Showing 205–216 of 237 results
-
Al-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. ThAl-Si-Ni Aluminium Metal Powder
Al-Si-Ni is an Al-Si-Ni alloy with good processability via PBF and increased working temperature. The alloy can be used both after annealing or standard T6 temper. T6 temper ensures the better strength
performance. The alloy can be used as structural material for various applications (automotive, aerospace, etc.) under the heating up to 250°С. -
Al-Mg-Sc Aluminium Metal Powder
Al-Mg-Sc is a corrosion resistant Al-Mg-Sc alloy with improved performance in heat treated state. ThAl-Mg-Sc Aluminium Metal Powder
Al-Mg-Sc is a corrosion resistant Al-Mg-Sc alloy with improved performance in heat treated state. The parts or samples do not require solution treatment followed by quenching. High properties are achieved
after conventional annealing. Sc concentration was adjusted so as to provide an optimal high tensile characteristics to price ratio. Parts can be machined, welded, polished, coated or treated otherwise like
conventional Al-Mg products. -
Al-Si-Cu Aluminium Metal Powder
Al-Si-Cu is a novel Al-Si-Cu alloy with high processability via PBF. The alloy can be used both afteAl-Si-Cu Aluminium Metal Powder
Al-Si-Cu is a novel Al-Si-Cu alloy with high processability via PBF. The alloy can be used both after annealing or T6 temper. Heat treatment improves the elongation and decreases internal stresses. T6 temper ensures better fatigue performance, with slightly lower strength. Building rates are equal or better than ones for AlSi10Mg alloy. RS-320 alloy can be used as the substitution of casting and some wrought aluminium alloys with medium strength.
-
AlSi7Mg Aluminium Metal Powder
AlSi7Mg – is the common aluminium Al-Si alloy with good casting properties showing high performancAlSi7Mg Aluminium Metal Powder
AlSi7Mg – is the common aluminium Al-Si alloy with good casting properties showing high performance during powder bed fusion.
The alloy offers good strength and better ductility than for AlSi10Mg alloy. Printed samples and parts can be annealed or water quenched for various applications.
The properties are equal or superior to traditional casting A356 type alloys.
As-sintered parts can be treated in a similar manner as for casted parts -
AlSi10Mg Aluminium Metal Powder
AlSi10Mg – is the traditional aluminium alloy with good casting properties and performance duringAlSi10Mg Aluminium Metal Powder
AlSi10Mg – is the traditional aluminium alloy with good casting properties and performance during powder bed fusion. Alloy offers good strength and ductility after annealing. Properties are equal or superior to traditional casting Al-Si alloys. Printed parts can be treated in a similar manner as for casted parts.
-
C101 EASY LAB
The 3D printer to develop & prototype then scale up on the C3600 ULTIMATE
-
C900 HYBRID
In order to print a second, or more, material at the same time.
-
Silicon Nitride 3D Printing Paste
NON OXIDE CERAMICS The Silicon Nitride is among the hardest and most resistant technical ceramics.Silicon Nitride 3D Printing Paste
NON OXIDE CERAMICS
The Silicon Nitride is among the hardest and most resistant technical ceramics. It has also a high resistance to thermal shocks, to wear and corrosion (liquid and gas). Its application is found in the components of pumps and valves, semiconductors among others. -
Aluminium Nitride 3D Printing Paste
NON OXIDE CERAMICS The high mechanical properties of this ceramic, combined with high thermal conduAluminium Nitride 3D Printing Paste
NON OXIDE CERAMICS
The high mechanical properties of this ceramic, combined with high thermal conductivity and electrical insulation, are highly recommended in electronics industry. -
Hydroxyapatite 3D Printing Paste
OXIDE CERAMICS Hydroxyapatite/TCP: material used in the biomedical applications for the manufactureHydroxyapatite 3D Printing Paste
OXIDE CERAMICS
Hydroxyapatite/TCP: material used in the biomedical applications for the manufacture of the osseous substitutes, chemical composition close to bone. -
Fused Silica 3D Printing Paste
OXIDE CERAMICS Silice ceramics suit foundry cores and optical applications requirements.Fused Silica 3D Printing Paste
OXIDE CERAMICS
Silice ceramics suit foundry cores and optical applications requirements. -
Tricalcium Phosphate 3D Printing Paste
OXIDE CERAMICS TCP or Tricalcium Phosphate is a material often used for implants in the medical fieTricalcium Phosphate 3D Printing Paste
OXIDE CERAMICS
TCP or Tricalcium Phosphate is a material often used for implants in the medical field, especially to recreate parts close to the structure of a spine.
