Mutual NDA standard before any file review. Talk to an engineer →

In stock

 Nexa3D (SAREMCO) CROWNTEC A2 Permanent Dental Composite Resin – LSPc/DLP | 0.5 kg
What you get
  • 0.5 kg bottle of saremco print CROWNTEC A2, ready to use — no pre-mixing
  • IFU, SDS and the validated LSPc profile matched to your printer and curing unit on request
Materials, DLP 3D Printing Materials, Engineering, Manufacturing, Resin 3D Printing Materials, SLA 3D Printing Materials · LSPc, DLP, SLA

Nexa3D (SAREMCO) CROWNTEC A2 Permanent Dental Composite Resin – LSPc/DLP | 0.5 kg

Light-curing filled composite for permanent crowns, inlays, onlays, veneers and denture teeth — shade A2, validated on Nexa3D LSPc.

  • ✓ Permanent indication: flexural strength > 130 MPa (ISO 4049), E-modulus > 4000 MPa
  • ✓ One-phase esthetics — pre-matched A2 opacity, no layering; biocompatible after UV post-cure
  • ✓ 0.5 kg ready-to-use bottle, zero pre-mixing · ships in 1–2 business days

$695

Prices follow supplier cost and stock availability and are updated regularly. The price you see is today's price — once you order, it's held for 7 days.
NDA standard Ships in 1–2 business days
> 130 MPa Flexural strength, ISO 4049
> 4000 MPa E-modulus
Class IIa CE-marked medical device
0.5 kg Ready-to-use bottle

What your dental technician actually checks

Permanent, not just temporary

CROWNTEC is indicated for permanent crowns, inlays, onlays, veneers and artificial denture teeth — not temporary work only. Flexural strength above 130 MPa to DIN EN ISO 4049 and an E-modulus above 4000 MPa are what let it carry a definitive single-tooth restoration.

Post-cure decides the outcome

An IPA wash plus a full UV post-cure at 365/385/405 nm is mandatory. That step is what delivers both the rated mechanical properties and the biocompatible, low-residual-monomer surface. We hand you the validated cure settings for your unit so the result is repeatable.

A materials engineer on the line

Shade selection, print orientation, cure times, polishing protocol — ask the people who run these resins. Sub-4h reply, NDA standard.

About this product

SAREMCO print CROWNTEC A2 is a light-curing, filled composite resin for permanent single-tooth restorations — crowns, inlays, onlays, veneers and artificial denture teeth. Made by SAREMCO Dental AG (Switzerland) and validated by Nexa3D for its LSPc resin printers, it prints a high-esthetic A2 shade in one phase and post-cures to a biocompatible, >130 MPa restoration.

SAREMCO print CROWNTEC A2 dental composite resin 0.5 kg bottle for Nexa3D LSPc printers
saremco print CROWNTEC — 0.5 kg bottle, shade A2. Ready-to-use, no pre-mixing.

Why dental labs choose CROWNTEC

A permanent-indication composite that prints, cures and polishes like a restorative — not a model resin.

Permanent-grade strength

Flexural strength >130 MPa (ISO 4049), E-modulus >4000 MPa. Indicated for permanent crowns, inlays, onlays and veneers — not just temporaries.

One-phase esthetics

A single, pre-matched A2 shade with balanced opacity — no layering, no staining step required for a natural result.

Biocompatible when post-cured

CE-marked Class IIa device. After correct UV post-cure the manufacturer reports no elutable substances in an aqueous environment.

Ready to use

Zero pre-mixing. Shake, pour into the vat and print. Depth of cure ≥1.5 mm; 2-year shelf life stored per the IFU.

The CROWNTEC workflow on Nexa3D LSPc

Three steps from bottle to seated restoration. Final UV post-cure is mandatory — it is what makes the part both strong and biocompatible.

Step 01
Print

Run CROWNTEC on the validated Nexa3D LSPc profile (50 or 100 µm layers) on XiP-family printers. Nest crowns, inlays, onlays and veneers on one plate.

Step 02
Wash

Remove uncured resin in isopropanol (IPA). Keep to the IFU wash time so fine margins and occlusal detail are preserved.

Step 03
UV post-cure

Final-polymerize under UV (365/385/405 nm, e.g. Nexa3D xCURE). This unlocks full mechanical properties and the biocompatible, low-residual-monomer surface.

