In stock
M.A.T. — Pellet (DPE) Extrusion Head
Direct Pellet Extrusion (DPE) head for the 3DCeram M.A.T. — print ceramic & metal pellets at lower feedstock cost than filament.
- ✓ Screw Ø8 mm · 270 °C max · 0.8 mm nozzle
- ✓ Lower cost per part vs. filament, higher throughput
- ✓ Installs on your M.A.T. — US support & training
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
$12,900
Print ceramic & metal pellets — at a fraction of filament cost per part.
The Direct Pellet Extrusion (DPE) head feeds granulated ceramic or metal feedstock straight into the M.A.T., cutting material cost and raising deposition rate versus 1.75 mm filament — ideal once you move from prototypes to repeat runs.
Specifications
| Technology | Direct Pellet Extrusion (DPE) |
| Feedstock | Ceramic & metal pellets / granulate (1–4 mm) |
| Screw diameter | Ø8 mm |
| Max. nozzle temperature | 270 °C |
| Standard nozzle | 0.8 mm |
| Compatible with | 3DCeram M.A.T. (FFF/DPE architecture) |
| Part number | C0030030 |
What it’s for
Teams scaling from prototype to production who want lower cost per part and higher throughput on ceramic and metal feedstock, without switching machines.
How you buy
- Made to order with your M.A.T. — installed & commissioned by Additive Plus
- US service, spares & technical support — official 3DCeram US representative
- Leasing & installment available · mutual NDA before any file review
Other products teams run alongside M.A.T. — Pellet (DPE) Extrusion Head
Replacement resin nozzle filters for the Nexa3D NXD, supplied as a 5-pack. They strain the resin as it moves through the automated delivery nozzles, catching debris before it reaches the vat. A cheap consumable that protects print quality.
- ✓ Nozzle filters for the NXD automated resin delivery, 5-pack
- ✓ Genuine Nexa3D consumable (P/N 11377)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Eight-colour glaze kit for finishing parts printed in Zetamix Porcelain filament.
- ✔ Eight colours in one kit
- ✔ Made for parts printed and fired in Zetamix Porcelain
- ✔ Genuine Zetamix by Nanoe
In stock
· Ships from California · 10–20 business days
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement 9.3-inch 4K monochrome LCD for the Nexa3D XiP — the masking screen that projects each layer through the light engine. A worn or failing LCD shows up as dim areas, stuck pixels or incomplete cures; this drop-in module restores full-resolution printing.
- ✓ 9.3″ 4K monochrome masking LCD
- ✓ Direct replacement for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.
- Heated 10 ml cartridge head, up to 60 °C
- Upgrades F-NIS Version B to Version C — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Genuine Nexa3D replacement resin vat container for the XiP desktop resin 3D printer — the rigid outer tray that holds the Everlast membrane and resin during printing. In stock at our US facility, ships in 2 business days.
- ✓ Outer vat container / tray for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part — pairs with the XiP Everlast membrane
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facilityWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Place your order, or talk to an engineer first
Order M.A.T. — Pellet (DPE) Extrusion Head direct, or talk to materials engineer