In stock
Nexa3D Resin Vat for XiP Pro – Replacement Vat Assembly
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
$1,930
Looking for Nexa3D resins? They are discontinued. See current replacements →
The resin vat holds resin over the XiP Pro’s light engine and carries the membrane every layer peels away from. It is a wear part: as the film clouds, scratches or dimples, prints start sticking and tearing. A fresh vat is one of the quickest ways to restore clean, consistent layers on a production printer.
Compatibility & Specifications
- Type: resin vat assembly (carries the peel membrane)
- Function: holds resin over the light engine; the print releases from its membrane
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro resin vat (XiPPro_VAT)
- Replace when: membrane is clouded, scratched, dimpled or leaking
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. A worn vat is a leading cause of failed layers, so a spare protects XiP Pro uptime. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Resin Vat for XiP Pro – Replacement Vat Assembly
Luer-lock tip caps for Sygnis F-NIS syringe barrels — an airtight seal so you can pre-fill, store and ship barrels without waste.
- Pack of 20 · $30
- One cap fits 10, 30 and 55 ml barrels
- Airtight luer-lock seal
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Print temperature-sensitive pastes on your Sygnis F-NIS 23151: the Heat Module warms a 10 ml cartridge to 60 °C and turns a Version B into a Version C.
- Heated 10 ml cartridge head, up to 60 °C
- Upgrades F-NIS Version B to Version C — self-installed
- 12-month Sygnis warranty · online setup support
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Eight-colour glaze kit for finishing parts printed in Zetamix Porcelain filament.
- ✔ Eight colours in one kit
- ✔ Made for parts printed and fired in Zetamix Porcelain
- ✔ Genuine Zetamix by Nanoe
In stock
· Ships from California · 10–20 business days
Replacement resin nozzle filters for the Nexa3D NXD, supplied as a 5-pack. They strain the resin as it moves through the automated delivery nozzles, catching debris before it reaches the vat. A cheap consumable that protects print quality.
- ✓ Nozzle filters for the NXD automated resin delivery, 5-pack
- ✓ Genuine Nexa3D consumable (P/N 11377)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Direct Pellet Extrusion (DPE) head for the 3DCeram M.A.T. — print ceramic & metal pellets at lower feedstock cost than filament.
- ✓ Screw Ø8 mm · 270 °C max · 0.8 mm nozzle
- ✓ Lower cost per part vs. filament, higher throughput
- ✓ Installs on your M.A.T. — US support & training
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Two-fluid DIW / robocasting head for the 3DCeram M.A.T. — mix two materials, print ceramic slurry or silicone.
- ✓ Mixing 1:1–5:1 · 2×55 mL · up to 6 bar
- ✓ Two-fluid or single-fluid · fine, complex geometries
- ✓ Customer-developed feedstock · installs on your M.A.T.
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Replacement outer vat container for the Nexa3D XiP Pro — the rigid tray that holds the resin vat and membrane assembly in place. A cracked or resin-fouled container compromises the seal and the vat above it; this genuine replacement drops straight back in.
- ✓ Rigid outer container for the XiP Pro resin vat assembly
- ✓ Direct fit for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer is this resin vat for?
How does the vat relate to the vat container and membrane?
When should the vat be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Resin Vat for XiP Pro – Replacement Vat Assembly direct, or talk to materials engineer