In stock
- Sealed, chip-tracked cartridge — factory-sealed with its Nexa3D lot.
- Validated LSPc profile — print settings plus wash and cure guidance.
Nexa3D xPRO410 Resin 1.5 kg
xPRO410 is a rigid, general-purpose LSPc photopolymer built on Henkel Loctite® PRO410 chemistry — supplied in a 1.5 kg smart cartridge that drops straight into the Nexa3D XiP and XiP Pro.
- ✓ Rigid general-purpose resin — 41 MPa tensile, Shore D 79
- ✓ Dimensional accuracy within 0.2% after post-cure
- ✓ 1.5 kg smart cartridge for XiP / XiP Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
$144
What your process engineer actually checks
A cure profile that hits 0.2%
xPRO410's 0.2% dimensional accuracy and Shore D 79 are post-cure numbers. The smart cartridge carries the validated XiP profile, and we share the XiP Cure settings so your parts land on the datasheet — not close to it.
A materials engineer on the line
Resin selection, exposure tuning, post-cure and finishing — answered by engineers who print Nexa3D LSPc in-house. Sub-4h reply, NDA standard.
Nexa3D xPRO410 in the 1.5 kg smart cartridge is the rigid, general-purpose LSPc photopolymer for the XiP and XiP Pro desktop printers — built on Henkel Loctite® PRO410 chemistry for fast, accurate prototypes and rigid functional parts.
Why engineers choose xPRO410
A rigid, affordable general-purpose resin that keeps up with same-day iteration.
Drop-in smart cartridge
The 1.5 kg cartridge loads straight into the XiP or XiP Pro — the printer reads the material and pulls the right settings. No decanting, no manual vat fill.
Accuracy you can hold
Dimensional accuracy within 0.2% after post-cure, with an exceptional surface finish straight off the build platform.
Rigid and predictable
2365 MPa tensile modulus, 41 MPa tensile strength, Shore D 79 — stiff parts for real form, fit and function testing.
Lowest-cost general purpose
One of the most affordable general-purpose LSPc materials — iterate daily on the desktop without watching material cost.
How we supply it
Lot-sealed cartridge, a validated print profile and post-cure guidance in every order.
Sealed smart cartridge
Every 1.5 kg cartridge ships sealed and chip-tracked with its Nexa3D lot. Load and print — no mixing, no additives.
Validated XiP profile
The cartridge carries Nexa3D’s validated LSPc profile; our engineers add exposure and orientation guidance for your parts.
Wash & cure to spec
xClean or IPA wash, then post-cure in XiP Cure or xCURE at 405 nm. Parts reach full mechanical and dimensional spec.
Typical applications
Where a rigid, fast, affordable general-purpose resin earns its place.
Physical & mechanical properties
| Property | Method | Value (post-cured) |
|---|---|---|
| Tensile modulus | ASTM D638 | 2365 MPa |
| Tensile strength | ASTM D638 | 41 MPa |
| Elongation at break | ASTM D638 | 5.5% |
| Flexural modulus | ASTM D790 | 2517 MPa |
| Notched Izod impact | ASTM D256 | 25 J/m |
| Shore D hardness | ASTM D2240 | 79 |
| HDT @ 0.45 MPa | ASTM D648 | 61°C |
| Water absorption | ASTM D570 | 0.46% |
| Viscosity @ 25°C | ASTM D7867 | 400–600 cP |
Values are post-cured per the manufacturer’s technical data sheet and are identical to the 5 kg NXE format — the cartridge changes, the chemistry does not.
Printer compatibility
- XiP — 7.7 × 4.5 × 8.3 in / 195 × 115 × 210 mm build volume, 405 nm LSPc.
- XiP Pro — 11.5 × 6.4 × 16.1 in / 292 × 163 × 410 mm build volume, 405 nm LSPc.
- For the NXE 400 / 400Pro, order xPRO410 in the 5 kg container instead.
Not sure xPRO410 is the right resin?
Compare it against the tougher and higher-temperature cartridges in the same LSPc family.
Why source xPRO410 through Additive Plus
- We run LSPc daily. Print profiles, exposure tuning and post-cure settings from a team that prints these resins in-house — not a catalog reseller.
- US inventory, real support. Ships from US stock; volume orders and official POs handled by a materials engineer, not a form.
- Full workflow under one roof. Resin, wash and cure stations, spares and application support — one partner for the whole LSPc line.
- <24h engineer response · NDA standard.
| Brand | Nexa3D |
| Available colors | Black |
| Weight | 1.5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Platform | XiP, XIP PRO |
| Technology | LSPc, DLP, XiP |
| Resin Type | Rigid |
| Application | Engineering, Manufacturing |
Product videos
Order the LSPc Resin Sample Kit for 12 printed Nexa3D material samples, or send us your STL and we'll print a paid benchmark part in xPRO410.
Other products teams run alongside Nexa3D xPRO410 Resin 1.5 kg
Tough impact-resistant resin for jigs, housings & prototypes. High green strength, works with DLP/LCD.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Print exceptionally tough 3Y zirconia (ZrO₂) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense, biocompatible oxide ceramic.
- ✓ 950 MPa 4-point bending strength at >99.5% density — the strongest single oxide in the range
- ✓ Colourable, biocompatible, sub-0.5 µm grain — jewellery, dental and precision parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Print ultra-high-temperature ceramic parts on a standard FFF printer. A ZrB2–SiC–B4C composite formulated for pressureless sintering — built for aerospace and defence conditions.
- ✔ ZrB2 – SiC – B4C composite · pressureless sintering, no hot press
- ✔ Very high temperature and oxidation resistance
- ✔ Genuine Zetamix by Nanoe · 500 g spool · 1.75 mm
In stock
· Ships from California · 10–20 business days
In stock
Precise, flexible resin for orthodontic indirect bonding trays — now for the XiP.
- ✓ Sets brackets accurately, then flexes for easy, non-stick release
- ✓ Biocompatible resin purpose-built for IBT workflows
- ✓ 1 kg cartridge for Nexa3D XiP and XiP Pro (LSPc)
In stock
· 2 Business Days
Print silicon carbide (SiC) ceramic parts on the 3DCeram M.A.T. print-debind-sinter workflow — ESA/ESTEC-tested for high-temperature, high-conductivity applications.
- ✓ ESA/ESTEC-verified: 423 MPa flexural strength, 82 W/m-K thermal conductivity
- ✓ Solid-state sintered to 2100°C — dense, chemically inert, no powder bed
- ✓ Qualified for the 3DCeram M.A.T. platform — quote-based pricing, request a quote
In stock
· Contact for lead time
Carbon-fiber-reinforced PET filament for FDM 3D printing — high strength (87 MPa tensile) and stiffness (6025 MPa modulus) with excellent dimensional stability, for structural brackets, tooling, and end-use parts under load.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which Nexa3D printers does the 1.5 kg xPRO410 cartridge fit?
Is the cartridge resin the same as the 5 kg xPRO410?
What post-processing does xPRO410 require?
What color is xPRO410 and how rigid is it?
How should I store the xPRO410 cartridge?
Can I order a trial quantity before committing to volume?
What temperature can xPRO410 parts withstand?
Place your order, or talk to an engineer first
Order Nexa3D xPRO410 Resin 1.5 kg direct, or talk to materials engineer