Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
With every system
- Install, operator training, and validated molding parameters
- Tailored warranty with same-week dispatch on critical issues
Accessories APSX, Other Equipment, Plastic Injection Molding Machine
MOLD INSULATOR (PEEK)
Thin insulator for the APSX-PIM molds.
$50
Price held 7 days after order.
Install + training included
Tailored service plan
Built for production teams
What your process engineer actually checks
From printed prototype to molded part
We use injection molding to bridge our own printed prototypes into short runs, so install includes validated parameters for your resin and tooling guidance. The team that trains you actually molds parts — not a distributor reading a manual.
An applications engineer on the line
Questions on tooling, shot size, cycle times, or pellet selection? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
About this product
A 3.5 inch by 3.5 inch PEEK insulator with 1/16 inch thickness for the APSX-PIM molds.
It will be placed behind the mold and in front of the bronze nozzle plate by aligning the nozzle hole. It helps to stabilize the mold temperature. Spray glue or double sided tape (ShurTape) can be used as a temporary solution before mounting the mold on the machine.
As a permanent mounting, one can recessed bolt on the mold A side.
| Brand | APSX |
| Country of origin | USA |
| Platform | FIM |
Need tooling or a specific resin?
We mold our own. Tooling and trials on request.
Need a mold built, an insert cut, or a trial run before committing? We can produce tooling and run sample shots on the actual machine so you see molded parts first. Typical tooling lead 2–4 weeks.
Other products teams run alongside MOLD INSULATOR (PEEK)
Media blasting · Surface finishing
AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts
Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.
- ✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
- ✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
- ✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California
From $20560
Add to cart
On backorder
· 4-6 weeks
ORYX WashStation · Support removal
Oryx SCAWaterjet Support Removal Spray Booth — Pressurized Waterjet | 5 gal
Enclosed pressurized-waterjet spray booth for fast, targeted support-material removal on 3D-printed parts — manual dual-pressure wands, no heat and no detergent, cleaning in minutes.
- ✓ Dual-pressure waterjet wands up to 1700 psi — bulk and fine detail
- ✓ No heat, no detergent, no plumbing required — mobile or direct-plumb
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
In stock
· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, setup guidance included.
Accessories APSX
Dryer Oven
General purpose oven for heating the plastic pellets up to 437° F.
From $900
Add to cart
In stock
Depowdering stations · Cleaning, Surface finishing
AM Solutions S1 — Automated Depowdering & Surface Finishing System
Automated 2-in-1 blasting cell that depowders and surface-finishes powder-bed 3D-printed parts in one enclosed, software-controlled cycle.
- ✓ Depowdering + surface finishing in one ATEX-compliant cell
- ✓ Polymer PBF (SLS, MJF, HSS, SAF) + de-powdered metal parts
- ✓ Lead time: 6–9 weeks — built to order · install + training included
From $69920
Add to cart
On backorder
· Lead time: 6–9 weeks — built to order. Install and operator training included.
ORYX WashStation · Support removal
Oryx SCA3600 Industrial Support Removal Station — Heated Soluble-Support Bath | 102 L
Industrial, high-throughput station that removes dissolvable support material from large or many FDM and PolyJet 3D-printed parts in a heated, agitated water-detergent bath — no IPA, no hand-picking.
- ✓ 102 L heated tank · 16×16×14 in basket · No-Heat mode for PolyJet
- ✓ Automated soluble-support removal for FDM & PolyJet, on a rolling cart
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
In stock
· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, install guidance included.
Plastic Injection Molding Machine
Polypropylene (PP) Yellow Pellets - 2 lbs
Versatile, Impact-Resistant Copolymer for Custom Applications
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $85
Add to cart
In stock
Bundle 3D Printers · LSPc, SLA, XiP
Nexa3D Freeform Injection Molding (FIM) Desktop Package — Dissolvable-Mold Tooling on the XiP
A desktop package to run Freeform Injection Molding: print a dissolvable mold in xMOLD resin on the Nexa3D XiP, inject real production material into it, then dissolve the mold away — end-use parts from a printed tool, at a fraction of hard-tooling cost.
- ✓ Print the mold, mold the part, dissolve the mold — ~2 days CAD-to-part
- ✓ Inject thermoplastics, TPE, LSR silicone, MIM metal, CIM ceramic
- ✓ Package: XiP printer + xMOLD resin + xWASH FiM · priced by configuration
In stock
· Configured and quoted to your setup (incl. injection press). Install and training included; lead time confirmed at quote.
Plastic Injection Molding Machine
Polypropylene (PP) Blue Pellets - 2 lbs
Versatile, Impact-Resistant Copolymer for Custom Applications
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $85
Add to cart
In stock
From production teams running MOLD INSULATOR (PEEK)
Unedited feedback from teams who bought and run MOLD INSULATOR (PEEK).
★★★★★
We bridged a 3D-printed prototype to a 500-part run on the bench machine. Cycle times were exactly as quoted.
MK
Marcus K.
Process Engineer · Consumer Products
★★★★★
Asked about tooling for a small insert. An engineer walked us through it and ran a trial shot, no sales pitch.
PS
Priya S.
R&D Lead · Medical Devices
★★★★★
Install included validated parameters for our resin. First parts were in spec — minimal trial-and-error.
DR
Diego R.
Production Lead · Automotive
Place your order, or talk to an engineer first
Order MOLD INSULATOR (PEEK) direct, or talk to materials engineer