In stock
- Lot-matched xDENT341 resin with batch traceability for repeatable die models
- Validated NexaX dental profile for XiP, XiP Pro and NXD 200Pro
Nexa3D xDENT341-Beige Precision Die Model Resin – LSPc for XiP Pro and NXD | 5 kg
xDENT341-Beige is Nexa3D's precision model resin for LSPc printers, in a 5 kg bottle — 93% dimensional accuracy at 50 µm deviation, built for removable die models with the margins and contacts crown and bridge work depends on.
- ✓ 93% accuracy at 50 µm — against a dental-industry norm nearer 65%
- ✓ 5 kg pack keeps a month of die work on one traceable lot
- ✓ Shore 84 D keeps margins crisp · traditional beige reads like stone
- ✓ Genuine Nexa3D · XiP, XiP Pro, NXD 200Pro · ships in 1–2 business days
$417
What your dental lab actually checks
Accuracy measured at 50 µm, not 100
93% of measured points land within 50 µm deviation — Nexa3D cites a dental-industry norm closer to 65% at that tolerance. With Shore 84 D hardness and a 1860 MPa modulus, margins stay crisp through trimming and repeated try-in, and a 5 kg bottle keeps a month of cases on one traceable lot.
A materials engineer on the line
Indication fit, wash-and-cure tuning and margin troubleshooting from engineers who run LSPc daily. Sub-4h reply, NDA standard.
xDENT341-Beige is Nexa3D’s precision model resin for LSPc printers, supplied here in a 5 kg bottle. 93% dimensional accuracy at 50 µm deviation — against a dental-industry norm closer to 65% — for removable die models with the margins and contacts crown and bridge work depends on.
Why prosthodontic labs choose xDENT341
Precision where a fit either seats or comes back as a remake.
Accuracy where margins matter
93% of measured points fall within 50 µm deviation — well above the roughly 65% dental-industry accuracy norm Nexa3D cites for this tolerance.
Removable dies that seat right
Dimensional stability holds the die-to-model relationship, so dies drop in and return to the same position through repeated handling.
5 kg keeps the lab supplied
A bottle covers far more cases than a cartridge and keeps a whole month of die work on one traceable lot — fewer changeovers, lower cost per case.
Hard, stable surface
Shore 84 D hardness and a 1860 MPa modulus keep fine margin edges crisp during trimming, seating and repeated try-in.
How we supply xDENT341
Lot-matched resin, a validated dental profile and a repeatable finish.
Lot-matched supply
Bottles ship from US stock with batch traceability, so a validated die workflow reprints to the same margins.
Print on LSPc
Load the Nexa3D-validated xDENT341 profile in NexaX and print on XiP, XiP Pro or NXD 200Pro — no settings to develop.
Wash & cure
Two 2-minute washes in IPA or xClean, then UV post-cure. Full cure is what locks in the 50 µm accuracy figure.
Technical specifications
Post-cured properties from the Nexa3D xDENT341 datasheet. Values are typical, not guaranteed minimums.
| Property | Method | Value |
|---|---|---|
| Tensile strength | ASTM D638 | 41 MPa |
| Tensile modulus | ASTM D638 | 1860 MPa |
| Elongation at break | ASTM D638 | 2.7% |
| Surface hardness | ASTM D2240 | Shore 84 D |
| Dimensional accuracy | Nexa3D | 93% within 50 µm deviation |
| Color | — | Beige |
| Pack size | — | 5 kg bottle |
Compatibility & intended use
- Printers: Nexa3D XiP and XiP Pro LSPc systems and the NXD 200Pro dental platform, using the validated xDENT341 profile in NexaX.
- Intended use: dental models and removable dies used to fabricate crowns, bridges and implant restorations. It is a model resin and is not intended for direct patient contact or as a definitive restorative material.
- Post-processing: wash in IPA or xClean, then UV cure with a Nexa3D wash-and-cure station or equivalent.
Typical applications
Where 50 µm accuracy changes the remake rate.
Choosing between the xDENT resins
Match the resin to the indication and the accuracy you need.
Why source xDENT341 through Additive Plus
- Genuine Nexa3D dental material — the real xDENT341 formulation, not a relabeled substitute.
- US stock, fast dispatch — bottles ship in 1–2 business days; volume and PO orders handled directly.
- Validated NexaX dental profiles — print with the settings Nexa3D qualified for 50 µm model accuracy.
- Materials engineering on call — resin choice by indication, wash-and-cure tuning, margin troubleshooting. Sub-4h reply, NDA standard.
| Brand | Nexa3D |
| Color | Beige |
| Weight | 5kg |
| Platform | XiP, XIP PRO |
| Technology | LSPc, DLP, XiP |
| Printing Materials | Resins |
| Resin Type | Dental, General |
| Application | Dental, Engineering, Manufacturing, Medical |
Product videos
Send your scan We print the dieYou verify the fit
Send a representative prepped-arch scan and we'll print and post-process a removable die model in xDENT341 on our Nexa3D LSPc systems, so you can seat a coping and judge the margins yourself before changing your lab workflow.
Other products teams run alongside Nexa3D xDENT341-Beige Precision Die Model Resin – LSPc for XiP Pro and NXD | 5 kg
In stock
· Express 2–3 wks · Standard 6–8 wks
Crystal-clear resin for precision parts. Low viscosity = effortless flow & void-free prints.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
In stock
· Express 2–3 wks · Standard 6–8 wks
In stock
Print silicon carbide (SiC) ceramic parts on the 3DCeram M.A.T. print-debind-sinter workflow — ESA/ESTEC-tested for high-temperature, high-conductivity applications.
- ✓ ESA/ESTEC-verified: 423 MPa flexural strength, 82 W/m-K thermal conductivity
- ✓ Solid-state sintered to 2100°C — dense, chemically inert, no powder bed
- ✓ Qualified for the 3DCeram M.A.T. platform — quote-based pricing, request a quote
In stock
· Contact for lead time
The SLM 280 SS304 Build Platform is a precision-ground stainless steel build plate engineered for reliable LPBF production. Manufactured from high-grade 304 stainless steel and designed as a direct OEM-compatible solution, this SLM 280 metal build plate delivers excellent flatness, thermal stability, and repeatable first-layer performance for industrial additive manufacturing.
Need a custom steel build platform for another printer or alternative thickness? Request a custom quote — we manufacture precision stainless steel and specialty alloy build plates for most industrial LPBF systems.In stock
· Express 2–3 wks · Standard 6–8 wks
Flexible TPU 95A filament for FDM 3D printing — a Shore 95A semi-flexible elastomer with high elongation, abrasion resistance, and shock absorption, for seals, gaskets, dampers, and grips that need to bend without breaking.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers is xDENT341-Beige compatible with?
How accurate is xDENT341 for die models?
What is the difference between xDENT341-Beige and xDENT201-Gray?
How many die models does a 5 kg bottle produce?
Is xDENT341 biocompatible or cleared for patient contact?
What post-processing does xDENT341 need?
How should xDENT341 be stored and handled?
Place your order, or talk to an engineer first
Order Nexa3D xDENT341-Beige Precision Die Model Resin – LSPc for XiP Pro and NXD | 5 kg direct, or talk to materials engineer