In stock
Nexa3D Snap-In PCB Standoff for Raspberry Pi Board (XiP Resin 3D Printer) – P/N 52286-01
Genuine Nexa3D snap-in PCB standoff (P/N 52286-01) — the board support that mounts the Raspberry Pi controller inside the XiP resin 3D printer. In stock at our US facility, ships in 2 business days.
- ✓ Snap-in standoff / board support for the Raspberry Pi controller
- ✓ Genuine Nexa3D service part, P/N 52286-01
- ✓ In US stock · ships in 2 business days
$0
Mount the board right
Genuine Nexa3D standoff
The snap-in board support Nexa3D specifies for the XiP (P/N 52286-01). Correct height and snap size to hold the Raspberry Pi controller securely — not a generic standoff that may sit loose or not clip in.
Ships in 2 business days
In stock at our US facility. Small part, no overseas lead time — order it with the rest of your service kit and keep your XiP in production. Sub-24h response from a team that runs these machines.
Compatibility & Specifications
This snap-in PCB standoff, Nexa3D P/N 52286-01, supports and secures the Raspberry Pi controller board inside the XiP desktop resin 3D printer. It snaps into the chassis and holds the board at the correct height without screws. Supplied as the genuine Nexa3D part.
- Part number: 52286-01 (Rev A)
- Type: Snap-in PCB standoff / board support
- Brand: Nexa3D — genuine service part
- Compatibility: Nexa3D XiP resin 3D printer — Raspberry Pi controller board mount. Confirm the part number against your printer’s service parts list
Why Source Through Additive Plus
It is a small part, but the wrong height or snap size lets the board sit loose or fail to clip in. We sell and support the XiP and stock the genuine standoff (P/N 52286-01). It is kept in US inventory and ships in two business days, with no overseas lead time on maintenance parts. Building a service kit or need a purchase order? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | XiP |
Other products teams run alongside Nexa3D Snap-In PCB Standoff for Raspberry Pi Board (XiP Resin 3D Printer) – P/N 52286-01
The genuine Nexa3D Everlast-2 membrane keeps your XiP producing clean, consistent parts — print after print.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — second-generation interface for sharp feature definition
- ✔ Ships from our Los Angeles warehouse in 5–15 business days
Order a spare today — a worn membrane shouldn’t cost you a print day.
In stock
· 5–15 Business Days
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
OEM threaded-stud rubber bumper with a steel base plate for the Nexa3D XiP desktop resin 3D printer — the genuine vibration-damping foot that supports and stabilises the machine, supplied to Nexa3D part number 52269-01 (Rev A).
- ✓ Genuine Nexa3D spare · P/N 52269-01-RevA
- ✓ Threaded-stud mount · steel base plate · rubber damping
- ✓ For the Nexa3D XiP · in US stock · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D touchscreen module (P/N 92007-01 Rev A) for the xWASH automated parts washer — the HMI panel used to set and start wash cycles.
- ✓ OEM Nexa3D P/N 92007-01 Rev A — xWASH parts washer
- ✓ Touchscreen HMI control panel · direct replacement
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
OEM-grade LCD interface DisplayPort board for Nexa3D NX 3D printers — genuine light-engine interface board (part 32032-01), in US stock and ships in 2 business days.
- ✓ Routes the DisplayPort signal to the LE5 light-engine LCD — Nexa3D part 32032-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
OEM-grade industrial control computer for Nexa3D NX-platform 3D printers — genuine embedded controller PC (part 50294-01), in US stock and ships in 2 business days.
- ✓ Embedded controller PC for NX-platform printers — Nexa3D part 50294-01
- ✓ Fits Nexa3D NX-platform systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
OEM-grade touchscreen display assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 12251-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D touchscreen — part 12251-02 (Rev A)
- ✓ Front display for starting prints and running maintenance
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D replacement resin vat container for the XiP desktop resin 3D printer — the rigid outer tray that holds the Everlast membrane and resin during printing. In stock at our US facility, ships in 2 business days.
- ✓ Outer vat container / tray for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part — pairs with the XiP Everlast membrane
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facilityCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What does this standoff do?
Is this a genuine Nexa3D part?
How quickly does it ship?
Place your order, or talk to an engineer first
Order Nexa3D Snap-In PCB Standoff for Raspberry Pi Board (XiP Resin 3D Printer) – P/N 52286-01 direct, or talk to materials engineer