In stock
- Install, operator training, and validated molding parameters
- Tailored warranty with same-week dispatch on critical issues
Cyclic Olefin Copolymer 8007S Pellets - 2 lbs
$120
What your process engineer actually checks
From printed prototype to molded part
We use injection molding to bridge our own printed prototypes into short runs, so install includes validated parameters for your resin and tooling guidance. The team that trains you actually molds parts — not a distributor reading a manual.
An applications engineer on the line
Questions on tooling, shot size, cycle times, or pellet selection? A named applications engineer answers directly. Most replies in under 4 hours, NDA standard.
TOPAS 8007S-04 is a general-purpose, glass-clear cyclic olefin copolymer (COC) specifically designed for injection molding. Its exceptional combination of purity, clarity, and chemical resistance makes it a premier material choice for demanding healthcare, diagnostic, and high-tech applications where leachables, extractables, and product integrity are critical.
Key Attributes & Value Proposition
- Ultra-High Purity: Extremely low leachables and extractables ensure content stability and prevent interaction with sensitive pharmaceuticals or chemicals.
- Superior Moisture Barrier: Very low water vapor transmission rate (WVTR) protects moisture-sensitive contents.
- Exceptional Clarity: Glass-like transparency with low birefringence, ideal for optical applications and visual inspection.
- Inert & Non-Polar Surface: Minimizes protein binding, adsorption, denaturation, and precipitation—superior to glass in many bio-applications.
- Broad Chemical Resistance: Resistant to alcohols, acetone, acrylates, and acids.
- Sterilizability: Can withstand standard sterilization methods, including Ethylene Oxide (EtO) and gamma radiation.
- Regulatory Compliance: Free of BPA, phthalates, and halogens. Complies with FDA, EU regulations, and holds a Drug Master File (DMF 12132).
Target Applications
- Medical & Diagnostic: Prefilled syringes, vials, cartridges, IV components, surgical instruments, labware.
- Packaging: High-barrier bottles, tubes, and food packaging.
- Technical & Optical: Lenses, light guides, electronics, and components requiring high clarity and dimensional stability.
| Brand | APSX |
| Country of origin | USA |
| Platform | FIM |
| Solid Density g/cm3 | 1.01 |
| Tensile Modulus (MPa) | 2620 |
| Tensile Stress at Yield (MPa) | 62.7 |
| Material | COC |
| Reinforcement | Unfilled |
| Application | Engineering, Manufacturing |
| Technology | PIM (Plastic Injection Molding) |
We mold our own. Tooling and trials on request.
Need a mold built, an insert cut, or a trial run before committing? We can produce tooling and run sample shots on the actual machine so you see molded parts first. Typical tooling lead 2–4 weeks.
Other products teams run alongside Cyclic Olefin Copolymer 8007S Pellets - 2 lbs
Nexa3D xMODEL15-Gray is an economical 405 nm LSPc photopolymer for fast, high-detail concept and appearance models — 55 MPa tensile, 78–80 Shore D, with a neutral gray finish that reads surface detail in design reviews.
- ✓ High detail and a paintable, plate-ready finish
- ✓ Runs on Nexa3D XiP, XiP Pro and NXE 400 / NXE 400 Pro — 405 nm LSPc
- ✓ In US stock — ships in 2 business days, lot-matched for repeatable prints
In stock
· 2 Business Days
Currently not in stock. Leave a request and we will confirm availability, price and lead time.
Medium-soft, single-component LSPc elastomer manufactured with Henkel LOCTITE — cures rubber-like for seals, grips, lattices and rubber-like production parts on the Nexa3D XiP.
- ✔ 55 Shore A with 159% elongation at break and 11.7 kN/m tear strength
- ✔ 1.5 kg format for XiP and XiP Pro — validated LSPc print profile included
- ✔ Water post-cure workflow, solvent-resistant, available on request (not in stock)
Out of stock
· Not in stock — available on request
xPRO410 is a rigid, general-purpose LSPc photopolymer built on Henkel Loctite® PRO410 chemistry — extreme accuracy and an exceptional surface finish, optimized for the Nexa3D NXE 400 at up to 8 L/hour.
- ✓ Rigid general-purpose resin — 41 MPa tensile, Shore D 79
- ✓ Dimensional accuracy within 0.2% after xCURE post-cure
- ✓ 5 kg container for NXE 400 / 400Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
Easy-to-print all-round industrial resin with excellent rigidity, an HDT of 122 °C and outstanding chemical resistance — for functional prototypes and demanding industrial parts.
- ✓ 92 MPa tensile · 3600 MPa modulus · HDT-B 122 °C — stiff and heat-stable
- ✓ Outstanding chemical resistance (<1% mass gain) & 0.3% water uptake
- ✓ Post-machinable (drill, grind); long-term thermal stability
- ✓ A cost-effective alternative to Loctite IND249 High Temp
Made to order
· Ships in <10 business days
Print dense alumina (Al₂O₃) parts on 3DCeram's Ceramaker laser-SLA platform, then debind and sinter to a hard, electrically insulating technical ceramic.
- ✓ 397 MPa 4-point bending strength at >3.9 g/cc, 16.4 GPa Vickers hardness after sintering
- ✓ Debind and sinter parameters plus the full datasheet included with every order
- ✓ Ceramic SLA paste for the 3DCeram Ceramaker platform — quote-based, mutual NDA before spec review
In stock
· In stock — ships in 1–2 business days. Custom ceramic formulations and larger batches: 2–4 weeks, configured to order.
In stock
· Express 2–3 wks · Standard 6–8 wks
CNPC 18Ni300 Maraging Steel powder for LPBF — made by CNPC Powder, 15–53 µm, sold in 10 kg containers.
- Certificate of analysis (COA) for the lot, on request
Manufacturer: CNPC Powder
Made to order
· Ship date confirmed after you order
In stock
· 2 Business DaysPlace your order, or talk to an engineer first
Order Cyclic Olefin Copolymer 8007S Pellets - 2 lbs direct, or talk to materials engineer