Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
With every system
- Install, operator training, and validated molding parameters
- Tailored warranty with same-week dispatch on critical issues
Materials, Other 3D Printing Materials, Other Equipment, Plastic Injection Molding Machine, Plastic Pellets
Acetal (Delrin) 900P Black Pellets - 2 lbs
Acetal Homopolymer with low viscosity and improved processing.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
$65
Price held 7 days after order.
Install + training included
Tailored service plan
Built for production teams
What your process engineer actually checks
From printed prototype to molded part
We use injection molding to bridge our own printed prototypes into short runs, so install includes validated parameters for your resin and tooling guidance. The team that trains you actually molds parts — not a distributor reading a manual.
An applications engineer on the line
Questions on tooling, shot size, cycle times, or pellet selection? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
About this product
Delrin® 900P BK602 is a low-viscosity acetal homopolymer (POM) resin featuring internal lubrication and mold release. This grade is engineered for improved processability, offering excellent flow for filling complex molds while retaining the high strength, stiffness, and low friction that make acetal a premier choice for precision mechanical components and wear-resistant applications.
Key Features & Benefits
- Low Viscosity & High Flow (25 MFR): Enables easy filling of thin walls and complex geometries, reducing injection pressure and cycle times.
- Excellent Stiffness & Strength: Provides high mechanical strength and rigidity for load-bearing components.
- Good Toughness: Offers a balanced impact resistance for durable parts.
- Low Friction & Wear Resistance: Inherently slick and lubricated for moving parts, reducing noise and wear.
- Improved Mold Release: Facilitates easier part ejection from the mold, improving productivity.
Primary Applications
- Gears, Bearings, and Bushings
- Automotive Fuel System Components
- Consumer Appliance Parts
- Fasteners and Clips
- Fluid Handling Components
- Conveyor System Parts
Processing Notes (Injection Molding)
- Drying: Required for 2-4 hours at 80°C. Maximum moisture content should be < 0.20%.
- Melt Temperature: 210 – 220°C (410 – 428°F)
- Mold Temperature: 80 – 100°C (176 – 212°F)
| Brand | APSX |
| Country of origin | USA |
| Platform | FIM |
| Solid Density g/cm3 | 1.42 |
| Tensile Stress at Yeild MPa | 70 |
| Melt Flow Rate 230C/2/16 kg | 25 g/10 min |
| Charpy Notched Impact Strength | -30 C: 6 kJ/m2 23 C: 7 kJ/m2 |
Need tooling or a specific resin?
We mold our own. Tooling and trials on request.
Need a mold built, an insert cut, or a trial run before committing? We can produce tooling and run sample shots on the actual machine so you see molded parts first. Typical tooling lead 2–4 weeks.
Other products teams run alongside Acetal (Delrin) 900P Black Pellets - 2 lbs
DLP 3D Printing Materials
Loctite 3D Cleaner T — Hot-Bath Resin Cleaner for High-Temp & FST Resins | 18 kg
Hot-bath cleaning liquid that removes uncured resin from demanding SLA/DLP parts at temperatures up to 80 °C — formulated to avoid peroxide generation when heated.
- ✓ Runs hot to 80 °C safely — no peroxide formation
- ✓ For high-temperature and FST resins (e.g. Loctite 3955 HDT280 FST)
- ✓ 18 kg · ships in 1–2 business days from US stock
From $326
Add to cart
In stock
· 2 Business Days — ships from US inventory.
ORYX WashStation · Support removal
Oryx SCAWaterjet Support Removal Spray Booth — Pressurized Waterjet | 5 gal
Enclosed pressurized-waterjet spray booth for fast, targeted support-material removal on 3D-printed parts — manual dual-pressure wands, no heat and no detergent, cleaning in minutes.
