Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
On backorder
With every unit
- Removable filament rack + metal annealing tray swap between drying and annealing modes
- Feed-through ports for print-while-drying routing
Accessories, Post-Processing Equipment · Filament Drying + Parts Annealing (Heat-Radiation)
goofoo FD01 PRO 2-in-1 Filament Dryer & 3D-Print Annealing Box – 4-Spool | Up to 100°C
Desktop 2-in-1 station that dries four filament spools and anneals printed parts up to 100°C — heat-radiation drying with feed-through ports so filament stays dry while you print.
- ✓ Dries four spools at once — feed-through ports keep filament dry mid-print
- ✓ Anneals printed parts up to 100°C to relieve internal stress and improve strength
- ✓ Preset filament profiles (PLA to PEEK/CF) auto-set the drying temperature
- ✓ Lead time: 2–3 weeks — ships to order
Price held 7 days after order.
Filament & printer compatibility checked
Ships to order · 2–3 week lead time
What your print room actually needs
What your print room actually needs
Two jobs, one heated box
The FD01 PRO dries four spools and feeds them to the printer through side ports, then anneals finished parts on a metal tray — moisture control and stress relief without a second machine or a second footprint on the bench.
An applications engineer on the line
Questions about drying presets, feed-through routing, or which parts anneal safely below 100 °C? Our engineers run these materials in-house. Sub-4h reply, NDA standard.
About this product
goofoo FD01 PRO is a desktop 2-in-1 station that dries up to four filament spools and anneals printed parts up to 100 °C. One heated chamber keeps feedstock dry before and during printing through feed-through ports, then relieves internal stress in finished parts — so moisture-sensitive filament and dimensionally critical parts get handled without a second machine.
Why engineers reach for the FD01 PRO
Drying and annealing in one glass-door chamber, sized for a workbench.
Four spools at once
Dries up to four 1 kg spools in one heated chamber — no single-roll bottleneck and no swapping mid-batch.
Dry while printing
Feed-through ports route filament straight to the printer, so it stays dry through long PA-CF, PC and PET-CF jobs.
Fast, even heat
Reaches 100 °C in about 3 minutes via a heat-radiation pipe that spreads temperature evenly across every spool.
Preset profiles + touch control
An LC touch screen with presets from PLA/CF to PEEK/CF auto-sets the drying temperature; rotary knobs set filament and time.
How the FD01 PRO runs
Three steps, whether you are drying feedstock or annealing a finished part.
Step 01
Load spools or parts
Place up to four spools on the removable filament rack, or swap in the metal tray to anneal printed parts.
Step 02
Select preset or temperature
Pick a filament preset or dial an annealing temperature on the touch screen, then set the 0–24 h timer.
Step 03
Dry or anneal
The heat-radiation pipe holds 55–100 °C evenly; feed-through ports let filament run to the printer as it dries.
What Is the FD01 PRO: Filament Drying and Parts Annealing in One Box
The FD01 PRO is a benchtop conditioning unit with a glass drop-down door, interior LED light, and a heat-radiation heating pipe. In dryer mode it holds up to four spools warm and dry, feeding filament through side ports to the printer so it never re-absorbs moisture. In annealing mode a metal tray replaces the filament rack, letting you heat-soak finished parts to relieve print stress. See full specifications below.
Filament Drying
Wet filament causes stringing, weak layer bonding and popping during extrusion. The FD01 PRO dries PLA, PLA+, PETG, WOOD, ABS, TPU, HIPS, PA, PA-CF, PA-GF and PC on both 1.75 mm and 2.85 mm spools, in 0.25 / 0.5 / 1 kg sizes, up to four 1 kg rolls (4 kg) at once. Preset profiles — PLA/CF, PETG/CF, TPU/PC, ABS/CF-GF, PET/CF, PAHT/CF, PPA/CF, PEEK/CF and more — set the drying temperature automatically for each material, and feed-through ports keep filament dry through the whole print.
3D-Print Annealing
Annealing heat-soaks a printed part to relieve internal stress locked in during printing, improving strength and dimensional stability. Swap the filament rack for the included metal baking tray, set a temperature up to 100 °C, and run a controlled soak on the 0–24 h timer. It suits stress relief on PLA, PETG and other thermoplastics whose annealing window sits at or below 100 °C.
Specifications
| Specification | FD01 PRO |
|---|---|
| Function | 2-in-1 filament dryer + 3D-print annealing box |
| Filament capacity | Up to four 1 kg spools (4 kg total) |
| Compatible diameter | 1.75 mm & 2.85 mm |
| Spool sizes | 0.25 / 0.5 / 1 kg |
| Heating mode | Heat-radiation pipe (even heating) |
| Heating range | 55–100 °C |
| Time to temperature | ~3 min to 100 °C |
| Timer | 0–24 h |
| Control | LC touch screen + rotary knobs, °C/°F toggle, interior LED |
| Power | AC 110V/220V, 50/60 Hz, 690 W, 3 A |
| Product size | 18.1 × 13.2 × 11.5 in / 460 × 335 × 291 mm |
| Weight | Net 10.6 lb (4.8 kg) · Gross 20.9 lb (9.5 kg) |
| Certification | FCC / CE / RoHS |
Where the FD01 PRO earns its bench space
Honest use cases across a mixed-material print room.
