Nexa3D xFLEX402-Black Elastomer Resin for XiP – Rubber-Like Parts | 1 kg

Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.

• ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
• ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
• ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm

A-Powder 316L — AO Metal’s LPBF powder line, 15–53 µm, in 10 kg containers.

• Lot certificate of analysis (COA)

Brand: A-Powder by AO Metal

KS608A is a tough, heat- and moisture-resistant UV SLA resin for accurate, durable parts — ABS-like finish, low shrinkage and low yellowing, with a validated cure profile in every order. Supplied in a 10 kg (22 lb) container.

• ✓ Tough, ABS-like mechanicals — 25–30 MPa tensile, 58–70 J/m notched Izod, 12–20% elongation
• ✓ Heat & moisture resistant — HDT 58–68°C, Tg 55–70°C for warm functional testing
• ✓ Runs on any 405 nm SLA (desktop or large-format) with the included cure profile
• ✓ In US stock · ships from Los Angeles in 1–2 business days · datasheet included

Rigid black static-dissipative LSPc photopolymer: surface resistivity of about 10⁷ Ω to ASTM D257, with measured part surface resistance of 10⁶–10⁸ Ω from a dispersed discrete carbon-nanotube network. 5 kg bottle for Nexa3D NXE 400 and XiP.

• ✔ 10⁶–10⁸ Ω measured surface resistance — inside the 10⁶–10⁹ Ω static-dissipative band
• ✔ 68.1 MPa tensile, 97.4 MPa flexural, Shore D 87, HDT 91.3 °C at 0.45 MPa
• ✔ 5 kg bottle, Black — held in US stock, ships in 1–2 business days

Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.

• ✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
• ✓ Debind and sinter parameters plus the full datasheet included with every order
• ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Bring a composition the catalog doesn’t cover — we ultrasonically atomize your alloy into fine, spherical, low-oxygen metal powder at a target 20–120 µm PSD, characterize every batch, and ship it print-ready with the measured powder data.

• ✔ Reactive, refractory, intermetallic or high-entropy — from rod, wire, ingot or scrap
• ✔ Frequency-selected particle size for LPBF, DED, MIM or binder jetting
• ✔ Every batch characterized — measured PSD, chemistry, O₂ and flow shared with you
• ✔ NDA standard · feasibility check first · quoted per composition

Fast, general-purpose LSPc resin — the BASF Forward AM Ultracur3D ST 45 formulation — for tough, dimensionally stable models and functional prototypes at draft speeds above 15 cm/hr, in a clear Natural finish.

• ✓ 52 MPa tensile · 12% elongation · Shore D 85 · HDT 120 °C
• ✓ 1.5 kg bottle sized for the Nexa3D XiP (LSPc) — validated print profile included
• ✓ Ships in 1–2 business days from US stock