In stock
Nexa3D LCD Protective Glass Kit for XiP – Screen Shield
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
$45
Looking for Nexa3D resins? They are discontinued. See current replacements →
Resin drips and stray scratches are the enemy of the XiP’s masking LCD. This protective glass kit takes the abuse instead of the screen — a low-cost consumable standing between everyday handling and one of the printer’s most expensive components.
Compatibility & Specifications
- Type: protective glass that covers the masking LCD
- Function: shields the 9.3″ 4K screen from resin, dust and scratches
- Compatible printer: Nexa3D XiP desktop resin printer (not XiP Pro)
- Part: genuine Nexa3D XiP LCD protective glass kit (XIP_GLASS_KIT)
- Replace when: scratched, clouded, resin-fouled or after any leak onto the screen
Why Source Through Additive Plus
Genuine Nexa3D consumables, stocked in the US and shipped in about two business days. Keeping a spare on the shelf means a resin spill costs you a glass, not an LCD. Sub-24-hour response from engineers who run these printers. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | XiP |
Other products teams run alongside Nexa3D LCD Protective Glass Kit for XiP – Screen Shield
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer's internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Replacement masking LCD module for the Nexa3D XiP Pro industrial resin printer — the display that defines every cured layer under the light engine. A worn LCD shows as dim zones, stuck pixels or incomplete cures; this drop-in module restores full-resolution output.
- ✓ Masking LCD module for the XiP Pro light engine
- ✓ Direct replacement for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Luer-lock tip caps for Sygnis F-NIS syringe barrels — an airtight seal so you can pre-fill, store and ship barrels without waste.
- Pack of 20 · $30
- One cap fits 10, 30 and 55 ml barrels
- Airtight luer-lock seal
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
Replacement LED module for the Nexa3D XiP Pro — the UV light source that cures resin through the masking LCD. As LEDs age, output drops and cures become uneven or slow; a fresh module restores consistent, full-area curing.
- ✓ UV LED light-engine module for the XiP Pro
- ✓ Direct replacement for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
General-purpose pistons for Sygnis F-NIS syringe barrels: the tapered face spreads the air pressure evenly and the wiper keeps the barrel wall clean.
- Pack of 20 · $55 (10 ml) or $65 (30/55 ml)
- Sizes 10 ml or 30/55 ml — one piston covers 30 and 55 ml
- Fits every F-NIS 23151 version, A to E
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.
- Heated 10 ml cartridge head, up to 60 °C
- Upgrades F-NIS Version B to Version C — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeksWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer is this protective glass for?
Is this a genuine Nexa3D part?
When should I replace the protective glass?
Place your order, or talk to an engineer first
Order Nexa3D LCD Protective Glass Kit for XiP – Screen Shield direct, or talk to materials engineer