Material properties

Property Value Standard / note
Material type Filled composite (methacrylate) Light-curing, one-phase
Shade A2 (VITA classical), REF 8052 Also stocked: SW, B1, A1, A3
Flexural strength > 130 MPa DIN EN ISO 4049
E-modulus (flexural) > 4000 MPa DIN EN ISO 4049
Depth of cure ≥ 1.5 mm Per shade
Hardness Barcol > 40 Post-cured
Density 1.4 g/cm³ SDS D300135
Shelf life 2 years Stored per IFU

Values from the SAREMCO product data / IFU for the finished, correctly post-cured restoration.

SAREMCO CROWNTEC VITA shade range SW B1 A1 A2 A3 permanent dental resin
CROWNTEC shade family. A2 shown on this page; B1, A1, A3 and SW are stocked, with A4/B2/C3/C4/D3 on request.

Indications

Cleared for permanent single-tooth restorations; also covers temporary work.

Permanent crowns
Single-tooth, full-contour
Inlays & onlays
Indirect, adhesively bonded
Veneers
High-esthetic anterior
Artificial denture teeth
Strong, wear-resistant
Temporary bridges & crowns
Also indicated for temporaries
Chairside & lab
Validated across DLP/mSLA

Need a different shade or the printer to run it?

CROWNTEC is stocked in multiple shades, and it is a validated open material on the Nexa3D LSPc platform.

Different shadeCROWNTEC B1Brighter B1 shade, same 0.5 kg bottle and permanent indication.View shade →
PrinterNexa3D XiP ProHigh-throughput LSPc system that runs CROWNTEC and other open resins.View printer →
Try firstLSPc Resin Sample KitPrinted material samples to evaluate the LSPc workflow before committing.View kit →
Tell us your printer, curing unit and target indication — a materials engineer will confirm the validated CROWNTEC profile and post-cure settings for your lab. Sub-4h reply, NDA standard.

Why source CROWNTEC through Additive Plus

  • Genuine SAREMCO print CROWNTEC, distributed and validated by Nexa3D — not a relabeled substitute.
  • Materials engineers who run LSPc resins in-house and can hand you the validated print + post-cure profile.
  • US inventory with fast dispatch; volume and purchase-order pricing on request.
  • Full workflow under one roof: resin, Nexa3D printer, post-cure and spares.
Brand Nexa3D
Weight 0.5 kg
Country of origin Switzerland
Printing Materials Resins
Platform XiP
Technology LSPc, DLP, SLA
Resin Type Dental
Application Engineering, Manufacturing

Product videos

Check the shade before you stock it

Send us the indication and target shade. We will print a CROWNTEC test restoration on the validated LSPc profile so you can judge fit, opacity and polish on the bench before you order bottles for the whole lab.

Other products teams run alongside Nexa3D (SAREMCO) CROWNTEC A2 Permanent Dental Composite Resin – LSPc/DLP | 0.5 kg

Nexa3D xCERAMIC3280 Ceramic-Filled Resin – Rigid, High-HDT Parts | 5 L
DLP 3D Printing Materials · LSPc, DLP, XiP
Nexa3D xCERAMIC3280 Ceramic-Filled Resin – Rigid, High-HDT Parts | 5 L

xCERAMIC3280 is a white ceramic-composite resin from Nexa3D and BASF — rigid, high heat-deflection, with a true ceramic look and feel.

  • ✓ High rigidity and heat-deflection temperature for wind-tunnel models, housings, and enclosures
  • ✓ Low viscosity means fast prints with fine detail and strong mechanical properties
  • ✓ Genuine Nexa3D / BASF resin for NXE-series printers · 5 L · ships from US stock in 2 business days
From $1325
Add to cart

In stock

· 2 Business Days
Caracol TPE Pellets – Flexible Feedstock for Large-Format 3D Printing
Composite Tooling · FFF, LFAM
Caracol TPE Pellets – Flexible Feedstock for Large-Format 3D Printing

Flexible TPE pellets qualified for large-format additive manufacturing (LFAM) — rubber-like elasticity and a range of Shore-hardness grades for big seals, gaskets, and grips at pellet cost.

