Out of stock
Nexa3D Light-Engine Glass Replacement Kit for NXE LE1–LE4 – P/N 12018
Replacement light-engine protective glass for Nexa3D NXE printers with LE1 to LE4 light engines. The glass shields the projector optics from resin and debris; a scratched or fouled pane scatters light and softens prints, so swapping it restores clean projection.
- ✓ Protective glass for the NXE light engine (generations LE1–LE4)
- ✓ Match your light-engine generation before ordering (LE5 uses a different kit)
- ✓ Genuine Nexa3D kit (P/N 12018) · ships in 2 business days
$74
The light engine is the most valuable optical assembly in an NXE printer, and a thin pane of glass is what protects it from resin splatter and handling marks. This kit replaces that pane on machines with LE1 to LE4 light engines. When the glass is scratched or clouded it scatters light and softens prints — swapping it restores clean projection.
Compatibility & Specifications
- Type: light-engine protective glass kit
- Function: shields the projector optics from resin, dust and scratches
- Compatible light engines: Nexa3D NXE LE1–LE4 (LE5 / NX Pro uses a different kit)
- Part number: 12018 (genuine Nexa3D kit)
- Replace when: scratched, clouded or fouled, or when cure quality drops
Why Source Through Additive Plus
Nexa3D has ceased operations, so the original kit is out of the supply channel. We source an equivalent protective pane to order — send us your printer serial and the dimensions of the glass currently installed, and we will confirm price and lead time. Not sure which light-engine generation you have? Send us your serial or configuration and we will confirm the right kit. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NXD, NXE |
Other products teams run alongside Nexa3D Light-Engine Glass Replacement Kit for NXE LE1–LE4 – P/N 12018
Single heating resistance for the Zetasinter chamber furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Two-fluid DIW / robocasting head for the 3DCeram M.A.T. — mix two materials, print ceramic slurry or silicone.
- ✓ Mixing 1:1–5:1 · 2×55 mL · up to 6 bar
- ✓ Two-fluid or single-fluid · fine, complex geometries
- ✓ Customer-developed feedstock · installs on your M.A.T.
Add-on for the 3DCeram M.A.T. · requires the base system · made to order
In stock
Genuine removable build chamber for the Formlabs Fuse 1 SLS 3D printer — the modular powder chamber that holds the 165 × 165 × 300 mm build and transfers to the Fuse Sift for cooling and part recovery.
- ✓ Full 6.5 × 6.5 × 11.8 in / 165 × 165 × 300 mm build volume
- ✓ Swap chambers to keep printing while another cools and is unpacked
- ✓ Genuine Formlabs part BC-FS1-120V-01 — supported by Additive Plus
Made to order
· Currently on backorder — contact us for the latest lead time
Replacement outer vat container for the Nexa3D XiP Pro — the rigid tray that holds the resin vat and membrane assembly in place. A cracked or resin-fouled container compromises the seal and the vat above it; this genuine replacement drops straight back in.
- ✓ Rigid outer container for the XiP Pro resin vat assembly
- ✓ Direct fit for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
The Polymaker PolyBox Edition II is a sealed filament dry box that holds two 1 kg spools or one 3 kg spool and keeps 3D printing filament below 15% relative humidity — during storage and while you print.
- ✓ Holds 2×1 kg or 1×3 kg spools · 1.75 & 2.85 mm filament
- ✓ Built-in hygrometer + reusable silica-gel desiccant · humidity below 15%
- ✓ Feeds filament straight into the printer while sealed
Made to order
· Currently on backorder — contact us for lead time
Replacement masking LCD module for the Nexa3D XiP Pro industrial resin printer — the display that defines every cured layer under the light engine. A worn LCD shows as dim zones, stuck pixels or incomplete cures; this drop-in module restores full-resolution output.
- ✓ Masking LCD module for the XiP Pro light engine
- ✓ Direct replacement for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which light engines does this glass kit fit?
What does the light-engine glass do?
When should it be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Light-Engine Glass Replacement Kit for NXE LE1–LE4 – P/N 12018 direct, or talk to materials engineer