In stock
- Material certification included
- Mutual NDA before any file or spec review
SLM 280 Ti64 Build Plate | Titanium SLM 280 Build Platform
What your process engineer actually checks
Flat, stable, and ready for production
Every build plate is manufactured from certified material, precision-machined, and inspected before shipment. Critical dimensions, flatness, thickness, and mounting features are verified to ensure reliable installation and repeatable print results.
Machine-ready compatibility
Build plates are available for EOS, Renishaw, SLM Solutions, Nikon, Trumpf, Additive Industries, and other metal AM platforms. Need a custom mounting pattern or proprietary format? We can manufacture to your drawing.
The SLM 280 Ti64 Build Plate is a precision-machined Ti-6Al-4V titanium platform for SLM 280 laser powder bed fusion (LPBF) systems. Its 240×278×73.66 mm (9.45×10.95×2.9 in) profile is stress-relieved and ground flat for repeatable first-layer adhesion, and it ships in two build speeds — Express in 2–3 weeks or Standard in 6–8 weeks — from our California shop. From $3,100.
Why production teams choose this plate
Spec-backed reasons to run a machined, inspected plate over raw stock or a worn platform.
Dedicated titanium platform
Keeping Ti-6Al-4V on a matched titanium plate avoids iron pickup into the melt pool and keeps material certification clean for reactive-metal builds.
Ground flat for consistent first layers
CNC-machined and precision-ground to a tight flatness tolerance so the first fused layer bonds evenly across the full platform — fewer recoater collisions, fewer failed builds.
Substantial profile, more regrind life
A thick starting plate leaves more material to face off and re-flatten after each build cycle before it is retired — more usable life than a thin, single-use plate.
Machined to SLM 280 spec
Each plate is CNC-machined to the SLM 280 clamping and recoater mounting pattern, so it drops into your machine without field-lapping.
How we get it to your build chamber
Every plate ships as a finished, inspected platform — not raw stock.
Machine to spec
Each plate is CNC-machined from certified Ti-6Al-4V titanium stock to the SLM 280 clamping and recoater pattern.
Stress-relieve & grind
Every plate is stress-relieved, then precision-ground to a flatness tolerance before it ships — no field-lapping required on install.
Inspect & ship
Flatness is checked on the finished plate. Choose your speed at checkout — Express in 2–3 weeks, or Standard in 6–8 weeks at lower cost.
Typical applications
Where production teams run this plate.
Specifications
Full dimensions and attributes for this plate.
| Material | Ti-6Al-4V (Grade 5) |
| Plate thickness | 2.9 in / 73.66 mm |
| Platform size | 9.45×10.95 in / 240×278 mm |
| Compatible systems | SLM 280 |
| Country of origin | USA |
| Lead time | 2–3 wks (Express) or 6–8 wks (Standard) |
Related build plates
Same machine in another alloy, or this alloy on another platform.
| Brand | Additive Plus |
| Country of origin | USA |
| Material | Ti-6Al-4V |
| Delivery speed | Express (2–3 weeks), Standard (6–8 weeks) |
| Package | 1 plate, 10 plates, 5 plates, 50 plates |
| Platform | SLM280 |
| Dimensions | 240×278×73.66 mm, 9.449×10.945×2.9 mm |
| Application | Dental, Engineering, Manufacturing, Medical |
We manufacture custom build plates.
Custom dimensions, mounting holes, threaded features, alignment pins, edge chamfers, engraved identification, or special surface requirements. Production-ready custom plates delivered in as little as 2–3 weeks.
Complete the workflow
Lightweight. High-purity. Biocompatible. Genuine Amaero Ti64 Grade 23 (ELI) titanium for LPBF, EBM & DED metal 3D printing.
- ✓ Extra-low-interstitial — higher ductility & fracture toughness
- ✓ Gas-atomized (EIGA), full COA + PSD report on every lot (15–53 µm, 10 kg)
- ✓ Sold in small, workable volumes · in US stock, ready to ship
A-Powder Ti-6Al-4V Grade 23 ELI — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.
