In stock
- Install, operator training, and validated molding parameters
- Tailored warranty with same-week dispatch on critical issues
UNMACHINED OVERSIZED BLOCK FOR APSX-PIM
$60
What your process engineer actually checks
From printed prototype to molded part
We use injection molding to bridge our own printed prototypes into short runs, so install includes validated parameters for your resin and tooling guidance. The team that trains you actually molds parts — not a distributor reading a manual.
An applications engineer on the line
Questions on tooling, shot size, cycle times, or pellet selection? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
6061 Aluminum material with mounting holes to be used to machine blank mold for APSX-PIM.
Dimensions: 4.875″W x 6.075″H x 1.03″D.
Mounting holes are included.
You can use a small press to press down the pins into the mold holes. When you have the pins and bushings installed on the molds, you can use the PIM machine to mate them together. They will not be manually mate since they have a tight fit.
| Brand | APSX |
| Country of origin | USA |
| Platform | FIM |
We mold our own. Tooling and trials on request.
Need a mold built, an insert cut, or a trial run before committing? We can produce tooling and run sample shots on the actual machine so you see molded parts first. Typical tooling lead 2–4 weeks.
Other products teams run alongside UNMACHINED OVERSIZED BLOCK FOR APSX-PIM
Automated support-removal station that dissolves PVA up to 4× faster than motionless water — magnetic rotor circulation, an illuminated tank, and a lift-out rinsing basket for hands-off post-processing.
- ✓ Up to 4× faster PVA removal — cuts operator time up to 80%
- ✓ 200 × 230 × 165 mm basket · 13.7 L illuminated tank with saturation indicator
- ✓ Genuine UltiMaker hardware — made to order, typical lead time 1–2 weeks
Made to order
· Made to order — typical lead time 1–2 weeks (confirmed at checkout)
In stock
· 1–2 Business Days
Bluetooth-enabled desktop air purifier built for resin 3D printing - a HEPA stage plus a carbon stage carrying roughly 5× the activated carbon of a comparable unit, to pull resin odour and VOCs out of the room.
- ✓ Two-stage HEPA + activated-carbon filtration
- ✓ Sits on the bench - no ducting or extraction hookup
- ✓ In US stock - ships in 2 business days
Available in the United States and Canada only.
In stock
· 2 Business Days
In stock
· 1–2 Business Days
In stock
· 1–2 Business Days
In stock
· 1–2 Business Days
Production parts washer sized to the NXE 400 build volume - a 35 L Tritan reservoir with bi-directional variable-speed magnetic-impeller agitation that cleans two full build platforms per cycle.
- ✓ Accepts 2 × NXE400 / NXD200 platforms, or a loose-parts basket
- ✓ Automatic Z-axis and sealed lid cut solvent exposure and evaporation
- ✓ Built to order - request current lead time
Made to order
· Built to order - contact us for current lead time
In stock
Place your order, or talk to an engineer first
Order UNMACHINED OVERSIZED BLOCK FOR APSX-PIM direct, or talk to materials engineer