Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
In every order
- Lot-matched pellets genuine TotalEnergies 4720WZ food-grade PP, sealed 2 lb unit
- Processing sheet melt/mold guidance and key properties
Materials, Other 3D Printing Materials, Other Equipment, Plastic Injection Molding Machine, Plastic Pellets
Polypropylene (PP-FDA) 4720WZ Natural Pellets - 2 lbs
Nucleated PP for fast-cycle injection molding. Offers high stiffness, impact resistance, and antistatic properties for durable consumer goods and furniture.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
$75
Price held 7 days after order.
NDA standard
Ships in 1–2 business days
What your process engineer actually checks
What your process engineer actually checks
Food-contact PP that cycles fast
4720WZ is a nucleated impact copolymer with FDA-grade food-contact compliance and a 25 MFR: it fills thin walls quickly and demolds early for short cycles, while antistatic behavior keeps parts clean. Every unit ships with molding guidance so parts stay consistent.
A materials engineer on the line
Questions on food-contact compliance, cycle optimization, or grade selection? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
About this product
PP-FDA 4720WZ is a nucleated impact-copolymer polypropylene with FDA-grade, food-contact compliance and a high 25 MFR — engineered for fast-cycle molding of durable consumer goods, with built-in antistatic behavior. Based on the TotalEnergies 4720WZ grade.
Why engineers choose PP-FDA 4720WZ
Food-contact polypropylene that runs fast and stays clean.
FDA-grade
Formulated for food-contact compliance, so it clears review for kitchen storage, housewares, and consumer parts.
Fast cycling
Nucleation speeds crystallization for early demolding, cutting cycle time on high-volume parts.
High impact & stiffness
1,447 MPa flexural modulus with impact-copolymer toughness for durable, load-bearing consumer goods.
Antistatic finish
Built-in antistatic behavior reduces dust attraction, keeping finished consumer parts cleaner.
How we supply it
Genuine resin, ready to mold, with the parameters your process engineer needs.
Step 01
Sourced & lot-traced
Genuine TotalEnergies 4720WZ food-grade PP, packed in sealed 2 lb units and shipped from US stock. Minimum order 5 units.
Step 02
Mold ready
Polypropylene absorbs little moisture, so drying is not typically required. Store sealed in a dry place before use.
Step 03
Molding parameters included
Melt 200–260°C (392–500°F), mold 40–80°C (104–176°F). The high 25 MFR fills thin walls easily.
Typical applications
Food-contact and durable everyday parts.
Food-contact housewares
Kitchen storage & containers
Storage boxes
Durable consumer goods
Garden furniture
Indoor & outdoor
Thin-wall packaging
High-flow filling
Lawn & garden
Equipment components
Consumer goods
Everyday durables
Key properties
| Property | Value |
|---|---|
| Compliance | FDA-grade (food-contact) |
| Melt flow rate (MFR) | 25 g/10 min |
| Density | 0.905 g/cm³ |
| Tensile strength at yield | 27.5 MPa |
| Flexural modulus | 1,447 MPa |
| Heat deflection temp (HDT B) | 90°C |
| Melt / mold temperature | 200–260°C / 40–80°C |
Polypropylene absorbs little moisture; drying is not typically required. Store sealed and dry.
Not sure PP-FDA 4720WZ is the right grade?
Compare it with other APSX injection-molding pellets we stock.
Tell us your part and whether it needs food-contact compliance — a materials engineer will confirm whether PP-FDA 4720WZ or another grade is the right fit. Sub-4h reply, NDA standard.
Why source pellets through Additive Plus
- Injection-molding feedstock, ready to run — genuine grades matched to the APSX-PIM and standard molders, packed in convenient 2 lb units.
- US stock, fast dispatch — ships in 1–2 business days; no overseas lead times on material.
- Engineer on the line — compliance questions, parameters, and grade selection from a team that molds these materials, not a call center.
| Brand | APSX |
| Country of origin | USA |
| Platform | Injection Molding |
| Solid Density g/cm3 | 0.905 |
| Melt Flow Rate (MFR) g/10 min | 25 |
| Tensile Strength at Yield (MPa) | 27.5 |
| Elongation at Yield % | 6.0 |
| Flexural Modulus (MPa) | 1447 |
| Heat Deflection Temp (HDT B) °C | 90 |
Need a different grade or color?
We stock 20+ injection-molding grades — including food-grade PP and HDPE, plus PC, acetal, TPE and TPO — and can match a resin to your part and compliance needs. Custom colors and volume packs available.
Other products teams run alongside Polypropylene (PP-FDA) 4720WZ Natural Pellets - 2 lbs
Ceramic 3D Printing Materials · CERAMIC SLA
Zirconia 3Y 3D Printing Paste
Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.
- ✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
- ✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Dental · LSPc, DLP, XiP
Nexa3D KeySplint Hard Resin 1kg For NX
KeyPrint® KeySplint Hard® is a light-curing resin for the 3D printing of flexible biocompatible dental devices for use with DLP printers (385-405nm).
Choose your color: Light Violet, Translucent or Translucent Clear.
From $464
Add to cart
In stock
DLP 3D Printing Materials
Loctite 3D Cleaner C — IPA-Free Resin Cleaner for SLA/DLP Parts | 18 kg
IPA-free cleaning liquid that removes uncured resin from SLA and DLP 3D-printed parts before UV curing — non-flammable at ambient temperature and water-rinseable.
- ✓ Holds >15% dissolved resin vs IPA under 10% — fewer changeouts
- ✓ IPA-free, high flash point (75 °C), water-rinseable
- ✓ 18 kg · ships in 1–2 business days from US stock
From $297
Add to cart
In stock
· 2 Business Days — ships from US inventory.
