In stock
- Lot-matched resin sealed and batch-traceable for repeatable prints
- Validated LSPc profile exposure and cure settings for your Nexa3D printer
Nexa3D xMODEL 2505 Dental Model Resin – Thermoforming Grade for NXE 400 | 5 kg
High-resolution dental model resin — beige, meth-acrylate based, formulated with BASF Forward AM. Built for dental models, removable dies and thermoformed appliance formers on the Nexa3D NXE 400 and NXD200, with curing profiles developed for 100 µm and 50 µm layer heights and room-temperature processing. Printed models wash in water only, with no finishing detergents required, then UV post-cure. Supplied in 5 kg bottles from US stock.
$501
What your process engineer actually checks
What the data sheet actually covers
xMODEL 2505 is a dental MODEL material — models, removable dies and thermoforming formers. Nexa3D publishes cure profiles for 100 µm and 50 µm on the NXE 400 and NXD200, plus mechanical data to ASTM D638 and D790. It carries no ISO 10993 or medical device certification, so we do not position it for patient contact.
A materials engineer on the line
Questions on cure settings, finishing or switching from another resin? Our engineers run Nexa3D LSPc resins in-house. Sub-4h reply, NDA standard.
Nexa3D xMODEL 2505 is a beige, meth-acrylate dental model resin formulated with BASF Forward AM for high-resolution models, removable dies and thermoforming formers. It prints on the Nexa3D NXE 400 and NXD200 with published cure profiles at 100 µm and 50 µm, and finished models wash in water alone — no finishing detergents.
Why dental labs choose xMODEL 2505
Model-grade stiffness, two validated layer profiles and a water-only wash.
2500 MPa Young’s modulus
Model-grade stiffness. Dies and arch models keep their geometry under thermoforming pressure and repeated seating on the bench.
50 µm and 100 µm profiles
Nexa3D publishes cure settings at both layer heights, so you trade surface detail against throughput without re-deriving exposure.
Water wash, no detergents
Printed models rinse in plain water before UV cure. No finishing detergent inventory and one less solvent step on the lab bench.
Formulated with BASF Forward AM
54 MPa tensile at break and 83 MPa flexural strength, from a lot-traceable chemistry developed with BASF Forward AM.
How we supply xMODEL 2505
From vendor validation to the cure chamber in your lab.
Formulated & tested
xMODEL 2505 is developed with BASF Forward AM and validated on the NXE 400 and NXD200 at 100 µm and 50 µm before it reaches our catalogue.
Stocked & lot-matched
5 kg bottles ship from US stock in two business days, batch-traceable so a lab can repeat a model run months later on the same chemistry.
Print, wash & cure
Roll the bottle with ceramic beads for around 30 minutes, pour slowly into the vat, wash models in water only, then UV post-cure.
Physical and mechanical properties
| Property | Method | Value |
|---|---|---|
| Young’s modulus | ASTM D638 | 2500 MPa |
| Tensile stress at break | ASTM D638 | 54 MPa |
| Elongation at failure | ASTM D638 | 4% |
| Flexural strength | ASTM D790 | 83 MPa |
| Flexural modulus | ASTM D790 | 2150 MPa |
Printed properties depend on part geometry, orientation and post-cure. Values are typical, not a specification. Mechanical and physical properties depend heavily on printing parameters and part geometry; validated workflows may need adjusting for unusually thick or thin geometries.
Typical applications
Where dental labs put xMODEL 2505 to work.
Compatible printers & post-processing
xMODEL 2505 runs on the Nexa3D NXE 400 and the NXD200, with curing profiles developed for 100 µm and 50 µm layer heights. The resin is processed at room temperature — no bottle or vat pre-heating. Mix thoroughly before every print job: roll the bottle with ceramic beads for around 30 minutes, then pour slowly into the vat and let trapped bubbles clear before starting the build. Post-processing differs from most other Nexa3D LSPc resins — models wash with water only, with no finishing detergents required, and are then UV post-cured. Filter reclaimed resin back into the bottle rather than leaving it standing in the vat. xMODEL 2505 is not qualified for the XiP or XiP Pro desktop platforms.
Not sure xMODEL 2505 is the right resin?
Three alternatives from the same Nexa3D LSPc line.