- ✓ Dual-pressure waterjet wands up to 1700 psi — bulk and fine detail
- ✓ No heat, no detergent, no plumbing required — mobile or direct-plumb
- ✓ US-built · CE / cTÜVus · 1-year warranty · quote for pricing
In stock
· US-built — ships from Additive Plus; lead time confirmed at quote. 1-year warranty, setup guidance included.
Composite Tooling · SLS
KSPA12BK Nylon Powder – High-Performance Black SLS Printing Material for Durable Parts
Cost per kg: $75. Cost per pound: $34
The plastic nylon powder is supplied in a packaging of 10 kg/22.05 lbs.
A premium black nylon powder for superior performance.
From $750
Add to cart
In stock
Media blasting · Surface finishing
AM Solutions M1 Basic — Entry-Level Vibratory Finishing System
Entry-level automated vibratory finishing system that deburrs, smooths and cleans 3D-printed parts with a high-frequency processing bowl — a cost-effective way to bring finishing in-house.
- ✓ Automated deburr, smooth and clean for metal and plastic parts
- ✓ High-frequency 3,600 RPM bowl · quiet ≤78 dB(A)
- ✓ Lead time: 5–8 weeks — built to order · install + training included
- ✓ Starter consumable included — 25 L of finishing media, ready to run out of the box
From $32460
Add to cart
On backorder
· Lead time: 5–8 weeks — built to order. Install and operator training included.
Plastic Injection Molding Machine
Acetal (Celcon) M270 Natural Pellets - 2 lbs
High-Flow Acetal Copolymer for Complex, Hard-to-Fill Molds.
Price is for a 2-lb unit. Minimum order: 5 units (10 lbs total).
From $65
Add to cart
In stock
Dental · LSPc, DLP, XiP
Nexa3D KeyModel Ultra Ivory Resin 5kg
KeyModel Ultra Resin, Ivory, 5kg. Designed for 3D printing of dental and orthodontic models, for use with Nexa3D NXE series printers.
From $426
Add to cart
In stock
LPBF (DMLS) 3D Printing Materials · Metal LPBF
IN718 Nickel Alloy Powder for Metal 3D Printing | LPBF Compatible - 10 kg / 22 lbs
The workhorse superalloy. Age-hardenable. High-strength. Genuine Carpenter PowderRange® 718 (Inconel® 718) nickel superalloy for LPBF, EBM & DED metal 3D printing.
- ✓ High tensile, fatigue & creep strength to 1300°F (704°C)
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ Full COA on every lot · fast dispatch from L.A.
Prints IN718
From $965
Get quote
In stock
· 2–5 business days · stock moves fast, confirm at order
Composite Tooling · SLS
PA12 Nylon Powder SLS Material – In Stock in CA, Ships from Los Angeles
White PA12 nylon for SLS — clean white parts, strong mechanicals and consistent powder flow. Stocked in Los Angeles, ships fast.
- 10 kg sealed package · $75/kg · in stock
- Fine ~50 µm powder · narrow PSD · high reusability
- Materials engineer on call · setup recommendations · NDA on request
For CO₂ / infrared SLS systems · order direct below or talk to an engineer first.
From $750
Add to cart
In stock
From production teams running Acetal (Delrin) 900P Black Pellets - 2 lbs
Unedited feedback from teams who bought and run Acetal (Delrin) 900P Black Pellets - 2 lbs.
★★★★★
We bridged a 3D-printed prototype to a 500-part run on the bench machine. Cycle times were exactly as quoted.
MK
Marcus K.
Process Engineer · Consumer Products
★★★★★
Asked about tooling for a small insert. An engineer walked us through it and ran a trial shot, no sales pitch.
PS
Priya S.
R&D Lead · Medical Devices
★★★★★
Install included validated parameters for our resin. First parts were in spec — minimal trial-and-error.
DR
Diego R.
Production Lead · Automotive
Place your order, or talk to an engineer first
Order Acetal (Delrin) 900P Black Pellets - 2 lbs direct, or talk to materials engineer