Out of stock
- Validated cure profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
xFLEX475-Black is a medium-soft, rubber-like elastomer — 150% elongation at failure, up to 50% energy return, solvent-resistant.
- ✓ Resilient with snap-back and tear resistance — pipes and manifolds, handles, seals, gaskets, midsoles
- ✓ 150% elongation at failure, up to 50% energy return, resistant to most solvents
- ✓ Genuine Nexa3D resin for the XiP · 1.5 kg cartridge · not in stock, available on request
$416
What your process engineer actually checks
Validated, load-and-print cure profiles
Every resin ships with a tested exposure/cure profile for the printers we sell and a datasheet covering viscosity, cure energy, mechanical properties, and shelf life. Dial the build in once, reorder the same chemistry.
An materials engineer on the line
Questions on layer adhesion, post-cure schedules, elongation, yellowing, or chemical resistance? A materials engineer answers directly. Most replies in under 4 hours, NDA standard.
CHARACTERISTICS
- Soft elastic
- A single component with low viscosity
Resilience, snap back and tear resistance elastomeric applications
- pipes and manifolds,
- handles and grips
- seals and gaskets
- sportswear and footwear midsoles
PHYSICAL AND MECHANICAL PROPERTIES
| Tensile Modulus | ASTM D638 | 4.6 MPa |
| Ultimate Tensile Strength | ASTM D638 | 3.8 MPa |
| Tensile Strength | ASTM D790 | 55 MPa |
| Shore Hardness | ASTM D2240 | 55 A |
| Energy Return | Internal | 39.13% |
| Tear Strength | ASTM D624 | 11.77 kN/m |
| Tensile Elongation at Break | ASTM D638 | 159% |
downloads
| Brand | Nexa3D |
| Available colors | Black |
| Weight | 1.5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Platform | XiP, XIP PRO |
| Technology | LSPc, DLP, XiP |
| Resin Type | Flexible |
| Application | Engineering, Manufacturing |
We formulate and qualify. Custom variants on request.
Need a tuned resin, a filled or castable formulation, or a profile for a printer we don't list yet? Our materials team qualifies custom formulations and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg
HDT100°C ABS/PP alternative: Tough end-use parts & tooling. High impact/elongation.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
- PLA filament for FibreSeeker 3 — fast prototypes and fiber-reinforced parts
- 1.75 mm, grey
In stock
· In stock · ships from the US
Precise, flexible resin for orthodontic indirect bonding trays that release cleanly.
- ✓ Sets brackets accurately, then flexes for easy, non-stick release
- ✓ Biocompatible resin purpose-built for IBT workflows
- ✓ 1 kg bottle for Nexa3D NXE / NX series printers (LSPc)
In stock
· 2 Business Days
General Purpose Photopolymer (GPP) for high-throughput, high-accuracy production and prototyping on the Nexa3D NXE 400 and NXE 400 Pro. BASF-formulated for injection-mould-quality surface finish, low shrinkage and fast print speed, with 30 MPa ultimate tensile strength, 2100 MPa tensile modulus, 84 D Shore hardness and a 93 °C glass transition. The gray finish shows draft lines, parting seams and surface defects that clear resins hide. Supplied to order in 5 kg (12 lb) jerricans.
Made to order
· Contact for lead time
Lightweight. Thermally conductive. Heat-treatable. Genuine Carpenter PowderRange® AlSi10Mg aluminum alloy for LPBF metal 3D printing.
- ✓ Gas-atomized — COA on request (20–63 µm, 10 kg package)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ In US stock — ready to ship
In stock
· In US stock · ready to ship
A-Powder 316L — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
Made to order
· Ship date confirmed after you order
Made to order
· Contact for lead time
Fast-calibration black resin (3x speed!) for professional finishes on SLA/DLP printers.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printer is xFLEX475-Black compatible with?
How flexible is xFLEX475-Black?
What is xFLEX475-Black used for?
Place your order, or talk to an engineer first
Order Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg direct, or talk to materials engineer