Composite Tooling · DIW
Sygnis Silicone for Direct Ink Writing (DIW) — Printable Silicone Ink | 20–80 Shore A
Printable liquid silicone for Direct Ink Writing (DIW) — low viscosity for clean extrusion and low-temperature curing, in a tunable 20–80 Shore A hardness range for flexible, durable printed parts.
- ✓ 20–80 Shore A · service range −50 °C to 200 °C
- ✓ Low viscosity, low-temperature cure · bonds to metal, glass, ceramic, plastic
- ✓ For DIW / paste-extrusion printing · priced per configuration
In stock
· Priced and shipped per configuration — hardness grade, pack size and lead time confirmed at quote.
Media blasting · Surface finishing
AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts
Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.
- ✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
- ✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
- ✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California
From $20560
Add to cart
On backorder
· 4-6 weeks
Composite Tooling · Metal LPBF
M300 Maraging Steel Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs
Maraging tool steel. Easy to harden. AM-proven. Genuine Carpenter PowderRange® M300 (1.2709) for LPBF, EBM & DED metal 3D printing.
- ✓ Exceptional strength & hardness after simple aging
- ✓ Low-distortion AM processability (vs. H13/M2)
- ✓ Full COA on every lot · small volumes · fast dispatch from L.A.
Prints 316L, M300
From $935
Get quote
On backorder
· Lead time on request
Iron Base · Metal LPBF
A-Powder 18Ni300 Maraging Steel Powder for Metal 3D Printing | LPBF Compatible – 10 kg / 22 lbs
Ultra-high-strength. Age-hardenable. Tooling-grade. Genuine AO Metal 18Ni300 maraging tool steel for LPBF metal 3D printing.
- ✓ Gas-atomized, low-oxygen — full COA per lot
- ✓ China-produced — workable volumes, no mill minimums
- ✓ Fast dispatch from Los Angeles
Prints 18Ni300
From $1090
Get quote
In stock
· 10–20 business days
Iron Base · Metal LPBF
A-Powder 17-4PH Stainless Steel Alloy Powder for Metal 3D Printing | LPBF Compatible – 10 kg / 22 lbs
High-strength. Heat-treatable. Corrosion-resistant. Genuine AO Metal 17-4PH precipitation-hardening stainless steel for LPBF metal 3D printing.
- ✓ Gas-atomized, low-oxygen — full COA per lot
- ✓ China-produced — workable volumes, no mill minimums
- ✓ Fast dispatch from Los Angeles
Prints 17-4PH
From $510
Get quote
In stock
· 10–20 business daysFrom teams molding food-contact PP
Unedited feedback from injection-molding shops.
★★★★★
Needed a food-safe PP for kitchen storage — this molds clean and the FDA grade cleared our review.
GT
Grace T. Product Engineer · Housewares
★★★★★
Fast cycles like the non-FDA 4820, but with the compliance we needed. Antistatic finish is a bonus.
OK
Owen K. Process Engineer · Consumer products
★★★★★
Reliable natural PP for containers. Consistent flow, easy to run.
LR
Lena R. Manufacturing Engineer · Packaging
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Is PP-FDA 4720WZ safe for food contact?
Yes — PP-FDA 4720WZ is an FDA-grade polypropylene formulated for food-contact applications, which is why it is used for kitchen storage and housewares. For a specific regulatory filing, we can supply the compliance documentation; contact a materials engineer to confirm it meets your exact requirement.
Do I need to dry PP-FDA 4720WZ before molding?
Not usually. Polypropylene absorbs very little moisture, so PP-FDA 4720WZ does not typically require drying. Store the sealed units in a cool, dry place and keep them closed until use. A short dry only helps if pellets have been exposed to humidity for a long time.
What melt and mold temperatures does PP-FDA 4720WZ need?
PP-FDA 4720WZ molds at a melt temperature of 200–260°C (392–500°F) with a mold temperature of 40–80°C (104–176°F). Its high 25 MFR fills thin walls quickly. These are starting points — a materials engineer can help tune them for your part and machine.
What is PP-FDA 4720WZ used for?
PP-FDA 4720WZ suits food-contact housewares and kitchen storage, containers and storage boxes, garden and outdoor furniture, thin-wall packaging, and lawn and garden equipment. Its food-grade compliance plus fast cycling make it a practical choice for durable consumer goods.
How is it different from the non-FDA PP 4820WZ?
Both are nucleated impact copolymers from the same family. PP-FDA 4720WZ is formulated for food-contact compliance and has a 25 MFR, while PP 4820WZ is a higher 35 MFR grade for non-food parts. Choose 4720WZ when your part touches food; choose 4820WZ for the fastest cycles on general parts.
How is PP-FDA 4720WZ packaged and what is the minimum order?
PP-FDA 4720WZ ships in sealed 2 lb units, and the minimum order is 5 units (10 lbs total). Larger volumes and official purchase orders are welcome — contact us for volume pricing. Material ships from US stock, typically within 1–2 business days.
Will PP-FDA 4720WZ run on the APSX-PIM desktop molder?
Yes. PP-FDA 4720WZ is formulated for desktop and standard injection molding, including the APSX-PIM. Its high flow makes it easy to fill on smaller machines. Our team can confirm shot size and parameters for your specific mold.
Place your order, or talk to an engineer first
Order Polypropylene (PP-FDA) 4720WZ Natural Pellets - 2 lbs direct, or talk to materials engineer