Made to order
Formlabs Finishing Tools Kit for SLA 3D Printers – Post-Processing Set | FT-F3-01
Complete post-processing tool kit for Formlabs SLA 3D printers — sanding, grinding, polishing, and support-removal tools in one set (FT-F3-01).
- ✓ Pen sander, rotary tool + 28 bits, flush cutters, hobby knife, spray bottle, mat
- ✓ Curated to finish SLA parts faster and to a higher standard
- ✓ Genuine Formlabs kit — supported by Additive Plus
$299
Finish SLA parts faster
Everything for finishing in one kit
Pen sander, rotary tool with a 28-piece bit set, flush cutters, hobby knife, spray bottle, cloth, and a large silicone mat — curated to sand, grind, polish, and de-support Formlabs SLA parts without sourcing tools piecemeal.
Supported by Additive Plus
Genuine Formlabs kit, backed by engineers who run resin printing and post-processing daily. Sub-24h response, NDA standard.
Features
Maximize the full potential of your Formlabs SLA printer with the Formlabs Finishing Tools Kit — a complete tool kit for post-processing. Designed to reduce the time and effort required to finish your parts, it provides everything you need for a smooth, polished result.
Curated by experienced engineers and validated by customers, these finishing tools enhance surface finish, smooth planes and edges, and elevate overall appearance while driving down labor time and cost per part.
What’s in the kit
- Ergonomic Pen Sander: creates a uniform surface finish on flat and gently curved parts
- Rotary Tool: removes support marks and enlarges holes
- Rotary Tool Bit Kit — Grinding + Polishing Bits (16 pieces) and Buffing Bits (12 pieces)
- Flush Cutters: remove support tips
- Hobby Knife and Blades: precisely remove individual support tips
- Spray Bottle: dispenses IPA or water to remove dust, or mineral oil to polish surfaces
- Microfiber Cloth: cleans dust from sanded or polished parts
- Large Silicone Mat (16 × 24 in / 40 × 60 cm): protects work surfaces throughout finishing
Why Source Through Additive Plus
Additive Plus runs resin printing and post-processing in-house — order the genuine Formlabs kit from a partner who uses these tools, with a sub-24-hour response from our engineers. Ordering for a lab or need a purchase order? Contact us.
| Brand | Formlabs |
Other products teams run alongside Formlabs Finishing Tools Kit for SLA 3D Printers – Post-Processing Set | FT-F3-01
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Genuine removable build chamber for the Formlabs Fuse 1 SLS 3D printer — the modular powder chamber that holds the 165 × 165 × 300 mm build and transfers to the Fuse Sift for cooling and part recovery.
- ✓ Full 6.5 × 6.5 × 11.8 in / 165 × 165 × 300 mm build volume
- ✓ Swap chambers to keep printing while another cools and is unpacked
- ✓ Genuine Formlabs part BC-FS1-120V-01 — supported by Additive Plus
Made to order
· Currently on backorder — contact us for the latest lead time
Replacement resin nozzle filters for the Nexa3D NXD, supplied as a 5-pack. They strain the resin as it moves through the automated delivery nozzles, catching debris before it reaches the vat. A cheap consumable that protects print quality.
- ✓ Nozzle filters for the NXD automated resin delivery, 5-pack
- ✓ Genuine Nexa3D consumable (P/N 11377)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.
- ✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
- ✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
- ✓ Feeds filament straight into the printer while sealed
Made to order
· Currently on backorder — contact us for lead time
Eight-colour glaze kit for finishing parts printed in Zetamix Porcelain filament.
- ✔ Eight colours in one kit
- ✔ Made for parts printed and fired in Zetamix Porcelain
- ✔ Genuine Zetamix by Nanoe
In stock
· Ships from California · 10–20 business days
Electropolished stainless-steel dispensing tips for the Sygnis F-NIS direct-ink-writing (DIW) system — free of silicones and chlorides for sterile and fine work, with color-coded diameters from 0.20 to 1.50 mm for precise, consistent flow.
- ✓ Electropolished cannula — accurate, consistent extrusion
- ✓ Six color-coded bores 0.20–1.50 mm · luer-lock fit · 25.4 mm length
- ✓ In US stock · sold in packs of 20 · ships in 2 business days
In stock
· 2 Business Days
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
Made to order
· Made to order — typically ships in 1–2 weeksCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers is the Formlabs Finishing Tools Kit for?
What is included in the kit?
Is this a genuine Formlabs kit, and what is the lead time?
Place your order, or talk to an engineer first
Order Formlabs Finishing Tools Kit for SLA 3D Printers – Post-Processing Set | FT-F3-01 direct, or talk to materials engineer