Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
Consumables, Other Accessories and Spare Parts
Nexa3D Slotted Chamfer Build Plate Assembly for NX Pro / NXD – P/N 12389
Slotted, chamfered replacement build plate assembly for the Nexa3D NX Pro and NXD (NXE 400 series). The slots ease resin drainage and peel forces; the chamfer aids part release. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted chamfer platform — drainage and easier release
- ✓ Fits Nexa3D NX Pro / NXD (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12389) · ships in 2 business days
$1,372
Price held 7 days after order.
About this product
On the NX Pro and NXD, the build plate is where every job begins — and a flat, clean platform is the foundation of reliable adhesion. This slotted, chamfered assembly drains resin and eases peel forces while helping parts release, so tall and large builds run more predictably. When a plate tires out, a fresh one restores dependable first layers.
Compatibility & Specifications
- Type: slotted chamfer build plate assembly
- Benefit: resin drainage, reduced peel force, easier part release
- Compatible systems: Nexa3D NX Pro and NXD (NXE 400 series)
- Part number: 12389 (genuine Nexa3D assembly)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Not sure whether the slotted or solid plate suits your parts? Ask our engineers — they run these machines. Sub-24-hour response. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NXD, NXE |
Other products teams run alongside Nexa3D Slotted Chamfer Build Plate Assembly for NX Pro / NXD – P/N 12389
Accessories
Nexa3D Resin Bottle Spout for 1 L Container (XiP / XiP Pro) – OEM Spare | P/N 12053-02
OEM pour spout for the 1 L (1 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-02 (Rev B).
- ✓ Genuine Nexa3D spare · P/N 12053-02-RevB
- ✓ Fits the 1 L (1 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ In US stock · ships in 2 business days
From $6
Add to cart
In stock
· 2 Business Days
Accessories
Nexa3D Tool Kit for NX Pro / NXD / NXE – P/N 11083
Replacement tool kit for the Nexa3D NX Pro, NXD and NXE printers — the hand tools Nexa3D supplies for operating and maintaining the machine, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D hand-tool set for NX Pro / NXD / NXE
- ✓ For part removal and routine maintenance
- ✓ Genuine Nexa3D kit (P/N 11083) · ships in 2 business days
From $284
Add to cart
In stock
· 2 Business Days
Accessories
Sygnis F-NIS Heat Module – Heated Cartridge Head (up to 60 °C) | B-to-C Upgrade
Heated cartridge-head module for the Sygnis F-NIS 3D printer — warms the 10 ml cartridge to 60 °C and upgrades the machine from version B to version C.
- ✓ Heats the 10 ml cartridge up to 60 °C for temperature-sensitive materials
- ✓ Self-install upgrade from F-NIS version B to version C
- ✓ Genuine Sygnis part — supported by the F-NIS team
In stock
· 2 Business Days
Accessories
M.A.T. — Pellet (DPE) Extrusion Head
Direct Pellet Extrusion (DPE) head for the 3DCeram M.A.T. — print ceramic & metal pellets at lower feedstock cost than filament.
- ✓ Screw Ø8 mm · 270 °C max · 0.8 mm nozzle
- ✓ Lower cost per part vs. filament, higher throughput
- ✓ Installs on your M.A.T. — US support & training
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
From $12900
Add to cart
In stock
Consumables
Nexa3D Everlast-2 Membrane for XiP
The genuine Nexa3D Everlast-2 membrane keeps your XiP producing clean, consistent parts — print after print.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — second-generation interface for sharp feature definition
- ✔ Ships from our Los Angeles warehouse in 5–15 business days · free U.S. shipping over $200
Order a spare today — a worn membrane shouldn't cost you a print day.
From $149
Add to cart
In stock
· 5–15 Business Days
Other Accessories and Spare Parts · FFF
UltiMaker PVA Removal Station – Dissolve PVA Supports up to 4× Faster
Automated support-removal station that dissolves PVA up to 4× faster than motionless water — magnetic rotor circulation, an illuminated tank, and a lift-out rinsing basket for hands-off post-processing.
- ✓ Up to 4× faster PVA removal — cuts operator time up to 80%
- ✓ 200 × 230 × 165 mm basket · 13.7 L illuminated tank with saturation indicator
- ✓ Genuine UltiMaker hardware — made to order, typical lead time 1–2 weeks
From $1095
Add to cart
On backorder
· Made to order — typical lead time 1–2 weeks (confirmed at checkout)
Accessories
M.A.T. — Dual-Head Frame Reinforcement
Dual-head frame reinforcement for the 3DCeram M.A.T. — mount two FFF or two DPE heads for bi-material printing.
- ✓ Two heads mounted simultaneously
- ✓ Bi-material printing in a single build
- ✓ Specified & fitted by Additive Plus
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
From $3400
Add to cart
In stock
Other Accessories and Spare Parts · DIW
Sygnis Syringe Barrel Piston for F-NIS DIW Dispensing – Wiper Seal | Pack of 20
General-purpose white piston for Sygnis F-NIS syringe barrels — its tapered face spreads pneumatic pressure evenly across the paste for consistent dispensing, while an integrated wiper keeps the barrel wall clean and prevents drips and material loss.
- ✓ Tapered face — even pressure, no air entrapment
- ✓ Built-in wiper · $44.00 per pack of 20
- ✓ In US stock · order by request — use the quote button
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which machines is this build plate for?
This slotted chamfer build plate assembly (P/N 12389) fits the Nexa3D NX Pro and NXD systems in the NXE 400 series. Confirm your light-engine / platform generation against the part number if you are unsure.
What does the slotted chamfer design do?
The slots let resin drain and reduce the suction / peel force on each layer, while the chamfered edge helps parts release cleanly. It is a genuine Nexa3D assembly machined to the printer's tolerance.
When should the build plate be replaced?
Replace it when deeply gouged, warped or no longer holding parts reliably after re-leveling. A tired plate is a common cause of prints letting go mid-build, so keeping a spare limits downtime on a busy machine.
Place your order, or talk to an engineer first
Order Nexa3D Slotted Chamfer Build Plate Assembly for NX Pro / NXD – P/N 12389 direct, or talk to materials engineer