Made to order
- Lot-matched resin sealed and batch-traceable for repeatable prints
- Validated LSPc profile exposure and cure settings for your Nexa3D printer
Nexa3D xMED412 Medical-Grade Resin – Polypropylene-Like Photopolymer for NXE 400 | 5 kg
$1,750
What your process engineer actually checks
Certification scope, stated precisely
xMED412 is entirely based on Henkel LOCTITE 3D MED412 and is covered by its associated clearances, tests and certifications. It is capable of meeting ISO 10993-5, -10 and -23 for biocompatibility when processed using a validated workflow, and it has been tested and cleared for production of nasopharyngeal swabs complying with ISO 10993 testing and FDA Class I exempt classification. Certificates of compliance are available on request. Scope is Class I and II medical devices and medical equipment components. Final device compliance depends on your own validated workflow and device qualification — Additive Plus and Nexa3D supply certificates of compliance, not device clearance for your product.
A materials engineer on the line
Questions on cure settings, finishing or switching from another resin? Our engineers run Nexa3D LSPc resins in-house. Sub-4h reply, NDA standard.
Nexa3D xMED412 is a medical-grade, polypropylene-like LSPc photopolymer for the NXE 400 and NXE 400 Pro, printing tough parts at 141% elongation at break and 42.6 J/m notched Izod. It is entirely based on Henkel LOCTITE 3D MED412 and is covered by its associated clearances, tests and certifications, and is capable of meeting ISO 10993-5, -10 and -23 for biocompatibility when processed using a validated workflow.
Why engineers choose xMED412
Polypropylene-like toughness with a documented certification trail — the two things a medical program actually needs from a resin.
141% elongation at break
Parts flex, snap-fit and survive drops instead of shattering. 42.6 J/m notched Izod and 70–75 D Shore hardness give living hinges and clip features real service life.
ISO 10993-5, -10 and -23 capable
Entirely based on Henkel LOCTITE 3D MED412 and covered by its associated clearances, tests and certifications. Capable of meeting ISO 10993-5, -10 and -23 for biocompatibility when processed using a validated workflow. Certificates of compliance available on request.
405 nm LSPc on NXE 400
Formulated for Nexa3D’s Lubricant Sublayer Photo-curing process, so full build platforms cure in one pass rather than point by point. Supplied in 5 kg jerricans with a validated exposure and cure profile.
Autoclavable and machinable
Parts can be autoclaved, machined, tapped or polished to a clear finish. 38 MPa tensile, 0.36% water absorption, inherently insulating and resistant to moisture and vibration. All parts require post-processing and cleaning per Nexa3D’s recommendations.
How we supply xMED412
From Henkel chemistry to a cured, cleaned part on your bench.
Formulated & tested
Built entirely on Henkel LOCTITE 3D MED412 chemistry and covered by its associated clearances, tests and certifications. Tested and cleared for production of nasopharyngeal swabs complying with ISO 10993 testing and FDA Class I exempt classification.
Stocked & lot-matched
Supplied to order in sealed 5 kg jerricans with lot traceability, so a qualified batch can be repeated. Certificates of compliance available on request for your device file.
Print, wash & cure
Print at 405 nm on the NXE 400 or NXE 400 Pro using the validated exposure profile, then wash, dry and UV post-cure. Parts require post-processing and cleaning per Nexa3D’s recommendations before use.
Physical and mechanical properties
| Property | Method | Value |
|---|---|---|
| Tensile strength | ASTM D638 | 38 MPa |
| Young’s modulus | ASTM D638 | 1245 MPa |
| Elongation at break | ASTM D638 | 141% |
| Flexural strength | ASTM D790 | 37.6 MPa |
| Flexural modulus | ASTM D790 | 1022 MPa |
| Notched Izod impact | ASTM D256 | 42.6 J/m |
| Shore hardness | ASTM D2240 | 70–75 D |
| HDT @ 0.455 MPa | ASTM D648 | 40 °C |
| Water absorption | ASTM D570 | 0.36% |
The figures above are Nexa3D LSPc values measured on the NXE 400 workflow. The Henkel LOCTITE 3D MED412 data sheet reports roughly 105–115% elongation at break on its own validated DLP workflow, so mechanical figures are workflow-dependent. Printed properties depend on part geometry, orientation and post-cure. Values are typical, not a specification.
Typical applications
Vendor-stated use cases for xMED412, within Class I and II medical devices and medical equipment components.
Compatible printers & post-processing
xMED412 runs on the Nexa3D NXE 400 and NXE 400 Pro at 405 nm using Nexa3D’s LSPc process, and ships as a 5 kg jerrican of translucent liquid photopolymer. Print with the validated exposure profile, then wash, dry and UV post-cure. Parts require post-processing and cleaning per Nexa3D’s recommendations, after which they can be autoclaved, machined, tapped or polished to a clear finish. The material is intended for Class I and II medical devices and medical equipment components. Final device compliance depends on your own validated workflow and device qualification: Additive Plus and Nexa3D supply certificates of compliance on request, not device clearance for your product.
Not sure xMED412 is the right resin?
If your parts are not medical or wearable, a general-purpose or rigid engineering resin is usually the cheaper answer.
Why source xMED412 through Additive Plus
- Genuine Nexa3D xMED412 — supplied to order in sealed 5 kg jerricans with lot traceability.
- Certificates of compliance available on request, plus the Instructions For Use that define the validated processing route.
- Materials engineers who run Nexa3D LSPc resins in-house — sub-4h reply, NDA standard.
