In stock
- Install, operator training, and compliance documentation
- Tailored warranty with same-week dispatch on critical issues
Delfin KT1006 Antistatic Accessory Kit for 2-in (50 mm) Vacuums – 10 ft Hose, Wand & Floor Brush
Antistatic starter kit for Delfin vacuums with a 2-inch (50 mm) inlet: hose, wand, floor brush, nozzle and connectors in one box, so the vacuum is ready to clean on day one.
- ✓ Fits the Mistral 300 BL D2 and the Mistral 451 BL Inert
- ✓ 10 ft hose · double bend wand · 16.9 in floor brush · cone nozzle · connectors
- ✓ Genuine Delfin kit · ship date confirmed by email after you order
$721
What your EHS lead actually checks
Metal-safe, compliant, documented
We handle reactive metal powder every day, so we spec vacuums that are ATEX-rated and combustible-dust certified for your material — with the compliance documentation your safety team needs. Install and training come from people who run powder handling in production.
An applications engineer on the line
Questions on combustible-dust ratings, HEPA capture, fume filtration, or reactive-metal handling? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
The Delfin KT1006 is the antistatic starter accessory kit for Delfin industrial vacuums with a 2-inch (50 mm) inlet, including the Mistral 300 BL D2 and the Mistral 451 BL Inert. It holds everything that turns the vacuum into a working cleaning system: a 50/40 mm galvanized-steel inlet connector, a 10 ft hose with cuffs, a double bend wand, a 16.9 in (430 mm) wheeled floor brush, a cone nozzle and a hose-to-tool connector. The Mistral 300 BL D2 ships without hose and tools, so most teams order KT1006 together with the vacuum.
Why teams add KT1006 to their Delfin vacuum
The vacuum moves the air. The kit decides what you can actually reach.
Everything to start, one part number
Connector, hose, wand, floor brush, nozzle and tool connector arrive together, so the vacuum is ready on day one, with no hunting for parts that fit.
Antistatic kit for an antistatic vacuum
Delfin lists KT1006 as its antistatic accessory kit, matched to the antistatic construction of its powder and dust vacuums.
2-inch inlet, lighter 40 mm tools
The 50/40 mm connector steps the vacuum inlet down to 40 mm tooling, which is lighter and easier to steer around a printer or a bench.
Floor and point pickup
The 16.9 in wheeled floor brush covers the floor around machines; the cone nozzle reaches corners, gaps and the machine base.
What’s in the kit
| Delfin part code | Part |
|---|---|
| SL.1382.0020 | Connector, 50/40 mm, galvanized steel (plugs into the vacuum inlet) |
| FH0027.40.10 | Hose, 10 ft, with cuffs |
| SL.0212.7016 | Double bend wand |
| TA.0438.0000 | Floor brush with wheels, 430 mm (16.9 in) |
| SL.0181.0000 | Cone nozzle |
| SL.0174.0000 | Connector, hose to tool |
Will it fit your vacuum?
Fit is set by one number: the diameter of the vacuum’s suction inlet.
2-inch (50 mm) inlet
Delfin vacuums with a 2-inch inlet, such as the Mistral 300 BL D2 and the Mistral 451 BL Inert.
3-inch (80 mm) inlet
Units with a 3-inch inlet, such as the Mistral 451 BL D2, take the 80/40 mm version of this kit (KT1006-0157). Ask us for it.
You need wet pickup or Div 2 tools
Delfin rates KT1006 for dry use and offers separate wet/dry and Class II Division 2 kits. Tell us the job and we match the kit.
Technical specifications
| Specification | KT1006 |
|---|---|
| Kit code | KT1006 |
| Kit type | Antistatic starter accessory kit |
| Vacuum inlet | 2 in (50 mm) |
| Tool diameter | 40 mm |
| Hose | 10 ft, with cuffs |
| Floor tool | Wheeled floor brush, 16.9 in (430 mm) |
| Use (per Delfin catalog) | Dry |
| Inlet connector | Galvanized steel |
| Compatible vacuums | Delfin units with a 2-in (50 mm) inlet, e.g. Mistral 300 BL D2, Mistral 451 BL Inert |
| Brand | Delfin |
Pair it with a vacuum
KT1006 is the kit for these 2-inch-inlet units.
Reactive metalsMistral 451 BL InertView vacuum →
All unitsIndustrial vacuumsBrowse →
Frequently asked questions
Does the Delfin Mistral 300 BL D2 come with a hose and tools?
No. The Mistral 300 BL D2 ships without hose and tools, which are sold separately. KT1006 is the kit that fits its 2-inch inlet: hose, wand, floor brush, nozzle and connectors.
Will KT1006 fit my vacuum?
