Made to order
- Sealed, chip-tracked cartridge — factory-sealed with its Nexa3D lot.
- Pre-heat & thermal-bake steps — the cycle that unlocks 230°C heat deflection.
Nexa3D xPEEK147-Black Resin 1.5 kg for XiP
xPEEK147 Black brings PEEK-range stiffness and high-temperature performance to the Nexa3D XiP and XiP Pro — supplied in a 1.5 kg smart cartridge, with heat deflection up to 230°C after a thermal post-cure.
- ✓ Heat deflection up to 230°C (0.45 MPa) after the 170°C bake
- ✓ PEEK-range stiffness — 3220 MPa modulus, Shore D 94
- ✓ 1.5 kg smart cartridge for XiP / XiP Pro (405 nm LSPc)
- ✓ Currently on backorder — lead time confirmed before you commit
$513
What your process engineer actually checks
The 230°C number depends on the bake
xPEEK147 only reaches heat deflection up to 230°C after a 3-hour 170°C thermal post-cure. On a UV-only cure you get 114°C at 1.82 MPa. We say that plainly and supply the full cycle, so nobody qualifies a part against a number their process cannot produce.
A materials engineer on the line
Pre-heat handling, exposure tuning, the thermal bake and current availability — answered by engineers who print Nexa3D LSPc in-house. Sub-4h reply, NDA standard.
Nexa3D xPEEK147 Black in the 1.5 kg smart cartridge brings PEEK-range stiffness and high-temperature performance to the XiP and XiP Pro desktop printers — 80 MPa tensile strength, Shore D 94 and, after a thermal post-cure, heat deflection up to 230°C.
Why engineers choose xPEEK147
The LSPc resin for parts that have to stay stiff when everything gets hot.
Heat deflection up to 230°C
With the 3-hour 170°C thermal post-cure, HDT at 0.45 MPa reaches up to 230°C. On a UV-only cure you get 114°C at 1.82 MPa — the bake is what unlocks the top of the range.
PEEK-range stiffness
3220 MPa tensile modulus, 3553 MPa flexural modulus and Shore D 94 — among the stiffest photopolymers you can run on a desktop LSPc printer.
Drop-in smart cartridge
The 1.5 kg cartridge loads straight into the XiP or XiP Pro — the printer reads the material and pulls the right settings. No decanting, no manual vat fill.
Electrically insulating
Volume resistivity 3.6×10¹⁶ Ω·cm and 29 kV/mm electric strength, with low 0.24% water absorption — useful where heat and insulation meet.
How we supply it
Lot-sealed cartridge plus the pre-heat and thermal-cure steps this material actually needs.
Pre-heat before you print
xPEEK147 needs 60°C for 24 h before use and must never exceed 65°C. We flag this on every order — skipping it is the usual cause of failed first builds.
Validated XiP profile
The cartridge carries Nexa3D’s validated LSPc profile; our engineers add exposure and orientation guidance for stiff, thick-section parts.
Wash, cure, then bake
xClean (max 2 min) then IPA (max 5 min). UV post-cure in XiP Cure, then 3 h at 170°C if you need the full 230°C heat deflection.
Typical applications
Where heat, stiffness and dimensional stability have to hold together.
Physical & mechanical properties
| Property | Method | Value |
|---|---|---|
| Tensile modulus | ASTM D638 | 3220 MPa |
| Ultimate tensile strength | ASTM D638 | 80 MPa |
| Elongation at break | ASTM D638 | 3.2% |
| Flexural modulus | ASTM D790 | 3553 MPa |
| Flexural stress | ASTM D790 | 127 MPa |
| Notched Izod impact | ASTM D256 | 14.6 J/m |
| Shore D hardness | ASTM D2240 | 94 |
| HDT @ 1.82 MPa (UV cure) | ASTM D648 | 114°C |
| HDT @ 0.45 MPa (after 170°C bake) | ASTM D648 | up to 230°C |
| Water absorption (24 h) | ASTM D570 | 0.24% |
| Viscosity @ 25°C | ASTM D7867 | 1900–2300 cP |
| Electric strength | ASTM D149 | 29 kV/mm |
Values from the manufacturer’s xPEEK147 technical data sheet (2024 rev.) — identical to the 5 kg NXE format. Mechanical figures vary with the post-cure route; the values above reflect the standard cycle, with the thermal bake giving the highest heat deflection.