- Lot certificate of analysis (COA)
Brand: A-Powder by AO Metal
Immersion-separation industrial vacuum for reactive metal powder — aluminium, titanium and similar alloys — in 3D printing and powder handling. Captures powder under liquid so it's never a dry, ignition-sensitive cloud. ATEX-rated, antistatic, single-phase.
- ✓ For reactive AM powder (Al, Ti, Mg) — the safe alternative to a dry vacuum
- ✓ Two-stage antistatic filtration + grounded construction · ATEX docs on request
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
Hose and tools are not part of the standard configuration. The Delfin KT1006 accessory kit ($721) fits this 2-inch inlet: 10 ft hose, wand, floor brush and nozzle.
The Farsoon FS350M is a multi-laser LPBF metal 3D printer for medium- to high-volume series production, supplied in 4×500 W, 4×1000 W or 6×500 W laser configurations on the same 17.1×14.1×15.7 in / 433×358×400 mm build cylinder.
- ✓ Three laser configurations — we supply and support all three
- ✓ 17.1×14.1×15.7 in / 433×358×400 mm build on a 65 sq ft / 6 m² class footprint
- ✓ Open platform — full access to process parameters, qualify your own alloy
- ✓ Lead time: built to order — confirmed at quote
Installation and commissioning in the USA: facility and gas planning, start-up and operator training by our US service team.
Other products teams run alongside SLM 280 Ti64 Build Plate | Titanium SLM 280 Build Platform
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.
- ✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
- ✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
xCast is a castable LSPc resin for investment casting — it prints tool-less, semi-hollow plastic patterns that drop into a foundry's existing dip-shell or flask-type process in place of wax.
- ✓ Flash-fired directly out of the ceramic mold — no autoclave dewax step
- ✓ Low ash content, clean burnout validated for titanium and aluminum alloys
- ✓ Runs on the Nexa3D NXE 400 (LSPc) · 5 kg · currently out of stock — contact us for lead time
Out of stock
· Currently out of stock — contact us for availability and lead time.
Zetasinter 4L is a tubular furnace for sintering printed metal parts under controlled atmosphere.
- ✔ Sinters under argon or argon and hydrogen — the atmosphere metal parts need
- ✔ Sized for prototyping and small production runs, not for a service bureau queue
- ✔ Runs on 220 V, 6 kW — no plant-level power supply required
Freight and installation requirements confirmed with you before the order is placed.
Made to order
· Ships from California · timeline confirmed at quotation
High-resolution dental model resin — beige, meth-acrylate based, formulated with BASF Forward AM. Built for dental models, removable dies and thermoformed appliance formers on the Nexa3D NXE 400 and NXD200, with curing profiles developed for 100 µm and 50 µm layer heights and room-temperature processing. Printed models wash in water only, with no finishing detergents required, then UV post-cure. Supplied in 5 kg bottles from US stock.
In stock
· 2 Business Days
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
Cost-effective ABS pellets qualified for large-format additive manufacturing (LFAM) — stiff, impact-tough parts and tooling at pellet cost, unreinforced or glass-fiber reinforced.
- ✓ Stiff and impact-tough — machines, sands, and paints cleanly for masters and tooling
- ✓ Ships dry with a lot datasheet + drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
- ✓ Ultra-thin layers & crisp XY resolution — fine-detail precision parts
- ✓ 37 MPa tensile · 1900 MPa modulus · 8% elongation — rigid yet not brittle
- ✓ Very low water uptake (0.3%) & strong chemical resistance
- ✓ Fast printing thanks to high reactivity
Made to order
· Ships in <10 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Why is the SLM 280 Ti64 Build Platform critical for certified titanium LPBF production?
How does a titanium build plate for SLM 280 improve thermal stability?
Is the SLM 280 build plate Ti64 a direct OEM replacement?
What industries benefit most from the SLM 280 titanium build platform?
Does the Ti-6Al-4V build plate for SLM 280 support medical-grade printing?
How does the precision-ground surface of the SLM 280 Ti64 Build Platform improve first layers?
Can custom thickness versions of the SLM 280 Ti64 Build Platform be manufactured?
How does the SLM 280 titanium build platform reduce part failure rates?
Place your order, or talk to an engineer first
Order SLM 280 Ti64 Build Plate | Titanium SLM 280 Build Platform direct, or talk to materials engineer