcium Phosphate, Zirconia 8Y
Made to order
· Lead time: configured to order — request a build slot. Installation, training and process support included from California.
