Made to order

With every system

Install, operator training, and validated process settings
Tailored warranty with same-week dispatch on critical issues

Engineering, Manufacturing, Other Equipment, Post-Processing Equipment

Zetasinter Porcelain — 54 L Firing Oven

Zetasinter Porcelain is an electric oven for firing printed porcelain pieces.

✔ 54 litres — fire multiple pieces in a single run
✔ Fully configurable temperature programmer with several heating modes
✔ Runs on 230 V at 4.5 kW, light enough at 95 kg for a normal workshop

Freight and installation requirements confirmed with you before the order is placed.

$7,400

Prices follow supplier cost and stock availability and are updated regularly. The price you see is today's price — once you order, it's held for 7 days.

Install + training included Tailored service plan

Full stackgreen part to qualified part

<24engineer response

Demo firstbefore you commit

Same-weekservice dispatch

What to confirm before installation

A porcelain firing oven

Zetasinter Porcelain is an electric oven for firing printed porcelain pieces. At 54 litres it takes a full batch in one run, which makes small-series work practical rather than one piece at a time. It reaches 1320 °C on a 230 V, 4.5 kW supply and weighs 95 kg, so it fits a normal workshop, with a fully configurable temperature programmer and several heating modes.

We confirm your setup first

This oven is built for porcelain firing, not technical ceramics. For alumina, zirconia or silicon carbide you need the Zetasinter Chamber, which reaches 1600 °C. Before you order, we confirm your material, the 230 V feed and the furnace cycle with the manufacturer, so you receive the right unit for the parts you fire.

About this product

Zetasinter Porcelain is an electric oven for firing printed porcelain pieces. At 54 litres it takes a full batch in one run, which is what makes small-series work practical rather than one piece at a time. It reaches 1320 °C on a 230 V, 4.5 kW supply and weighs 95 kg, so it fits a normal workshop, with a fully configurable temperature programmer and several heating modes.

Zetasinter Porcelain firing oven open showing the firebrick chamber — The Zetasinter Porcelain oven, open — a 54-litre firebrick chamber on a rolling stand.

Why potters and labs choose it

A porcelain firing oven sized for real batches, not single pieces.

A full batch in one run

54-litre capacity fires multiple pieces in a single run instead of one at a time — what makes small-series porcelain work practical.

Configurable firing

A fully configurable automatic temperature programmer with several heating modes lets you set the firing curve to the piece.

Fits a normal workshop

Runs on 230 V at 4.5 kW and weighs 95 kg — no special power supply and no gas line, since it fires in ambient air.

Supported from California

Genuine Zetamix by Nanoe, supplied and invoiced from California in USD, with the operating manual and firing guide included.

Porcelain oven specifications

Process: firing of printed porcelain pieces in ambient air
Maximum temperature: 1320 °C
Capacity: 54 litres
Oven dimensions: 36 × 36 cm
Power: 4.5 kW · Voltage: 230 V
Weight: 95 kg
Control: fully configurable automatic temperature programmer with several heating modes

Full specifications are listed in the Specifications tab. The oven fires in ambient air, so there is no gas line to plumb — only the electrical feed and sensible extraction to plan.

What you get and how you buy

Genuine Zetamix by Nanoe, supplied and invoiced from California in USD
Operating manual and firing cycle guide included from the manufacturer
Manufacturer on-site training available as a separate option
Delivered price and lead time confirmed at quotation — freight on the oven depends on crate size and destination rather than a fixed figure

Before you order

This oven is built for porcelain firing, not technical ceramics. For alumina, zirconia or silicon carbide, which sinter above this range, use the Zetasinter Chamber and its 1600 °C ceiling instead. Confirm your material with us before ordering so the oven matches the parts you plan to fire.

Tell us the porcelain pieces you fire and your workshop supply, and an applications engineer will confirm the material fit, the 230 V feed and the firing cycle before you order. Sub-4h reply, NDA standard.

Equipment type	Porcelain firing oven
Brand	Zetamix by Nanoe

Common questions

Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.

What materials does the Zetasinter Porcelain oven fire?

The Zetasinter Porcelain oven fires printed porcelain pieces. It is built specifically for porcelain firing, not for technical ceramics. If you need to sinter alumina, zirconia or silicon carbide, the right unit is the Zetasinter Chamber, which reaches 1600 °C, rather than this oven. The Porcelain oven fires in ambient air, so there is no gas supply or atmosphere control to manage. It sits in the Zetamix print-debind-sinter chain for porcelain work, letting you keep printed pieces on your own bench from part to fired result. Confirm your material with us before ordering so the oven matches the parts you plan to fire.

What temperature and capacity does the Zetasinter Porcelain oven reach?

The Zetasinter Porcelain oven reaches a maximum of 1320 °C, which suits porcelain firing rather than the higher cycles that technical ceramics need. Its capacity is 54 litres, with oven dimensions of 36 × 36 cm, so it fires multiple pieces in a single run instead of one at a time. That batch volume is what makes small-series porcelain work practical. A fully configurable automatic temperature programmer with several heating modes lets you set the firing curve to the piece. For alumina, zirconia or silicon carbide, which sinter above this range, use the Zetasinter Chamber and its 1600 °C ceiling instead.

What power and utilities does the Zetasinter Porcelain oven need?

The Zetasinter Porcelain oven runs on 230 V at 4.5 kW, so it needs no special power supply and fits a normal workshop feed. It weighs 95 kg, which is light enough to place on a standard bench or stand without heavy handling equipment. Because it fires porcelain in ambient air, there is no gas line to plumb, only the electrical feed and sensible extraction to plan. The fully configurable temperature programmer runs from that same supply. We confirm the 230 V feed and the furnace cycle with you and with the manufacturer before the order is placed, so the oven is ready to run once it reaches your bench.

What are the install requirements and lead time for the Zetasinter Porcelain oven?

Installing the Zetasinter Porcelain oven is straightforward: it runs on a 230 V, 4.5 kW supply and weighs 95 kg, so it needs no plant-level power and no gas line, since it fires in ambient air. Plan a stable bench or stand and sensible extraction. The oven ships from California as genuine Zetamix by Nanoe, supplied and invoiced in USD, with an operating manual and furnace cycle guide included. Manufacturer training at your site is available as a separate option. Delivered price and lead time are confirmed at quotation, since freight on the oven depends on crate size and destination rather than a fixed figure.

Place your order, or talk to an engineer first

Order Zetasinter Porcelain — 54 L Firing Oven direct, or talk to materials engineer

Add to cart