Made to order
- Validated cure profile + datasheet for the printers we sell
- Mutual NDA before any file or spec review
Loctite 3D IND147 High Temp Black 1 kg
Extreme-temp resin: HDT230°C for molding/dies. Stiff, dimensionally stable & production-ready.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
$260
What your process engineer actually checks
Validated, load-and-print cure profiles
Every resin ships with a tested exposure/cure profile for the printers we sell and a datasheet covering viscosity, cure energy, mechanical properties, and shelf life. Dial the build in once, reorder the same chemistry.
An materials engineer on the line
Questions on layer adhesion, post-cure schedules, elongation, yellowing, or chemical resistance? A materials engineer answers directly. Most replies in under 4 hours, NDA on request.
Engineered to conquer environments where conventional resins fail, LOCTITE 3D IND147 redefines high-temperature performance with an industry-leading heat deflection temperature (HDT) exceeding 230°C. This specialized photopolymer delivers unprecedented thermal stability for demanding tooling and molding applications, maintaining critical dimensional accuracy even under sustained heat exposure.
Revolutionary Thermal Performance
- 230°C+ HDT: Withstands direct contact with molten materials and high-pressure steam
- Zero-deformation rigidity: Exceptional stiffness prevents warping during repeated thermal cycles
- Thermo-mechanical integrity: Retains toughness while resisting creep under mechanical stress
Precision-Engineered for Critical Applications
- High-temp tooling: Molds for silicone casting, low-pressure PU, and customized molds
- Functional prototyping: Directly test parts under end-use thermal conditions
- Custom cavity fabrication: Create bespoke molds for short-run production
- Uncompromised Output Quality
- Production-grade surface finish: Near-injection-molded aesthetics without post-processing
- Micron-level stability: ≤0.1% dimensional deviation across 50+ thermal cycles
- Cross-industry compatibility: Automotive test fixtures, consumer goods tooling, industrial molding
Compatible with open-source DLP/SLA systems (385-420nm).
| Brand | Henkel Loctite |
| Available colors | Black |
| Print Feature | High Temp |
| Young's Modulus (MPa) | 1150 ± 160 / 3190 ± 80 |
| Tensile Stress at Break (MPa) | 31 ± 2 / 67 ± 16 |
| Elongation at Break (%) | 6 ± 2 / 2.4 ± 0.7 |
| Flexural Modulus (MPa) | 1170 ± 100 / 3690 ± 60 |
| IZOD Impact (Notched, J/m) | 14.6 ± 0.1 |
| Shore Hardness (3s) | 94 |
| [email protected] MPA (°C) | 235-291 |
| HDT at 1.82 MPa | 136-163 |
| Water Absorption (24hr) % | 0.24 |
| Water Absorption (48hr) % | 0.39 |
| Water Absorption (72hr) % | 0.78 |
| Solid Density g/cm3 | 1.25 / 1.27 |
| Heat Capacity J/(g*K) | 1.3 |
| Poisson’s Ratio | 0.30 ± 0.03 |
| CTE (-30°C to 45°C) µm/(m·K) | 114 |
| Tg °C | 205-212 |
| Resin Type | High-temp |
| Application | Engineering, Jigs & Fixtures, Manufacturing |
We formulate and qualify. Custom variants on request.
Need a tuned resin, a filled or castable formulation, or a profile for a printer we don't list yet? Our materials team qualifies custom formulations and prints test specimens before you commit. Typical lead 2–4 weeks.
Other products teams run alongside Loctite 3D IND147 High Temp Black 1 kg
Corrosion-resistant. Biocompatible. Production-ready. Genuine Carpenter PowderRange® 316L austenitic stainless steel for LPBF, EBM & DED metal 3D printing.
- ✓ Gas-atomized, low-oxygen — COA on request
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ In US stock — ready to ship
In stock
· In US stock · ready to ship
Low-viscosity, semi-translucent laser-SLA resin with a 135 °C glass transition — built for prototypes and quick molds that must hold their shape under heat.
- ✓ Tg 135 °C · 87 Shore D · 65 MPa tensile · 110 MPa flexural
- ✓ 340 cps low-viscosity · 0.08–0.12 mm layers on Kings industrial SLA (355 nm)
- ✓ In stock — ships in 1–2 business days from our Los Angeles warehouse
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.
Flexible TPE pellets qualified for large-format additive manufacturing (LFAM) — rubber-like elasticity and a range of Shore-hardness grades for big seals, gaskets, and grips at pellet cost.
- ✓ Rubber-like flexibility with vibration and impact damping — soft to semi-rigid grades
- ✓ Ships dry with a lot datasheet + drying, flow, and retraction parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Tough impact-resistant resin for jigs, housings & prototypes. High green strength, works with DLP/LCD.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Ships in about 2 weeks — final date confirmed after you order
Print robust, leachable Silicore foundry cores on 3DCeram's Ceramaker laser-SLA platform for complex, demanding castings.
- ✓ Higher-strength silica core formulation — survives handling and assembly
- ✓ Good leachability and low shrinkage (0.20% max to 1500 °C); all alloys except cobalt
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
- ✔ 295 MPa average flexural strength, 213 GPa elastic modulus and 3.9 g/cc after solid-state sintering at 1650°C
- ✔ Debind and sinter parameters plus the full datasheet included with every spool
- ✔ 1.75mm ceramic feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review
In stock
· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.
Print leachable fused-silica investment-casting cores on 3DCeram's Ceramaker laser-SLA platform for complex internal casting geometries.
- ✓ 40% porosity, excellent leachability — cleanly removed after casting
- ✓ Very low expansion (0.07% max dilatation to 1500 °C) holds core dimension through the pour
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
Low-viscosity ESD resin with real toughness for final-part production — dissipative volume resistivity (5.5 × 10⁷ Ω·cm) plus 65 MPa strength and HDT-B 94 °C.
- ✓ ESD-dissipative — volume resistivity 5.5 × 10⁷ Ω·cm for static-safe parts
- ✓ Tough & strong — 65 MPa tensile, 2700 MPa modulus, 86 Shore D
- ✓ HDT-B 94 °C, excellent chemical resistance; easy low-viscosity processing
- ✓ A similar option to Loctite IND3380 ESD
Made to order
· Ships in 5–10 business daysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Place your order, or talk to an engineer first
Order Loctite 3D IND147 High Temp Black 1 kg direct, or talk to materials engineer