In stock
Nexa3D Solid Build Plate for XiP Pro – Replacement Print Platform
Solid replacement build plate for the Nexa3D XiP Pro. Its continuous flat surface gives a full-contact base for parts that need it. Swap a worn or warped plate to keep first-layer adhesion reliable across the build area.
- ✓ Solid, continuous machined platform
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
$779
Nexa3D offers the XiP Pro build platform in two styles, and this is the solid version — a continuous flat surface that gives parts a full-contact base. When a plate warps or stops holding prints, a fresh one restores dependable first-layer adhesion across the build area.
Compatibility & Specifications
- Type: solid build platform
- Benefit: continuous flat surface for a full-contact part base
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro solid build plate (XiPPro_BP_SOLID)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Not sure whether solid or slotted suits your parts? Ask our engineers — they run these machines. Sub-24-hour response. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Solid Build Plate for XiP Pro – Replacement Print Platform
Complete post-processing tool kit for Formlabs SLA 3D printers — sanding, grinding, polishing, and support-removal tools in one set (FT-F3-01).
- ✓ Pen sander, rotary tool + 28 bits, flush cutters, hobby knife, spray bottle, mat
- ✓ Curated to finish SLA parts faster and to a higher standard
- ✓ Genuine Formlabs kit — supported by Additive Plus
Made to order
· Currently on backorder — contact us for the latest lead time
Desktop 2-in-1 station that dries four filament spools and anneals printed parts up to 100°C — heat-radiation drying with feed-through ports so filament stays dry while you print.
- ✓ Dries four spools at once — feed-through ports keep filament dry mid-print
- ✓ Anneals printed parts up to 100°C to relieve internal stress and improve strength
- ✓ Preset filament profiles (PLA to PEEK/CF) auto-set the drying temperature
- ✓ Lead time: 2–3 weeks — ships to order
Made to order
· Lead time: 2–3 weeks — ships to order
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Genuine UltiMaker replacement print head for the S3 and S5 — a complete assembly with printhead cable, PCB, cooling fans, nozzle seal and clamp clips to restore print quality and cut downtime.
- ✓ OEM UltiMaker P/N 225661 (supersedes 219259) — fits S3, S5 & S5 Pro Bundle
- ✓ Complete unit: cable, PCB, fans, nozzle seal, clamp clips
- ✓ Genuine part — made to order, typical lead time 1–2 weeks
Made to order
· Made to order — typical lead time 1–2 weeks (confirmed at checkout)
The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.
- ✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
- ✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
- ✓ Feeds filament straight into the printer while sealed
Made to order
· Currently on backorder — contact us for lead time
Replacement tool kit for the Nexa3D NX Pro, NXD and NXE printers — the hand tools Nexa3D supplies for operating and maintaining the machine, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D hand-tool set for NX Pro / NXD / NXE
- ✓ For part removal and routine maintenance
- ✓ Genuine Nexa3D kit (P/N 11083) · ships in 2 business days
In stock
· 2 Business Days
Antistatic starter kit for Delfin vacuums with a 2-inch (50 mm) inlet: hose, wand, floor brush, nozzle and connectors in one box, so the vacuum is ready to clean on day one.
- ✓ Fits the Mistral 300 BL D2 and the Mistral 451 BL Inert
- ✓ 10 ft hose · double bend wand · 16.9 in floor brush · cone nozzle · connectors
- ✓ Genuine Delfin kit · ship date confirmed by email after you order
In stock
· Ship date confirmed by emailCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What is the difference between the solid and slotted build plate?
Which printer is it for, and is it genuine?
When should the build plate be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Solid Build Plate for XiP Pro – Replacement Print Platform direct, or talk to materials engineer