Why source xMODEL 2505 through Additive Plus
- Genuine Nexa3D xMODEL 2505 — lot-matched 5 kg bottles from US stock, dispatched in two business days
- Validated LSPc exposure and cure profiles for the NXE 400 and NXD200 at 100 µm and 50 µm
- Materials engineers who run Nexa3D LSPc resins in-house — sub-4h reply, NDA standard
- Volume pricing and official purchase orders supported for dental lab production accounts
Downloads
| Brand | Nexa3D |
| Available colors | Beige |
| Weight | 5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Technology | LSPc |
| Package | 5 kg bottle |
| Material form | Liquid photopolymer resin |
| Printer | NXD200, NXE 400 |
| Tensile Strength | 54 MPa |
| Tensile Modulus (MPa) | 2500 MPa |
| Elongation at Break (%) | 4% |
| Flexural Strength (MPA) | 83 MPa |
| Flexural Modulus (MPa) | 2150 MPa |
| Resin Type | Dental, General |
| Application | Engineering, Manufacturing |
Product videos
We stock the full Nexa3D LSPc resin line and support official purchase orders and volume pricing. Tell us your printer and monthly volume and we'll match the right resin and quantity.
Other products teams run alongside Nexa3D xMODEL 2505 Dental Model Resin – Thermoforming Grade for NXE 400 | 5 kg
Print ultra-high-temperature ceramic parts on a standard FFF printer. A ZrB2–SiC–B4C composite formulated for pressureless sintering — built for aerospace and defence conditions.
- ✔ ZrB2 – SiC – B4C composite · pressureless sintering, no hot press
- ✔ Very high temperature and oxidation resistance
- ✔ Genuine Zetamix by Nanoe · 500 g spool · 1.75 mm
In stock
· Ships from California · 10–20 business days
High-rebound black elastomer: no post-cure! Perfect for midsoles, soft inserts & lattices.
Availability: confirmed at order. Supplier stock for this line varies — we verify availability and lead time on every order before processing, and offer an equivalent or a full refund if an item cannot be supplied. Cubic Ink equivalents →
Made to order
· Available to order — we confirm the lead time by email within one business day of your order.
Carbon-fiber-reinforced high-temperature nylon filament for FDM 3D printing — the strongest, stiffest, most heat-resistant material in the CreatBot range (125 MPa tensile, 8512 MPa flexural modulus, 188°C glass transition), for demanding structural and end-use parts.
- ✓ ±0.02mm diameter tolerance — consistent extrusion, low jam risk
- ✓ Validated CreatBot F430 print profile + datasheet included
- ✓ In stock, ships in 1–2 business days
In stock
The SLM 280 SS304 Build Platform is a precision-ground stainless steel build plate engineered for reliable LPBF production. Manufactured from high-grade 304 stainless steel and designed as a direct OEM-compatible solution, this SLM 280 metal build plate delivers excellent flatness, thermal stability, and repeatable first-layer performance for industrial additive manufacturing.
Need a custom steel build platform for another printer or alternative thickness? Request a custom quote — we manufacture precision stainless steel and specialty alloy build plates for most industrial LPBF systems.In stock
· Express 2–3 wks · Standard 6–8 wks
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
Bulk washing solvent for rinsing uncured resin off SLA and LSPc 3D-printed parts — holds around 3× the dissolved resin of IPA and has a higher flash point, in a 5-gallon pack that lowers cost per litre for production.
- ✓ ~3× the resin capacity of IPA — fewer changeouts, less waste
- ✓ Higher flash point than IPA · leaves no greasy residue · water-rinse after
- ✓ 5 gallon (18.9 L) · US-made · available on request (not in stock)
Out of stock
· Not in stock — available on request
Bio-based PLA pellets qualified for large-format additive manufacturing (LFAM) — easy, low-warp, high-stiffness big concept models and masters at pellet cost.
- ✓ Bio-based, low-warp, and stiff — ideal for large concept models and layup masters
- ✓ Ships dry with a lot datasheet + drying and extrusion parameters
- ✓ Lead time: 1–2 business days from L.A. stock — volume & PO on request
In stock
· 1–2 Business Days
Versatile. Weldable. Cost-effective. Genuine Carpenter PowderRange® 304 / 304L austenitic stainless steel for LPBF & EBM metal 3D printing.
- ✓ Gas-atomized, low-oxygen — COA on request
- ✓ Sold in small, workable volumes — no large mill minimums
- ✓ In US stock — ready to ship
In stock
· In US stock · ready to ship
Print the strongest oxide in the range — alumina-toughened zirconia — on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a dense biocompatible ceramic.
- ✓ 1094 MPa 4-point bending strength at >5.2 g/cc — highest of the 3DCeram oxides
- ✓ Biocompatible and thermal-shock resistant — implants, dental and high-load wear parts
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which 3D printers is Nexa3D xMODEL 2505 compatible with?
What colour and pack size does xMODEL 2505 come in?
How are xMODEL 2505 models washed and post-cured?
What is xMODEL 2505 best used for?
How should xMODEL 2505 be stored and handled before printing?
Is xMODEL 2505 certified biocompatible or medical grade?
Can we test xMODEL 2505 before committing to volume?
Place your order, or talk to an engineer first
Order Nexa3D xMODEL 2505 Dental Model Resin – Thermoforming Grade for NXE 400 | 5 kg direct, or talk to materials engineer