In stock
- Lot-matched pellets black impact-copolymer PP (SG702), sealed 2 lb unit
- Processing sheet molding guidance and key properties
Polypropylene (PP) Black Pellets SG702 - 2 lbs
$50
What your process engineer actually checks
Tough black PP that flows and molds clean
SG702 is a high-impact polypropylene copolymer with good flow (18 MFR) and consistent black color built in, so no masterbatch is needed. It fills thin walls readily and stays rigid and durable for everyday housewares, trim, and housings. Every unit ships with molding guidance.
A materials engineer on the line
Questions on color consistency, impact, or grade selection? A materials engineer answers directly — not a contact-form bot. Most replies in under 4 hours, NDA standard.
PP Black SG702 is a high-impact polypropylene copolymer with good flow (18 MFR) and consistent black color built in — a durable, cost-effective grade for thin-walled housewares, trim, and functional housings.
Why engineers choose PP SG702
A tough, ready-to-mold black polypropylene for everyday parts.
Good flow (18 MFR)
Fills thin-walled housewares and containers cleanly, with easy processing on desktop and standard presses.
Excellent impact resistance
The impact-copolymer base gives greater toughness than homopolymer PP for parts that take handling and drops.
Consistent black color
Pre-colored so you skip masterbatch mixing and get uniform, repeatable black parts straight from the pellet.
Rigid & durable
1,100 MPa flexural modulus keeps housings and trim stiff and dimensionally stable in daily use.
How we supply it
Genuine resin, ready to mold, with the parameters your process engineer needs.
Sourced & lot-traced
Black impact-copolymer PP (SG702), packed in sealed 2 lb units and shipped from US stock. Minimum order 5 units.
Mold ready
Polypropylene absorbs little moisture, so drying is not typically required. Store sealed in a dry place before use.
Molding guidance included
Good 18 MFR flow suits thin-wall parts; melt and mold settings are in the typical impact-copolymer PP range.
Typical applications
Durable, molded-in-black parts for daily use.
Key properties
| Property | Value |
|---|---|
| Melt flow rate (MFR) | 18 g/10 min |
| Density | 0.902 g/cm³ |
| Tensile strength at yield | 20.7 MPa |
| Elongation at yield | 5.0% |
| Flexural modulus | 1,100 MPa |
Polypropylene absorbs little moisture; drying is not typically required. Store sealed and dry.
Not sure PP SG702 is the right grade?
Compare it with other APSX injection-molding pellets we stock.
Why source pellets through Additive Plus
- Injection-molding feedstock, ready to run — genuine grades matched to the APSX-PIM and standard molders, packed in convenient 2 lb units.
- US stock, fast dispatch — ships in 1–2 business days; no overseas lead times on material.
- Engineer on the line — drying schedules, parameters, and grade selection from a team that molds these materials, not a call center.
| Brand | APSX |
| Country of origin | USA |
| Platform | Injection Molding |
| Solid Density g/cm3 | 0.902 |
| Elongation at Yield % | 5.0 |
| Flexural Modulus (MPa) | 1100 |
| Material | PP (Polypropylene) |
| Technology | PIM (Plastic Injection Molding) |
| Reinforcement | Unfilled |
| Application | Engineering, Manufacturing |
We stock 20+ injection-molding grades — PP, PC, acetal, TPE, TPO and glass-filled compounds — and can match a resin to your part and machine. Custom colors and volume packs available.
Other products teams run alongside Polypropylene (PP) Black Pellets SG702 - 2 lbs
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
All-in-one desktop wash and post-cure station for parts printed on the Nexa3D XiP.
- ✓ 5.5 L sealed wash bucket with a basket that takes the XiP build plate whole
- ✓ Magnetic stirring, runs on xCLEAN or isopropanol
- ✓ 405 nm LED cure tower with rotating base and reflector hood
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
CNPC Ti-6Al-4V Grade 5 powder for LPBF — made by CNPC Powder, 15–53 µm, sold in 10 kg containers.
- 10 kg container · $136/kg · $1,360
- Certificate of analysis (COA) for the lot, on request
- Ship date confirmed by email after you order
Manufacturer: CNPC Powder · materials engineer on call · order below or talk to an engineer first.
Made to order
· Ship date confirmed after you order
In stock
Easy-to-print DLP/LCD/mSLA resin with an HDT-B of 272 °C, superior chemical resistance and — unlike most high-temp resins — real toughness instead of brittleness.
- ✓ HDT-B 272 °C · Tg > 300 °C — holds geometry under sustained heat
- ✓ Tough, not brittle — drill, grind and machine without shattering
- ✓ Superior chemical resistance · cytotoxicity passed (ISO 10993)
- ✓ A similar alternative to Loctite IND147 for the same high-temp applications
Made to order
· Ships in <10 business days
Crystal-clear resin for precision parts. Low viscosity = effortless flow & void-free prints.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Rigid resin engineered for outstanding printing resolution — ultra-thin layers and crisp XY detail at high print speed, with low water uptake for dimensional stability in fluids.
- ✓ Ultra-thin layers & crisp XY resolution — fine-detail precision parts
- ✓ 37 MPa tensile · 1900 MPa modulus · 8% elongation — rigid yet not brittle
- ✓ Very low water uptake (0.3%) & strong chemical resistance
- ✓ Fast printing thanks to high reactivity
Made to order
· Ships in <10 business daysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Do I need to dry PP SG702 before molding?
Is the black color pre-mixed into the pellet?
What is PP SG702 used for?
How is an impact copolymer different from homopolymer PP?
How is PP SG702 packaged and what is the minimum order?
Will PP SG702 run on the APSX-PIM desktop molder?
How should I store PP SG702 pellets?
Place your order, or talk to an engineer first
Order Polypropylene (PP) Black Pellets SG702 - 2 lbs direct, or talk to materials engineer