Made to order
- Install, operator training, and validated process settings
- Tailored warranty with same-week dispatch on critical issues
Zetasinter 4L — Tubular Debinding & Sintering Furnace
Zetasinter 4L is a tubular furnace for sintering printed metal parts under controlled atmosphere.
- ✔ Sinters under argon or argon and hydrogen — the atmosphere metal parts need
- ✔ Sized for prototyping and small production runs, not for a service bureau queue
- ✔ Runs on 220 V, 6 kW — no plant-level power supply required
Freight and installation requirements confirmed with you before the order is placed.
$40,520
What to confirm before installation
A metal furnace, not a ceramic one
Zetasinter 4L is a tubular furnace that sinters printed metal parts under controlled atmosphere. It runs H13, 316L and 17-4 PH to 1350 °C under argon or an argon-hydrogen mix, on a 4-litre capacity and 220 V, 6 kW supply. It sits between prototyping and small production runs, keeping the whole print-debind-sinter chain on your own bench.
We confirm your setup first
The 4L needs a gas supply and a fume hood is recommended. Before you order, we confirm the argon or argon-hydrogen supply, the fume hood and the furnace cycle with the manufacturer, so the unit that arrives matches your bench and your power. Freight and install are confirmed at quotation, not estimated by memory.
Zetasinter 4L is a tubular furnace for sintering printed metal parts under controlled atmosphere. It takes H13, 316L and 17-4 PH straight from the Zetamix print-debind-sinter workflow, so the whole chain stays on your own bench.
Why this furnace
Controlled-atmosphere metal sintering at bench scale, on a standard power supply.
Sinters under argon or argon and hydrogen — the atmosphere metal parts need.
Sized for prototyping and small production runs, not for a service bureau queue.
Runs on 220 V, 6 kW — no plant-level power supply required.
Takes H13, 316L and 17-4 PH straight from the Zetamix print-debind-sinter workflow.
Order, install and run
Plan the gas supply and extraction before the furnace arrives.
Quote and freight
Delivered price is confirmed at quotation — freight on a furnace depends on crate size and destination.
Install
A fume hood is recommended and it runs on argon or an argon-hydrogen mix, so plan the gas supply before installation. Manufacturer training at your site is a separate option.
Sinter
Sinter H13, 316L and 17-4 PH under argon or argon + hydrogen up to 1350 °C.
Materials it sinters
Straight from the Zetamix metal print-debind-sinter workflow.
Specifications
- Process: sintering of metal parts under controlled atmosphere
- Materials: H13, 316L, 17-4 PH
- Maximum temperature: 1350 °C under argon or argon + hydrogen
- Capacity: 4 litres
- Tube diameter: 140 mm ID
- Tube length: 150 cm total, 30 cm of controlled temperature at ±10 °C
- Power: 6 kW, 220 V
- Dimensions (L×W×H): 170 × 110 × 130 cm
- Weight: 200 kg
- Fume hood installation recommended
What you get and how you buy
- Genuine Zetamix by Nanoe, supplied and invoiced from California in USD
- Operating manual and furnace cycle guide from the manufacturer
- Manufacturer training at your site available as a separate option
- Delivered price confirmed at quotation — freight on a furnace depends on crate size and destination
Before you order
A fume hood is recommended, and the furnace runs on argon or an argon-hydrogen mix — plan the gas supply before installation. Training at your site is available from the manufacturer as a separate option. This is a metal furnace working under inert gas; to sinter printed ceramic parts in ambient air instead, see the Zetasinter Chamber (15 L).
| Equipment type | Debinding & sintering furnace |
| Brand | Zetamix by Nanoe |
We run the whole back end. Custom workflows on request.
Tighter surface spec, a specific heat-treat cycle, or an integrated depowder-to-finish line? We configure post-processing around your parts and can run the finishing as a service while you evaluate.
Other products teams run alongside Zetasinter 4L — Tubular Debinding & Sintering Furnace
General purpose translucent photopolymer for the Nexa3D NXE 400 and NXE 400 Pro. Combines 30–60 MPa ultimate tensile strength, 84–88 D Shore hardness and 59–61 °C HDT at 0.45 MPa with low shrinkage, high accuracy and fast LSPc print speed. The translucent finish makes it the practical choice for air ducts, manifolds and fluid-flow models where you need to see inside the part, and it holds up in snap-fit and functional end-use work. Water absorption is 0.4% to ASTM D570. Supplied to order in 5 kg (12 lb) jerricans.
Made to order
· Contact for lead time
September special: $448 (regular $527.40) — valid through September 30, 2026. Wash and cure station for post-processing parts printed on the Nexa3D XiP. Ordered on demand — availability and lead time are confirmed at order. This SKU is being discontinued by the supplier, so the offer runs while supplier stock lasts.
Made to order
Stiff, biocompatible (Class I) resin for accurate dental and implant surgical guides.
- ✓ Rigid and durable to hold drill paths under guided surgery
- ✓ Class I biocompatible resin designed for surgical guides
- ✓ 1 kg cartridge for Nexa3D XiP and XiP Pro (LSPc)
In stock
· 2 Business Days
Light-curing filled composite for permanent crowns, inlays, onlays, veneers and denture teeth — bright B1 shade, validated on Nexa3D LSPc.
- ✓ Permanent indication: flexural strength > 130 MPa (ISO 4049), E-modulus > 4000 MPa
- ✓ One-phase esthetics — pre-matched B1 opacity, no layering; biocompatible after UV post-cure
- ✓ 0.5 kg ready-to-use bottle, zero pre-mixing · ships in 1–2 business days
In stock
· 1–2 Business Days
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 4.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 4.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
xPEEK147 is a high-temperature LSPc photopolymer in the performance range of PEEK — very high stiffness, 80 MPa tensile strength and heat deflection up to 230°C after a thermal post-cure.
- ✓ Heat deflection up to 230°C (0.45 MPa) after the 170°C bake
- ✓ PEEK-range stiffness — 3220 MPa modulus, Shore D 94
- ✓ 5 kg container for NXE 400 / 400Pro (405 nm LSPc)
- ✓ In stock — ships in 1–2 business days from US inventory
In stock
· In stock — ships in 1–2 business days from US inventory.
Print radiofrequency parts directly — no debinding, no sintering. A dielectric filament with permittivity 7.5 and low loss, so antennas, lenses and metasurfaces come off the printer ready to test.
- ✔ Permittivity 7.5 · loss tangent 0.001 · HDT up to 110 °C
- ✔ No debinding, no sintering — prints as a technical polymer, parts up to 80 cm
- ✔ Genuine Zetamix by Nanoe · 500 g spool, vacuum packed · 1.75 mm
In stock
· Ships from California · 10–20 business days
In stock
· In stock — ships in 1–2 business days from our Los Angeles warehouse.Common questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
What materials and atmosphere does the Zetasinter 4L run?
What temperature and capacity does the Zetasinter 4L reach?
What power and utilities does the Zetasinter 4L need?
What are the install requirements and lead time for the Zetasinter 4L?
Place your order, or talk to an engineer first
Order Zetasinter 4L — Tubular Debinding & Sintering Furnace direct, or talk to materials engineer