  • ✓ Rubber-like flexibility with vibration and impact damping — soft to semi-rigid grades
  • ✓ Ships dry with a lot datasheet + drying, flow, and retraction parameters
  • ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
Prints TPE
Get quote

In stock

· 1–2 Business Days
Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg
DLP 3D Printing Materials · LSPc, DLP, XiP
Nexa3D xFLEX475-Black Soft Elastomer Resin for XiP | 1.5 kg

Currently not in stock. Leave a request and we will confirm availability, price and lead time.

xFLEX475-Black is a medium-soft, rubber-like elastomer — 150% elongation at failure, up to 50% energy return, solvent-resistant.

  • ✓ Resilient with snap-back and tear resistance — pipes and manifolds, handles, seals, gaskets, midsoles
  • ✓ 150% elongation at failure, up to 50% energy return, resistant to most solvents
  • ✓ Genuine Nexa3D resin for the XiP · 1.5 kg cartridge · not in stock, available on request
From $415
Get quote

Out of stock

· Not in stock — available on request
ALTANA Cubic Ink Tough 2100 VP – Fast Functional Resin, Impact-Resistant & Tough (DLP/LCD/mSLA)
DLP 3D Printing Materials
ALTANA Cubic Ink Tough 2100 VP – Fast Functional Resin, Impact-Resistant & Tough (DLP/LCD/mSLA)

Fast, easy-to-print functional resin with a strong balance of toughness, impact resistance and HDT — robust enough for drilling, grinding and real functional parts.

  • ✓ High impact resistance — 36 J/m notched Izod, 12% elongation, 380 J/m unnotched
  • ✓ 73 MPa tensile · 2800 MPa modulus · 84 Shore D — stiff yet not brittle
  • ✓ Post-machinable (drill, grind); uncolored, black & custom colors
  • ✓ A cost-effective alternative to Loctite IND403 HDT80
From $199
Get quote

Made to order

· Ships in <10 business days
Nexa3D x45 Natural Resin 5kg
DLP 3D Printing Materials · LSPc
Nexa3D x45 Natural Resin 5kg

Fast, general-purpose LSPc resin — the BASF Forward AM Ultracur3D ST 45 formulation — for tough, dimensionally stable models and functional prototypes at draft speeds above 15 cm/hr, in a clear Natural finish.

  • ✓ 52 MPa tensile · 12% elongation · Shore D 85 · HDT 120 °C
  • ✓ Runs on Nexa3D NXE 400/400Pro and XiP (LSPc) — validated profile included
  • ✓ Ships in 1–2 business days from US stock · 1.5 kg & 5 kg
From $652
Add to cart

In stock

· Ships in 1–2 business days from US stock.
Polypropylene (PP) Black Pellets SG702 - 2 lbs
Engineering · PIM (Plastic Injection Molding)
Polypropylene (PP) Black Pellets SG702 - 2 lbs
High Flow, High Impact Copolymer. Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
Prints PP (Polypropylene)
From $50
Add to cart

In stock

· 1–2 Business Days
Nexa3D xPEEK147 resin 5kg-NA
DLP 3D Printing Materials · LSPc, DLP, XiP
Nexa3D xPEEK147 resin 5kg-NA

xPEEK147 is a high-temperature LSPc photopolymer in the performance range of PEEK — very high stiffness, 80 MPa tensile strength and heat deflection up to 230°C after a thermal post-cure.

  • ✓ Heat deflection up to 230°C (0.45 MPa) after the 170°C bake
  • ✓ PEEK-range stiffness — 3220 MPa modulus, Shore D 94
  • ✓ 5 kg container for NXE 400 / 400Pro (405 nm LSPc)
  • ✓ In stock — ships in 1–2 business days from US inventory
From $1660
Add to cart

In stock

· In stock — ships in 1–2 business days from US inventory.
CNPC 18Ni300 Maraging Steel Powder for Metal 3D Printing | 15–53 µm LPBF – 10 kg / 22 lbs
Iron Base · Metal LPBF
CNPC 18Ni300 Maraging Steel Powder for Metal 3D Printing | 15–53 µm LPBF – 10 kg / 22 lbs

CNPC 18Ni300 Maraging Steel powder for LPBF — made by CNPC Powder, 15–53 µm, sold in 10 kg containers.

  • Certificate of analysis (COA) for the lot, on request

Manufacturer: CNPC Powder

Prints 18Ni300
From $590
Get quote

Made to order

· Ship date confirmed after you order
1 / 1

Common questions

Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.

