In stock
Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
$779
Nexa3D offers the XiP Pro build platform in two styles, and this is the slotted version. The openings let resin drain and ease the peel forces on each layer, which helps when you are running tall or large parts. When a plate warps or stops holding prints, a fresh one restores dependable adhesion.
Compatibility & Specifications
- Type: slotted build platform
- Benefit: resin drainage and reduced peel force on large / tall builds
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro slotted build plate (XiPPro_BP_SLOTTED)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Not sure whether slotted or solid suits your parts? Ask our engineers — they run these machines. Sub-24-hour response. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform
Teflon-lined dispensing tips for the Sygnis F-NIS direct-ink-writing (DIW) system — the internal PTFE lining resists clogging and keeps extrusion consistent, making them a strong choice for multi-phase pastes and materials carrying solid particles.
- ✓ PTFE-lined bore — anti-clog, smooth flow for filled pastes
- ✓ 0.25 mm color-coded tip · luer-lock fit · 25.4 mm length
- ✓ In US stock · sold in packs of 20 · ships in 2 business days
In stock
· 2 Business Days
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Automated support-removal station that dissolves PVA up to 4× faster than motionless water — magnetic rotor circulation, an illuminated tank, and a lift-out rinsing basket for hands-off post-processing.
- ✓ Up to 4× faster PVA removal — cuts operator time up to 80%
- ✓ 200 × 230 × 165 mm basket · 13.7 L illuminated tank with saturation indicator
- ✓ Genuine UltiMaker hardware — made to order, typical lead time 1–2 weeks
Made to order
· Made to order — typical lead time 1–2 weeks (confirmed at checkout)
The genuine Nexa3D Everlast-1 membrane keeps your XiP Pro producing consistent parts at industrial volume.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — even resin replenishment for repeatable parts, build after build
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
A fresh membrane on schedule is the cheapest insurance against downtime.
In stock
· 5–15 Business Days
Single heating resistance for the Zetasinter 4L furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Replacement alumina tube for the Zetasinter 4L debinding and sintering furnace.
- ✔ Direct replacement part for the Zetasinter 4L
- ✔ Genuine Zetamix by Nanoe component
- ✔ Shipped from California, invoiced in USD
In stock
· Ships from California · 10–20 business days
Replacement tool kit for the Nexa3D XiP — the hand tools Nexa3D supplies for everyday operation and maintenance, from part removal to routine upkeep. A handy set to replace lost tools or equip a second workstation.
- ✓ Genuine Nexa3D XiP hand-tool set
- ✓ For part removal and routine XiP maintenance
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is the difference between the slotted and solid build plate?
Which printer is it for, and is it genuine?
When should the build plate be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform direct, or talk to materials engineer