It fits Delfin vacuums with a 2-inch (50 mm) suction inlet, such as the Mistral 300 BL D2 and the Mistral 451 BL Inert. Vacuums with a 3-inch (80 mm) inlet, such as the Mistral 451 BL D2, need the 80/40 mm version, KT1006-0157.
Can I use KT1006 for wet pickup?
Delfin’s catalog rates KT1006 for dry use. For wet or mixed pickup Delfin offers wet/dry kits such as KT1000; ask us and we confirm which one fits your vacuum.
Is KT1006 rated for Class II, Division 2 areas?
KT1006 is Delfin’s antistatic general accessory kit. Delfin offers a separate carbon-fiber overhead kit designed for Class II Division 2 applications. If your safety team requires Division 2-rated accessories, ask us before you order.
When will it ship?
We confirm the ship date by email after you order. If that date does not work for you, we cancel the order and refund it in full.
Can I buy a replacement hose or brush on its own?
Yes. Every part in the kit has its own Delfin part code (see the table above). Send us the code and quantity and we quote it.
Why source through Additive Plus
- We run powder handling in our own California shop, so we match the kit to your vacuum’s inlet and to the job, not to a catalog line.
- Genuine Delfin kit with US invoicing, purchase orders accepted, and spare parts by Delfin part code.
- One supplier for the whole setup: vacuum, kit, filters and spares from the same place.
| Brand | Delfin |
| Kit Code | KT1006 |
| Vacuum Inlet | 2 in (50 mm) |
| Tool Diameter | 40 mm |
| Hose | 10 ft, with cuffs |
| Floor Tool | Wheeled floor brush, 16.9 in (430 mm) |
| Use (per Delfin catalog) | Dry |
| Compatible Vacuums | Delfin units with 2-in (50 mm) inlet, e.g. Mistral 300 BL D2, Mistral 451 BL Inert |
We handle reactive metals daily. We'll spec it right.
Reactive alloy, fine PSD, or a specific ATEX zone? We match the vacuum and filtration to your powder and facility, with documentation for your EHS review. Typical turnaround under 24 hours.
Other products teams run alongside Delfin KT1006 Antistatic Accessory Kit for 2-in (50 mm) Vacuums – 10 ft Hose, Wand & Floor Brush
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
Made to order
· Made to order — typically ships in 1–2 weeks
Replacement activated-carbon air filters for the Nexa3D XiP Pro. They capture resin odour and VOCs from the printer's airflow, keeping the enclosure and production floor cleaner. Swap them on schedule to maintain filtration.
- ✓ Activated-carbon odour / VOC capture
- ✓ Sized for the Nexa3D XiP Pro (not the standard XiP)
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
High-airflow portable dust collector for production lines — 1589 CFM through an 8-inch inlet, capturing light chips and fine suspended dust at the source. Three-phase, IP55, 54 ft² Class M antistatic filter.
- ✓ Nearly 4× the airflow of the EV AP 420 — wide-area source capture
- ✓ Class M antistatic filtration for fine non-reactive dust · line-integrable
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
In stock
· 2 Business Days
Heavy-duty three-phase industrial vacuum for large quantities of solids, dust and liquids — 8.4 HP, 353 CFM, 3-inch inlet. Handles non-reactive metal powder recovery in AM and general plant clean-down.
- ✓ 32 ft² star filter, IP55 build, heavy steel chassis for continuous duty
- ✓ Non-reactive powder only — for reactive/combustible material, ask about an inert/ATEX unit
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
In stock
· 2 Business Days
Certified-HEPA (99.97% at 0.3 µm) large-capacity industrial dry vacuum — the 20-gallon PRO HEPA for silica, mold, lead and fine hazardous housekeeping dust. 2 HP, 20-gallon tank, 50-foot cord.
- ✓ Same individually tested & certified HEPA filter as the PRO HEPA 10, twice the tank
- ✓ General-purpose HEPA — for reactive metal or bulk combustible powder, ask us about an inert unit
- ✓ In US stock · ships in 2 business days · genuine Delfin unit
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
The genuine Nexa3D Everlast-1 membrane keeps your XiP Pro producing consistent parts at industrial volume.
- ✔ Rated 50,000+ layers (~20 L per membrane) — up to 25× the life of standard films
- ✔ Genuine Nexa3D OEM — even resin replenishment for repeatable parts, build after build
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
A fresh membrane on schedule is the cheapest insurance against downtime.
In stock
· 5–15 Business Days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business DaysPlace your order, or talk to an engineer first
Order Delfin KT1006 Antistatic Accessory Kit for 2-in (50 mm) Vacuums – 10 ft Hose, Wand & Floor Brush direct, or talk to materials engineer