SLA Ceramic Materials for 3D Printing

SLA Ceramic

Ceramic resins for SLA/DLP ceramic 3D printing — photocurable formulations loaded with alumina, zirconia, or other technical ceramics for high-detail green parts that sinter to dense components. Suited to applications that demand thermal stability, wear resistance, and precision geometry.

10 products From $1,650

Showing 1–8 of 10 SLA Ceramic

3DCeram · CERAMIC SLA

Alumina 3D Printing Paste

Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.

✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
✓ Debind and sinter parameters plus the full datasheet included with every order
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Alumina (Al2O3)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Aluminium Nitride 3D Printing Paste

Print aluminium nitride (AlN) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a ceramic that conducts heat yet insulates electrically.

✓ 163 W/m·K thermal conductivity with electrical insulation — power-electronics substrates
✓ Print conformal cooling and channelled geometries not possible by pressing
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Aluminium Nitride (AlN)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Cordierite 3D Printing Paste

Print near-zero-expansion cordierite parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dimensionally stable oxide ceramic.

✓ Coefficient of thermal expansion near zero — dimensional stability through thermal cycling
✓ Aerospace optics, metrology and vacuum hardware; >98% dense after sintering
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Cordierite

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Fused Silica 3D Printing Paste

Print leachable fused-silica investment-casting cores on 3DCeram's Ceramaker laser-SLA platform for complex internal casting geometries.

✓ 40% porosity, excellent leachability — cleanly removed after casting
✓ Very low expansion (0.07% max dilatation to 1500 °C) holds core dimension through the pour
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Fused Silica (SiO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Hydroxyapatite 3D Printing Paste

Print bioactive hydroxyapatite bone-substitute parts on the 3DCeram Ceramaker & M.A.T. ceramic-SLA platforms, then debind and sinter to a clean calcium-phosphate bioceramic.

✓ Bioactive calcium phosphate — composition close to bone, crystallinity >95%, heavy metals <30 ppm
✓ Print porous, patient-specific implant geometries not possible by machining
✓ 55 vol% ceramic load · 405 nm photoinitiator · 250 mL bottle

Prints Hydroxyapatite (HA)

From $1,650

Add to cart

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Silicon Nitride 3D Printing Paste

Print silicon nitride (Si₃N₄) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to one of the hardest, most thermal-shock-resistant ceramics.

✓ 881 MPa 4-point bending strength at >97% density, 11 Weibull modulus
✓ Thermal-shock resistant with low wettability against molten metal
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Silicon Nitride (Si3N4)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Silicore 3D Printing Paste

Print robust, leachable Silicore foundry cores on 3DCeram's Ceramaker laser-SLA platform for complex, demanding castings.

✓ Higher-strength silica core formulation — survives handling and assembly
✓ Good leachability and low shrinkage (0.20% max to 1500 °C); all alloys except cobalt
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Fused Silica (SiO2)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

3DCeram · CERAMIC SLA

Tricalcium Phosphate 3D Printing Paste

Print bioresorbable tricalcium phosphate (TCP) scaffolds on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a clean, resorbable bioceramic.

✓ Bioresorbable — gradually replaced by natural bone; Ca/P ratio 1.503, no calcium pyrophosphate
✓ Print porous, patient-specific scaffolds for bone regeneration and spinal implants
✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review

Prints Tricalcium Phosphate (TCP)

Get quote

In stock

· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.

SLA Ceramic

Not sure which material? We'll match it to your printer in 20 min.

Browse other material types

Have a CAD? Have a quote in 24h.