Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
Hardware Maintenance
Nexa3D xCURE Controller PCB – Post-Curing Station Main Board | P/N 30106-02
OEM-grade controller PCB for the Nexa3D xCURE post-curing station — genuine Nexa3D part 30106-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D main control board — part 30106-02 (Rev C) for the xCURE post-curing unit
- ✓ Drives the UV LED array, heater, front display, and stored cure profiles
- ✓ In US stock — ships in 2 business days
$1,176
Price held 7 days after order.
Genuine parts, from a team that runs these machines
OEM-grade replacement board
Part 30106-02 is the genuine Nexa3D controller for the xCURE — the exact board specified for the unit, not a generic substitute. Matched by part number so it drops into your post-curing station and drives the LED array, heater, and cure profiles as designed.
US inventory, ships in 2 days
In stock at our US facility — no overseas lead time on maintenance parts. Order before the daily cutoff and it ships in 2 business days. Not sure of the right revision? Our engineers work on these machines and reply in under 24 hours.
About this product
Compatibility & Specifications
This is the genuine Nexa3D controller PCB — part number 30106-02 (Rev C) — the main control board for the Nexa3D xCURE post-curing station. It manages the unit’s dual-wavelength 365 + 405 nm UV LED array, the heating element, the front display, and the stored resin cure profiles that drive the xCURE’s UV-only, heat-only, and UV + heat modes. Match part number 30106-02 against your machine’s bill of materials, or the marking on the board you are replacing, before ordering — control-board revisions are specific to the unit.
Why Source Through Additive Plus
Additive Plus is a US-based Nexa3D partner — we stock and service the machines these parts go into. Order the genuine OEM spare from US inventory, with a sub-24-hour response from engineers who work on these machines, instead of waiting on overseas lead times. Replacing a controller board involves mains-powered electronics — have it fitted by a qualified technician. Need several units or an official purchase order for a department? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NX |
Other products teams run alongside Nexa3D xCURE Controller PCB – Post-Curing Station Main Board | P/N 30106-02
Hardware Maintenance
Nexa3D 350 W Power Supply for NX-Platform 3D Printers – 48 V DC | P/N 50264-02
OEM-grade 48 V DC / 350 W power supply for Nexa3D NX-platform 3D printers — genuine replacement unit (part 50264-02), in US stock and ships in 2 business days.
- ✓ 48 V DC output, 350 W — Nexa3D part 50264-02
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $235
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Vat Tag for XiP – Resin Vat Identification Tag | P/N 52270-01
Genuine Nexa3D Vat Tag for the XiP platform — the OEM identification tag fitted to the resin vat.
- ✓ OEM Nexa3D P/N 52270-01 Rev A — XiP platform
- ✓ Direct replacement for a lost or damaged vat tag
- ✓ In stock — ships in 2 business days from US inventory
From $2
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D xCURE Knob – 3/4 in OD × 6 mm Black, Post-Curing Station | P/N 50395-01
OEM-grade replacement knob for the Nexa3D xCURE post-curing station — genuine Nexa3D part 50395-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D knob — 3/4 in (19 mm) OD × 6 mm bore, black
- ✓ Direct OEM replacement — part 50395-01 (Rev A)
- ✓ In US stock — ships in 2 business days
From $15
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Power Entry Module for NX-Platform 3D Printers – IEC Mains Inlet | P/N 50295-01
OEM-grade power entry module for Nexa3D NX-platform 3D printers — genuine mains inlet assembly (part 50295-01), in US stock and ships in 2 business days.
- ✓ IEC mains inlet with integrated fuse holder and line filtering — Nexa3D part 50295-01
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
From $58
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D LE LED Cable Set for NXE Light Engine 3D Printers
OEM-grade LE LED cable set for Nexa3D NXD 3D printers — genuine light-engine LED cable harness (LE LED cable set), in US stock and ships in 2 business days.
- ✓ Powers and signals the NXE light-engine LED array — Nexa3D LE LED cable set
- ✓ Fits Nexa3D NXD systems — match by your printer model and light-engine revision
- ✓ In US stock — ships in 2 business days
From $195
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D Fuse Set for xCURE Post-Curing Station – P/N 11380-01
OEM-grade replacement fuse set for the Nexa3D xCURE post-curing station — genuine Nexa3D part 11380-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D fuse set — part 11380-01 for the xCURE post-curing unit
- ✓ Match by part number to your machine's BOM before ordering
- ✓ In US stock — ships in 2 business days
From $14
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D XiP Z-Stage Assembly – Desktop Resin 3D Printer Z-Axis | P/N 12305-01
OEM-grade complete Z-axis stage assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 12305-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D Z-stage assembly — part 12305-01 (Rev A)
- ✓ Complete Z-axis drive for the build platform
- ✓ In US stock — ships in 2 business days
From $1185
Add to cart
In stock
· 2 Business Days
Hardware Maintenance
Nexa3D 10 kg Straight-Bar Load Cell for NX-Platform Resin 3D Printers – P/N 50116-01
Genuine Nexa3D 10 kg straight-bar load cell (P/N 50116-01) — the force-sensing strain-gauge element used in NX-platform LSPc resin 3D printers. In stock at our US facility, ships in 2 business days.
- ✓ 10 kg rated capacity, straight-bar strain-gauge design
- ✓ Genuine Nexa3D replacement — matched output, no recalibration guesswork
- ✓ In US stock · ships in 2 business days
From $29
Add to cart
In stock
· 2 Business Days — in stock at our US facilityCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machine is the xCURE Controller PCB compatible with?
The xCURE Controller PCB (Nexa3D part 30106-02, Rev C) is the main control board for the Nexa3D xCURE post-curing station. It is not used in the xWASH or in Nexa3D resin printers. Confirm the part number against your unit's bill of materials, or the marking on the board you are removing, before ordering — control-board revisions are specific to the machine.
Is this a genuine Nexa3D part or a third-party replacement?
This is a genuine Nexa3D OEM controller PCB, part number 30106-02 — the same board specified for the xCURE post-curing station. Additive Plus is a US-based Nexa3D partner and supplies the part from US inventory, so you receive the exact factory component rather than an untested generic board.
Do I need any setup or firmware after replacing the controller PCB?
Replacing the xCURE controller PCB is a service operation on a mains-powered unit and should be carried out by a qualified technician. After fitting the board, the xCURE firmware and cure profiles may need to be reloaded per Nexa3D's service procedure. Our engineers can point you to the correct steps — reach out before you start and we will reply within 24 hours.
Place your order, or talk to an engineer first
Order Nexa3D xCURE Controller PCB – Post-Curing Station Main Board | P/N 30106-02 direct, or talk to materials engineer