Out of stock
Nexa3D Resin Bottle Spout for 1.5 L Container (XiP / XiP Pro) – OEM Spare | P/N 12053-03
OEM pour spout for the 1.5 L (1.5 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-03 (Rev A).
- ✓ Genuine Nexa3D spare · P/N 12053-03-RevA
- ✓ Fits the 1.5 L (1.5 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ Contact us for current availability and lead time
$105
Compatibility & Specifications
This is the genuine Nexa3D pour spout for the 1.5 L (1.5 kg) resin container used with the Nexa3D XiP and XiP Pro desktop resin 3D printers. The spout screws onto the resin bottle for clean, controlled pouring when filling the printer’s resin cartridge, helping reduce spills and waste. It is supplied to Nexa3D part number 12053-03 (revision A).
- Part number: 12053-03-RevA
- Type: Resin container pour spout
- Fits: 1.5 L (1.5 kg) Nexa3D resin container
- Compatibility: Nexa3D XiP and XiP Pro desktop resin 3D printers
- Brand: Nexa3D (OEM)
Why Source Through Additive Plus
Additive Plus supplies genuine Nexa3D accessories and supports the systems we sell. This 1.5 L spout is currently out of stock — contact us for availability and lead time. Ordering for a department or need a purchase order? Contact us.
| Brand | Nexa3D |
| Platform | XiP, XIP PRO |
Complete the workflow
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
Other products teams run alongside Nexa3D Resin Bottle Spout for 1.5 L Container (XiP / XiP Pro) – OEM Spare | P/N 12053-03
Genuine Sygnis UV module for the F-NIS 3D printer — 365 nm and 405 nm post-processor-controlled diodes that upgrade the machine from version A to version B.
- ✓ Dual-wavelength: 365 nm + 405 nm UV curing
- ✓ Post-processor-controlled diodes — self-installed A→B upgrade
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
QATM QPREP Solution Boxes bundle every grinding and polishing consumable needed to prepare a specific material for metallographic analysis — an evaluated step-by-step preparation guide plus grinding disc, grinding paper, diamond suspension and polishing cloth in one box.
- ✓ Complete, evaluated prep recipe for one material — guide + all media
- ✓ 11 material-specific boxes · media for Ø250 mm and Ø300 mm systems
- ✓ Ideal for unknown specimens and labs new to preparation
In stock
· Contact for lead time
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Genuine Nexa3D accessory package for the Nexa3D XiP Pro industrial resin 3D printer. Sourced from a US-based Nexa3D partner — confirm the current pack contents before ordering.
- ✓ Bundle of genuine Nexa3D XiP Pro accessories
- ✓ Contents can vary by revision — we confirm the pack list for your unit
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.
- ✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
- ✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
- ✓ Feeds filament straight into the printer while sealed
Made to order
· Currently on backorder — contact us for lead time
Eight-colour glaze kit for finishing parts printed in Zetamix Porcelain filament.
- ✔ Eight colours in one kit
- ✔ Made for parts printed and fired in Zetamix Porcelain
- ✔ Genuine Zetamix by Nanoe
In stock
· Ships from California · 10–20 business days
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Direct Pellet Extrusion (DPE) head for the 3DCeram M.A.T. — print ceramic & metal pellets at lower feedstock cost than filament.
- ✓ Screw Ø8 mm · 270 °C max · 0.8 mm nozzle
- ✓ Lower cost per part vs. filament, higher throughput
- ✓ Installs on your M.A.T. — US support & training
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which resin container does this spout fit?
What is the spout for?
Is this spout in stock?
Place your order, or talk to an engineer first
Order Nexa3D Resin Bottle Spout for 1.5 L Container (XiP / XiP Pro) – OEM Spare | P/N 12053-03 direct, or talk to materials engineer