Is CROWNTEC A2 indicated for permanent restorations or only temporaries?
saremco print CROWNTEC A2 is indicated for permanent single-tooth restorations: crowns, inlays, onlays, veneers and artificial denture teeth. It additionally covers temporary crowns, inlays, onlays, veneers and temporary bridges. Note the distinction — bridges appear under the temporary indications, so CROWNTEC should not be used for a definitive multi-unit bridge. Its permanent status rests on a flexural strength above 130 MPa (DIN EN ISO 4049) and an E-modulus above 4000 MPa, measured on the finished, correctly post-cured restoration. If you are unsure whether your specific case falls inside the indication, send us the indication and we will check it against the current SAREMCO Instructions for Use.
Which 3D printers is CROWNTEC validated on, and does it run on the Nexa3D XiP?
CROWNTEC is an open third-party resin that SAREMCO validates across many DLP and mSLA systems, and Nexa3D distributes it as a validated material for its LSPc platform — the XiP family. On Nexa3D LSPc it is typically run at 50 or 100 µm layer thickness using the material profile supplied with the resin. Because SAREMCO publishes a separate Fabrication Manual for each printer and curing unit combination, always use the manual that matches your exact hardware rather than a generic profile. Tell us which printer and curing unit you run and we will confirm the validated CROWNTEC settings before you order.
What post-processing does CROWNTEC require, and why does it matter?
CROWNTEC restorations are washed in isopropanol to remove uncured resin, then given a mandatory final UV post-cure at 365/385/405 nm — the Nexa3D xCURE is the recommended unit on the LSPc workflow. Post-curing is not optional or cosmetic: it is the step that develops the full flexural strength and E-modulus and that drives residual monomer down far enough for SAREMCO to state there are no elutable substances in an aqueous environment. Under-curing a CROWNTEC restoration compromises both strength and biocompatibility. Keep to the wash time in the Instructions for Use so fine margins and occlusal detail are not eroded.
Which shade is this, and what other CROWNTEC shades can I order?
This listing is CROWNTEC shade A2 in the VITA classical system (REF 8052), a widely used mid-range tooth shade. SAREMCO stocks CROWNTEC in SW (Snow White / bleach), B1, A1, A2 and A3, with A4, B2, C3, C4 and D3 available on request. CROWNTEC is a one-phase material with pre-matched opacity, so a correctly chosen shade generally does not need layering or a separate staining step to look natural. If you are stocking a lab and want more than one shade, ask us for volume pricing across the shade range rather than ordering bottles individually.
How strong is CROWNTEC compared with a standard temporary crown-and-bridge resin?
CROWNTEC is a filled composite rather than an unfilled model or temporary resin, and that filler is what carries the load. Measured to DIN EN ISO 4049 it reaches a flexural strength above 130 MPa with an E-modulus above 4000 MPa, plus a Barcol hardness above 40 and a depth of cure of at least 1.5 mm. SAREMCO positions finished CROWNTEC devices as around 30 percent stronger than restorations from previous-generation crown-and-bridge materials — that figure is the manufacturer's comparative claim rather than a measured single-standard value, so treat the ISO 4049 numbers as the specification.
How should CROWNTEC be stored, and what is the shelf life?
Store CROWNTEC in its original closed bottle, protected from light and at the temperature range given in the Instructions for Use. Shelf life is 2 years from manufacture when stored correctly. The resin is ready to use with zero pre-mixing — shake the bottle, pour into the vat and print. Handle the liquid, uncured resin with gloves and eye protection: like other methacrylate dental resins it is classified as a skin and eye irritant and a skin sensitiser in the liquid state. That classification applies only to the uncured resin; the finished, properly post-cured restoration is the biocompatible medical device.
Is CROWNTEC a certified medical device?
Yes. saremco print CROWNTEC is a CE-marked Class IIa medical device manufactured by SAREMCO Dental AG in Rebstein, Switzerland, carrying notified body number 0123. SAREMCO also publishes a separate United States version of the Instructions for Use for the product. Additive Plus does not publish a US 510(k) clearance number for CROWNTEC on this page because we have not verified that number against the FDA database — if your practice or lab requires the specific regulatory reference for the US market, contact us and we will obtain written confirmation from SAREMCO or Nexa3D before you order rather than quote an unverified number.

Place your order, or talk to an engineer first

Order Nexa3D (SAREMCO) CROWNTEC A2 Permanent Dental Composite Resin – LSPc/DLP | 0.5 kg direct, or talk to materials engineer

Add to cart