- Volume pricing and official purchase orders supported for production accounts.
Downloads
| Brand | Nexa3D |
| Available colors | Translucent |
| Weight | 5 kg |
| Country of origin | USA |
| Printing Materials | Resins |
| Technology | LSPc |
| Package | 5 kg jerrican |
| Material form | Liquid photopolymer resin |
| Printer | NXE 400, NXE 400 Pro |
| Tensile Strength | 38 MPa |
| Tensile Modulus (MPa) | 1245 MPa |
| Elongation at Break (%) | 141% |
| Shore Hardness (3s) | 70–75 D |
| [email protected] MPA (°C) | 40 °C |
| Water Absorption (24hr) % | 0.36% |
| Flexural Strength (MPA) | 37.6 MPa |
| Flexural Modulus (MPa) | 1022 MPa |
| IZOD Impact (Notched, J/m) | 42.6 J/m |
| Resin Type | Medical |
| Application | Dental, Engineering, Manufacturing, Medical |
Product videos
We stock the full Nexa3D LSPc resin line and support official purchase orders and volume pricing. Tell us your printer and monthly volume and we'll match the right resin and quantity.
Other products teams run alongside Nexa3D xMED412 Medical-Grade Resin – Polypropylene-Like Photopolymer for NXE 400 | 5 kg
Implant-grade. Biocompatible. Wear-resistant. Genuine Carpenter PowderRange® CCM cobalt-chrome (CoCrMo, ASTM F75) for LPBF, EBM & DED metal 3D printing.
- ✓ VIM-melted, nitrogen gas-atomized — COA on request
- ✓ Excellent biocompatibility & non-magnetic (MRI-safe)
- ✓ Sold in small, workable volumes · in US stock, ready to ship
In stock
· In US stock · ready to ship
Dynamism PVA 2.85mm water-soluble support filament for dual-extrusion FDM — dissolves cleanly in plain water to release complex geometries, internal channels, and deep overhangs, with strong adhesion to PLA, nylon, TPU, PVB, and PETG.
- ✓ Dissolves in plain water — no solvents, no scarring
- ✓ Bonds to PLA, nylon, TPU, PVB & PETG (dual-extrusion)
- ✓ 2.85mm · 1kg · sealed with desiccant
Made to order
· On backorder — contact us for current lead time.
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
Medium-soft, single-component LSPc elastomer manufactured with Henkel LOCTITE — cures rubber-like for seals, grips, lattices and rubber-like production parts on Nexa3D printers.
- ✔ 55 Shore A with 159% elongation at break and 11.7 kN/m tear strength
- ✔ 5 kg bottle for NXE 400 / 400Pro and XiP — validated LSPc print profile included
- ✔ Water post-cure workflow, solvent-resistant, available on request (not in stock)
Out of stock
· Not in stock — available on request
KeyModel Ultra is a fast, dimensionally stable resin for dental and orthodontic models — ivory shade, crisp margins.
- ✓ Built for accurate dental and orthodontic models with sharp detail and stable dimensions
- ✓ High print speed for high-volume lab throughput on Nexa3D NXE-series printers
- ✓ Genuine Nexa3D resin · Ivory · 1 kg · ships from US stock in 2 business days
In stock
· 2 Business Days
- ✔ High toughness and flexural strength, wear- and corrosion-resistant
- ✔ Print → debind → sinter to dense zirconia on a desktop FFF machine
- ✔ Genuine Zetamix by Nanoe · 500 g spool · lead time 10–20 business days (depending on order queue)
In stock
Easy-to-print DLP/LCD/mSLA resin with an HDT-B of 272 °C, superior chemical resistance and — unlike most high-temp resins — real toughness instead of brittleness.
- ✓ HDT-B 272 °C · Tg > 300 °C — holds geometry under sustained heat
- ✓ Tough, not brittle — drill, grind and machine without shattering
- ✓ Superior chemical resistance · cytotoxicity passed (ISO 10993)
- ✓ A similar alternative to Loctite IND147 for the same high-temp applications
Made to order
· Ships in <10 business days
Precise, flexible resin for orthodontic indirect bonding trays — now for the XiP.
- ✓ Sets brackets accurately, then flexes for easy, non-stick release
- ✓ Biocompatible resin purpose-built for IBT workflows
- ✓ 1 kg cartridge for Nexa3D XiP and XiP Pro (LSPc)
In stock
· 2 Business Days
Print dense alumina (Al₂O₃) ceramic parts on 3DCeram's M.A.T. FFF platform, then debind and sinter to a technical-ceramic component.
- ✔ 295 MPa average flexural strength, 213 GPa elastic modulus and 3.9 g/cc after solid-state sintering at 1650°C
- ✔ Debind and sinter parameters plus the full datasheet included with every spool
- ✔ 1.75mm ceramic feedstock for the 3DCeram M.A.T. FFF head — mutual NDA before any spec review
In stock
· In stock — ships in 1–2 business days. Custom alloy or ceramic feedstock: 3–4 weeks, configured to order.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printers run Nexa3D xMED412?
What colors and pack sizes does xMED412 come in?
What post-processing does xMED412 need?
What is xMED412 best used for?
How should xMED412 be stored and handled?
Is xMED412 certified biocompatible?
Can xMED412 parts be sterilized, and can I test the resin before buying volume?
Place your order, or talk to an engineer first
Order Nexa3D xMED412 Medical-Grade Resin – Polypropylene-Like Photopolymer for NXE 400 | 5 kg direct, or talk to materials engineer