Functional prototyping
Dry PA-CF and PC before load-bearing parts
Engineering & tooling
Anneal jigs and fixtures for stability
Education & makerspaces
Shared drying for mixed filament stock
CF/GF composites
Keep fiber-filled filament moisture-free
Flexible materials
Condition TPU for clean, snap-free extrusion
Small-batch production
Overnight drying on the 0–24 h timer
Not sure the FD01 PRO is the right box?
Other drying and post-processing paths we carry.
Tell us which filaments you run and which printer feeds from the dryer — a materials engineer will confirm spool fit, feed-through routing and the right drying presets before you order. Sub-4h reply, NDA standard.
Why Source the FD01 PRO Through Additive Plus
- Compatibility checked against the filaments and printers we sell — we confirm spool fit and feed-through routing before you buy
- Drying-preset guidance for moisture-sensitive PA, CF/GF and PC feedstock from engineers who run these materials
- Ships to order with an honest 2–3 week lead time — no phantom in-stock claims
- <24h response · 15,000+ teams supported across 23 countries
| Brand | goofoo |
| Technology | Filament Drying + Parts Annealing (Heat-Radiation) |
| Material | ABS, HIPS, PA, PA-CF, PA-GF, PLA, PLA+, TPU, WOOD, PC, PETG |
| Temperature range | 55–100 °C (131–212 °F) |
| Power Requirements | AC 110V/220V · 50/60 Hz · 690 W · 3 A |
| Dimensions | 18.1 × 13.2 × 11.5 in / 460 × 335 × 291 mm |
| Weight | Net 10.6 lb (4.8 kg) · Gross 20.9 lb (9.5 kg) |
| Certification | CE, FCC, ROHS |
| Country of origin | China |
| Filament Capacity | Up to four 1 kg spools (4 kg total) |
| Compatible Diameter | 1.75 mm & 2.85 mm |
| Spool Sizes | 0.25 / 0.5 / 1 kg |
| Heating Mode | Heat-radiation pipe |
| Time to Temperature | ~3 min to 100 °C |
| Timer | 0–24 h |
| Control | LC touch screen + rotary knobs, °C/°F toggle, interior LED |
Running nylon, PC or CF filament?
These absorb moisture fastest. Tell us your filaments and printer and we'll confirm spool fit, feed-through routing and the right drying presets before you order.
Other products teams run alongside goofoo FD01 PRO 2-in-1 Filament Dryer & 3D-Print Annealing Box – 4-Spool | Up to 100°C
Accessories
Polymaker PolyBox Edition II – High-Quality 3D Printer Filament Dry Box
3D Printer Filament Dry Box for Optimal Storage
From $69
Add to cart
On backorder
Accessories
Nexa3D XiP Toolkit
Each XiP printer comes with an amazing toolkit, but, in case you need an extra set of tools, the toolkit is also sold separately.
- Wash Bucket with Basket - to manually wash parts (compatible with the Wash+Cure as a two-stage process)
- Rolled Mat - create a work surface anywhere
- Snips - to remove supports
- Scraper - to clean the membrane
- Spatula - to remove parts from the build plate
- Metal File, Flat - to file away support nubs
- Metal File, Half-round - to file away support nubs
- Cleaning Tool - to be used when auto-cleaning your membrane
- Funnel - to put resin back into the cartridge
- Filter - to remove partially cured resin from the vat
- Gloves - to stay safe and clean
- Tray - to contain your work while moving around the office
From $132
Add to cart
In stock
Post-Processing Equipment · Cleaning
AM Solutions C1 Max — Automated IPA-Free Cleaning System for Large SLA Parts
Automated cleaning system for large SLA 3D-printed parts and build platforms — a compound immersion process that cleans and loosens supports without IPA or critical solvents.
- ✓ IPA-free cleaning of large SLA parts up to 750 × 750 × 550 mm
- ✓ Auto-cleans the build platform · loosens supports for easy removal
- ✓ Lead time: 6–10 weeks — built & configured to order
From $95700
Add to cart
On backorder
· Lead time: 6–10 weeks — built & configured to order. Install and operator training included.
Post-Processing Equipment · Support removal
AM Solutions C1 — Automated Support & Resin Removal System (Benchtop)
Benchtop automated system that removes support structures and cleans uncured resin from delicate photopolymer 3D-printed parts — a compound dip process with no IPA or critical solvents.
- ✓ Automated support removal + cleaning for SLA / DLP / PolyJet parts
- ✓ IPA-free compound · 230 V plug-and-play benchtop
- ✓ Lead time: 5–8 weeks — built to order · install + training included
From $31970
Add to cart
On backorder
· Lead time: 5–8 weeks — built to order. Install and operator training included.
Accessories
Nexa3D Resin Vat for XiP
XiP's resin vat is a revolutionary two-piece assembly of a rigid aluminum frame and a replaceable Everlast-2 membrane that lock together with a Tupperware-like clamping mechanism and connect to the XiP printer via an electro-magnetic alignment system. Switching materials or membranes has never been easier!