Printer compatibility
- XiP — 7.7 × 4.5 × 8.3 in / 195 × 115 × 210 mm build volume, 405 nm LSPc.
- XiP Pro — 11.5 × 6.4 × 16.1 in / 292 × 163 × 410 mm build volume, 405 nm LSPc.
- For the NXE 400 / 400Pro, order xPEEK147 in the 5 kg container instead.
Not sure xPEEK147 is the right resin?
Compare it against the tougher and lower-cost cartridges in the same LSPc family.
Why source xPEEK147 through Additive Plus
- We run LSPc daily. Print profiles, pre-heat handling, exposure tuning and the 170°C bake cycle from a team that prints these resins in-house.
- Honest lead times. This cartridge is currently on backorder — we confirm the real date before you commit, and flag the 5 kg format if you need material sooner.
- Full workflow under one roof. Resin, wash and cure stations, spares and application support — one partner for the whole LSPc line.
- <24h engineer response · NDA standard.
| Brand | Nexa3D |
| Available colors | Black |
| Weight | 1.5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Platform | XiP, XIP PRO |
| Technology | LSPc, DLP, XiP |
| Resin Type | High-temp |
| Application | Engineering, Manufacturing |
Product videos
The 5 kg container format for the NXE 400 series is stocked. Tell us your printer and timeline and we'll confirm what we can ship this week.
Other products teams run alongside Nexa3D xPEEK147-Black Resin 1.5 kg for XiP
Highly impact-resistant, flexible final-part resin with good toughness, scratch resistance and heat resistance (HDT-B 90 °C), plus a clean regulatory profile.
- ✓ 44 J/m notched · 350 J/m unnotched Izod · 16% elongation — durable end-use parts
- ✓ HDT-B 90 °C, UV-stable, low water uptake, cytotoxicity passed (ISO 10993)
- ✓ Scratch-resistant; uncolored, black, blue, pink, grey
- ✓ A similar option to Loctite IND406 / 3843 for final-part production
Made to order
· Ships in <10 business days
Fast-calibration black resin (3x speed!) for professional finishes on SLA/DLP printers.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
In stock
· 1–2 Business Days
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
Extreme-temp resin: HDT230°C for molding/dies. Stiff, dimensionally stable & production-ready.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Zetasinter Chamber sinters printed ceramic parts in ambient air, up to 1600 °C.
- ✔ Sinters in ambient air — no gas supply, no atmosphere control to manage
- ✔ 1600 °C maximum: alumina at 1550 °C, white and black zirconia at 1475 °C
- ✔ 250 × 250 × 250 mm chamber takes real parts, not only test pieces
Freight and installation requirements confirmed with you before the order is placed.
Made to order
· Ships from California · timeline confirmed at quotation
In stock
· 1–2 Business Days
PLA filament for FDM 3D printing — high stiffness (97 MPa flexural strength), a fine, paintable surface finish, and the widest, most forgiving process window of any CreatBot filament, for concept models, display parts, and low-stress prototypes.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What temperature can xPEEK147 parts actually withstand?
Does the 147 in xPEEK147 mean a heat deflection of 147°C?
Which Nexa3D printers does the 1.5 kg xPEEK147 cartridge fit?
This cartridge shows as on backorder — when can I get it?
Does xPEEK147 need to be pre-heated before printing?
How stiff and how brittle is xPEEK147?
Is xPEEK147 certified for flammability or biocompatibility?
Place your order, or talk to an engineer first
Order Nexa3D xPEEK147-Black Resin 1.5 kg for XiP direct, or talk to materials engineer