Made to order
UltiMaker S3/S5 Printhead Assembly – Genuine Print Head | P/N 225661
Genuine UltiMaker replacement print head for the S3 and S5 — a complete assembly with printhead cable, PCB, cooling fans, nozzle seal and clamp clips to restore print quality and cut downtime.
- ✓ OEM UltiMaker P/N 225661 (supersedes 219259) — fits S3, S5 & S5 Pro Bundle
- ✓ Complete unit: cable, PCB, fans, nozzle seal, clamp clips
- ✓ Genuine part — made to order, typical lead time 1–2 weeks
$497
Genuine parts, minimal downtime
Complete OEM assembly
Genuine UltiMaker P/N 225661 ships as a full head — cable, PCB, cooling fans, nozzle seal and clamp clips — so a failed printhead is a single, clean swap rather than a hunt for individual components.
An applications engineer on the line
Not sure the printhead is the failed part, or need help with the replacement? Our engineers support UltiMaker S-line machines directly — sub-4h reply, NDA standard.
Genuine UltiMaker replacement print head (P/N 225661) for the UltiMaker S3 and S5. A complete assembly — printhead cable, PCB, cooling fans, nozzle seal and clamp clips — to restore print quality and cut downtime after a failed or worn head.
Compatibility & What’s Included
The UltiMaker S3/S5 Printhead Assembly (P/N 225661, supersedes 219259) fits the UltiMaker S3 and UltiMaker S5 / S5 Pro Bundle. It ships as a complete unit: printhead cable, printed circuit board (PCB), cooling fans, nozzle seal and clamp clips. Print cores are not included — they transfer from your existing head. Designed for straightforward field replacement to get a down machine back into production.
Why Source Through Additive Plus
A genuine UltiMaker part — not a generic substitute — for the machines we sell and support. US-based inventory and engineers who can walk you through the swap, with a response in under 24 hours.
| Brand | UltiMaker |
| Technology | FFF |
| Part number | 225661 (supersedes 219259) |
| Compatible printers | UltiMaker S3, UltiMaker S5, S5 Pro Bundle |
| Included components | Printhead cable, PCB, cooling fans, nozzle seal, clamp clips |
| Country of origin | Netherlands |
Other products teams run alongside UltiMaker S3/S5 Printhead Assembly – Genuine Print Head | P/N 225661
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Genuine Sygnis UV module for the F-NIS 3D printer — 365 nm and 405 nm post-processor-controlled diodes that upgrade the machine from version A to version B.
- ✓ Dual-wavelength: 365 nm + 405 nm UV curing
- ✓ Post-processor-controlled diodes — self-installed A→B upgrade
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
OEM pour spout for the 1 L (1 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-02 (Rev B).
- ✓ Genuine Nexa3D spare · P/N 12053-02-RevB
- ✓ Fits the 1 L (1 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D accessory package for the Nexa3D XiP Pro industrial resin 3D printer. Sourced from a US-based Nexa3D partner — confirm the current pack contents before ordering.
- ✓ Bundle of genuine Nexa3D XiP Pro accessories
- ✓ Contents can vary by revision — we confirm the pack list for your unit
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business DaysElongated conical polyethylene dispensing tips for medium- and high-viscosity fluids and pastes — the most versatile nozzle for initial material tests, color-coded by diameter for fast changeovers.
- ✓ Conical PE tips with UV-light-blocking additive, 31.75 mm length
- ✓ Color-coded by inner diameter · sold in multi-packs (see selected option)
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facilityCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers is the 225661 printhead assembly compatible with?
Is this a genuine UltiMaker part or a third-party replacement?
What is included, and do I need to move my print cores over?
Place your order, or talk to an engineer first
Order UltiMaker S3/S5 Printhead Assembly – Genuine Print Head | P/N 225661 direct, or talk to materials engineer