By replacing just the membrane, as needed, the vat system dramatically lowers operating costs and waste.
[NOTE: Each resin vat comes with one (1) Everlast-2 membrane included.]
From $543
Add to cart
In stock
Media blasting · Surface finishing
AM Solutions M4 Basic Vibratory Finishing System – Automated Post-Processing for Metal & Plastic Parts
Entry-level automated vibratory (mass) finishing system for small 3D-printed metal and plastic parts up to 70×70×25 mm — 20 L work container, integrated 25 L closed-loop process-water tank, plug-and-play 230 V. Smoothing, deburring, polishing, and matt finishing for SLA, SLS, MJF, HSS, SAF, and SLM parts.
- ✓ Automated vibratory finishing — smoothing, deburring, polishing, and matt finish in one cycle
- ✓ Closed-loop 25 L process water — separates solids, no drain or fresh-water hookup, low running cost
- ✓ Lead time: typically 4–6 weeks — configured to order, installed and supported from California
From $20560
Add to cart
On backorder
· 4-6 weeksFrom print rooms running the FD01 PRO
Unedited feedback from teams drying and annealing every day.
★★★★★
Our PA-CF stopped stringing overnight — drying four spools at once means the whole shelf is print-ready in the morning.
DR
Daniel R. Production Lead · Industrial 3D printing
★★★★★
Feed-through ports were the selling point. A 14-hour PC job used to fail on humidity; now it runs dry start to finish.
PS
Priya S. R&D Engineer · Consumer products
★★★★★
The annealing tray is a nice second use — PLA fixtures hold tolerance better after a soak. One box, two problems solved.
MB
Marco B. Prototyping Manager · Automotive
Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What drying temperature does the FD01 PRO use for each filament?
The FD01 PRO ships with preset filament profiles — PLA/CF, PETG/CF, TPU/PC, ABS/CF-GF, PET/CF, PAHT/CF, PPA/CF, PEEK/CF and more — and the LC touch screen auto-sets the drying temperature when you pick the material. The heating range runs 55–100 °C, so lower-temperature materials like PLA and TPU dry gently while nylon, PC and carbon-fiber blends get the higher end. You can also set a custom temperature and time manually on the FD01 PRO.
Can the FD01 PRO dry and feed filament while I'm printing?
Yes. The FD01 PRO has feed-through ports that route filament straight to your printer, so the spool stays inside the heated chamber and keeps drying through the entire print. This matters most on long jobs with moisture-sensitive materials like PA-CF, PC and PET-CF, where filament left in open air re-absorbs humidity within hours. Route the filament through the port before you start the print and the FD01 PRO holds temperature on the 0–24 h timer.
Which materials can I anneal, and how does annealing help?
Annealing heat-soaks a finished part to relieve internal stress locked in during printing, which improves strength and dimensional stability. Because the FD01 PRO tops out at 100 °C, it suits stress relief on thermoplastics whose annealing window sits at or below that — PLA, PETG and similar materials. Swap the filament rack for the included metal tray, set the temperature and the 0–24 h timer, and run a controlled soak. Materials that need annealing well above 100 °C fall outside its range.
What is the largest spool the FD01 PRO holds, and how many at once?
The FD01 PRO holds up to four spools at the same time and accepts 0.25 kg, 0.5 kg and 1 kg spools in both 1.75 mm and 2.85 mm diameters. Fully loaded that is four 1 kg rolls, or 4 kg of filament drying together in one chamber. The removable filament rack organizes the spools and lifts out entirely when you switch the FD01 PRO to annealing mode.
Does the FD01 PRO support PEEK or carbon-fiber filament?
The FD01 PRO includes a PEEK/CF preset and profiles for carbon- and glass-fiber blends such as PA-CF, PA-GF, ABS/CF-GF, PET/CF, PAHT/CF and PPA/CF, and it dries PC as well. Note that the FD01 PRO dries and conditions these filaments up to 100 °C — that keeps them moisture-free for printing, but it is a drying and annealing unit, not a high-temperature curing oven. For exact preset behavior on your specific PEEK grade, ask our materials engineer.
What power does the FD01 PRO need?
The FD01 PRO runs on AC 110V/220V at 50/60 Hz, drawing 690 W and about 3 A. It plugs into a standard wall outlet — no special electrical service required — and reaches 100 °C in roughly three minutes thanks to its heat-radiation heating pipe. The FD01 PRO is certified to FCC, CE and RoHS.
What warranty comes with the FD01 PRO?
Warranty length is not published on the FD01 PRO product sheet, so we don't state a term we can't verify. Contact Additive Plus for current warranty coverage and support terms before you order, and we'll confirm what applies to your unit. Every FD01 PRO order also ships with compatibility support so the dryer matches your filaments and printer from day one.
Place your order, or talk to an engineer first
Order goofoo FD01 PRO 2-in-1 Filament Dryer & 3D-Print Annealing Box – 4-Spool | Up to 100°C direct, or talk to materials engineer