Ceramic 3D Printing Filaments — Alumina, Zirconia, SiC

Ceramic Filament

Ceramic 3D printing filaments let you produce dense technical-ceramic parts on a standard FFF/FDM 3D printer — no powder bed and no six-figure machine. You print the green part, then debind and sinter it to a fully ceramic component (up to >99% density).Our Zetamix by Nanoe range covers the most-requested technical ceramics: Alumina (Al2O3) for heat resistance and electrical insulation, White Zirconia and Black Zirconia for exceptional toughness, Silicon Carbide (SiC) for extreme hardness, Porcelain for art and tableware, and Titanium Dioxide (TiO2) for specialty applications.We print these every day in-house on our 3DCeram M.A.T. system, so we can help you dial in printing, debinding and sintering. All filaments are in stock and ship from our Los Angeles warehouse. Talk to a materials engineer →

8 products From $225 17 made in USA

Showing 1–8 of 8 Ceramic Filament

3DCeram · FFF

Fila-MAT Alumina 1,75mm

Print dense alumina (Al₂O₃) ceramic parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to a technical-ceramic component.

✔ 295 MPa average flexural strength, 213 GPa elastic modulus and 3.9 g/cc after solid-state sintering at 1650°C
✔ Debind and sinter parameters plus the full datasheet included with every spool
✔ 1.75mm ceramic feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review

Get quote

In stock

· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.

3DCeram · FFF

Fila-MAT Silicon Carbide (SiC) Ceramic Filament 1.75mm – FFF for 3DCeram M.A.T.

Print silicon carbide (SiC) ceramic parts on the 3DCeram M.A.T. print-debind-sinter workflow — ESA/ESTEC-tested for high-temperature, high-conductivity applications.

✓ ESA/ESTEC-verified: 423 MPa flexural strength, 82 W/m-K thermal conductivity
✓ Solid-state sintered to 2100°C — dense, chemically inert, no powder bed
✓ Qualified for the 3DCeram M.A.T. platform — quote-based pricing, request a quote

Get quote

In stock

· Contact for lead time

Zetamix by Nanoe · FFF

Zetamix Alumina Filament 1,75mm

Print technical alumina (Al2O3) parts on a standard FFF printer, then debind and sinter to dense, high-temperature ceramic.

✔ Electrically insulating, very hard and wear-resistant, stable at high temperatures
✔ Print → debind → sinter to dense alumina — no powder bed, no special printer
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

From $495

Add to cart

In stock

Zetamix by Nanoe · FFF

Zetamix Black Zirconia Filament 1,75mm

All the strength and toughness of zirconia (ZrO2) in a deep, premium black sintered finish for technical and design parts.

✔ High toughness and wear resistance with a striking black finish
✔ Print → debind → sinter to dense ceramic on a standard FFF printer
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

From $550

Add to cart

In stock

Zetamix by Nanoe · FFF

Zetamix Porcelain Filament 1,75mm

Print fine porcelain on a standard FFF printer, then fire and glaze for art, tableware and decorative ceramic pieces.

✔ Smooth, glazeable porcelain finish with a classic ceramic look
✔ Print → debind → fire — ceramic printing on an everyday FFF machine
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

From $225

Add to cart

In stock

Zetamix by Nanoe · FFF

Zetamix Silicon Carbide Filament 1,75mm

Print silicon-carbide (SiC) parts on a standard FFF printer for extreme hardness, thermal stability and chemical resistance.

✔ Very high hardness, excellent thermal performance, chemically resistant
✔ Print → debind → sinter — advanced technical ceramic without a powder system
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

From $550

Add to cart

In stock

Zetamix by Nanoe · FFF

Zetamix TiO2 Filament 1,75mm

Print titanium-dioxide (TiO2) ceramic parts on a standard FFF printer — a specialty technical ceramic for niche applications.

✔ Specialty technical ceramic produced on an everyday FFF machine
✔ Print → debind → sinter to dense ceramic, no powder system required
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

From $550

Add to cart

In stock

Zetamix by Nanoe · FFF

Zetamix White Zirconia Filament 1,75mm

Print tough zirconia (ZrO2) parts on a standard FFF printer, then sinter to dense technical ceramic with a clean white finish.

✔ High toughness and flexural strength, wear- and corrosion-resistant
✔ Print → debind → sinter to dense zirconia on a desktop FFF machine
✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)

Prints Zirconia (ZrO2)

From $485

Add to cart

In stock

Ceramic Filament

Have a CAD? Have a quote in 24h.

Request a Quote

Request a Quote

Request a Quote

Request a Quote

Get My Quote

Scan My Object

Request a 3D Printing Quote

Get Instant Quote

Cart (0)