In stock
Nexa3D Material Changeover Kit for NXD – P/N 11276
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 5–15 business days
Switching resins on an automated system is only clean if you change the parts that touch the material. This kit supplies the consumables the NXD needs for a proper material changeover, so traces of the previous resin do not carry into the next one and each material keeps performing to spec.
Compatibility & Specifications
- Type: material changeover consumable kit
- Function: clean switch between resins on the automated resin system
- Compatible machine: Nexa3D NXD
- Part number: 11276 (genuine Nexa3D kit)
- Use: one kit per material changeover
Why Source Through Additive Plus
Genuine Nexa3D consumables, shipped in 5–15 business days. If you run several materials, keeping a few kits on hand means a resin switch never waits on a parts order. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NXD, NXE |
Other products teams run alongside Nexa3D Material Changeover Kit for NXD – P/N 11276
Replacement activated-carbon cartridge for the Nexa3D XiP AiR air-filtration accessory. It captures resin odour and VOCs from the XiP’s exhaust, so a saturated cartridge should be swapped to keep the AiR unit filtering effectively.
- ✓ Activated-carbon odour / VOC capture cartridge
- ✓ Fits the Nexa3D XiP AiR filtration unit
- ✓ Genuine Nexa3D consumable · ships in 5–15 business days
In stock
· 5–15 Business Days
Disposable 190-micron mesh filters for straining resin as you pour it into or out of a Nexa3D vat — they catch cured flakes and debris before they reach the print. 50 filters per pack.
- ✓ 190-micron fine filtration — protects the vat membrane and your prints
- ✓ Fits Nexa3D NXE 400 / NXE 400 Pro (NX Pro) and NXD resin workflows
- ✓ 50-pack · genuine Nexa3D consumable · ships in 5–15 business days
In stock
· 5–15 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships in 5–15 business days
Three on hand means a fresh membrane is always one swap away.
In stock
· 5–15 Business Days
Antistatic starter kit for Delfin vacuums with a 2-inch (50 mm) inlet: hose, wand, floor brush, nozzle and connectors in one box, so the vacuum is ready to clean on day one.
- ✓ Fits the Mistral 300 BL D2 and the Mistral 451 BL Inert
- ✓ 10 ft hose · double bend wand · 16.9 in floor brush · cone nozzle · connectors
- ✓ Genuine Delfin kit · ship date confirmed by email after you order
In stock
· Ship date confirmed by email
Single heating resistance for the Zetasinter chamber furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Replacement activated-carbon air filters for the Nexa3D XiP. They capture resin odour and VOCs from the printer’s internal airflow, keeping the chamber and your workspace cleaner. Swap them on a schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Fits the internal air handling of the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D consumable · ships in 5–15 business days
In stock
· 5–15 Business Days
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 5–15 business days
In stock
· 5–15 Business Days
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
Made to order
· Made to order — typically ships in 1–2 weeksWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which machine is this changeover kit for?
Why use a dedicated changeover kit?
When do I need one?
Place your order, or talk to an engineer first
Order Nexa3D Material Changeover Kit for NXD – P/N 11276 direct, or talk to materials engineer