Free U.S. shipping on orders over $200 · Mutual NDA standard before any file review.
Talk to an engineer →
In stock
Other Accessories and Spare Parts, Accessories
Nexa3D Replacement Resin Vat Container for XiP Pro – Outer Tray
Replacement outer vat container for the Nexa3D XiP Pro — the rigid tray that holds the resin vat and membrane assembly in place. A cracked or resin-fouled container compromises the seal and the vat above it; this genuine replacement drops straight back in.
- ✓ Rigid outer container for the XiP Pro resin vat assembly
- ✓ Direct fit for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
$220
Price held 7 days after order.
About this product
The XiP Pro’s resin vat sits inside a rigid outer container that holds and seals it in the printer. If that container cracks, warps or fouls with cured resin, the whole vat assembly can sit askew or leak. This genuine replacement drops straight back in for a few minutes of downtime.
Compatibility & Specifications
- Type: rigid outer vat container
- Function: holds and seals the resin vat / membrane assembly in place
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro resin vat container
- Replace when: cracked, warped or heavily fouled with cured resin
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Keeping this inexpensive part on hand avoids taking a production XiP Pro offline. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Replacement Resin Vat Container for XiP Pro – Outer Tray
Spare parts
Nexa3D Tool Kit for XiP Pro – Maintenance Set
Replacement tool kit for the Nexa3D XiP Pro — the hand tools Nexa3D supplies for operating and maintaining the industrial printer, from part removal to routine upkeep. Handy for replacing lost tools or equipping a second workstation.
- ✓ Genuine Nexa3D XiP Pro hand-tool set
- ✓ For part removal and routine XiP Pro maintenance
- ✓ Ships in 2 business days from US stock
From $289
Add to cart
In stock
· 2 Business Days
Accessories
Nexa3D Resin Vat for XiP – Replacement Vat Assembly
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
From $543
Add to cart
In stock
· 2 Business Days
Accessories
Nexa3D Resin Bottle Spout for 1.5 L Container (XiP / XiP Pro) – OEM Spare | P/N 12053-03
OEM pour spout for the 1.5 L (1.5 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-03 (Rev A).
- ✓ Genuine Nexa3D spare · P/N 12053-03-RevA
- ✓ Fits the 1.5 L (1.5 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ Contact us for current availability and lead time
From $6
Get quote
Out of stock
· Currently out of stock — contact us for availability and lead time
Other Accessories and Spare Parts
Nexa3D Replacement Air Filter for XiP AiR – Activated-Carbon Cartridge
Replacement activated-carbon cartridge for the Nexa3D XiP AiR air-filtration accessory. It captures resin odour and VOCs from the XiP's exhaust, so a saturated cartridge should be swapped to keep the AiR unit filtering effectively.
- ✓ Activated-carbon odour / VOC capture cartridge
- ✓ Fits the Nexa3D XiP AiR filtration unit
- ✓ Genuine Nexa3D consumable · ships in 2 business days
From $74
Add to cart
In stock
· 2 Business Days
Accessories
Nexa3D Light-Engine Glass Replacement Kit for NXE LE1–LE4 – P/N 12018
Replacement light-engine protective glass for Nexa3D NXE printers with LE1 to LE4 light engines. The glass shields the projector optics from resin and debris; a scratched or fouled pane scatters light and softens prints, so swapping it restores clean projection.
- ✓ Protective glass for the NXE light engine (generations LE1–LE4)
- ✓ Match your light-engine generation before ordering (LE5 uses a different kit)
- ✓ Genuine Nexa3D kit (P/N 12018) · ships in 2 business days
From $73
Add to cart
In stock
· 2 Business Days
Accessories
Nexa3D Wash Bucket for XiP Wash+Cure – Replacement Container
Replacement wash bucket for the Nexa3D XiP Wash+Cure station — the container that holds the cleaning solvent your printed parts are rinsed in. Swap a cracked or heavily fouled bucket to keep the wash cycle clean and contained.
- ✓ Solvent wash container for the XiP Wash+Cure
- ✓ Direct fit for the Nexa3D XiP Wash+Cure station
- ✓ Genuine Nexa3D part · ships in 2 business days
From $87
Add to cart
In stock
· 2 Business Days
Other Accessories and Spare Parts · DIW
Sygnis Teflon-Lined Dispensing Tips for F-NIS DIW – 0.25 mm, Anti-Clog | Pack of 20
Teflon-lined dispensing tips for the Sygnis F-NIS direct-ink-writing (DIW) system — the internal PTFE lining resists clogging and keeps extrusion consistent, making them a strong choice for multi-phase pastes and materials carrying solid particles.
- ✓ PTFE-lined bore — anti-clog, smooth flow for filled pastes
- ✓ 0.25 mm color-coded tip · luer-lock fit · 25.4 mm length
- ✓ In US stock · sold in packs of 20 · ships in 2 business days
Prints Polypropylene, Teflon, Stainless Steel
From $120
Get quote
In stock
· 2 Business Days
Other Accessories and Spare Parts
3DVerkstan Olsson Ruby 0.8 mm Nozzle for 1.75 mm Filament – Wear-Resistant Abrasive Nozzle
Genuine 3DVerkstan Olsson Ruby 0.8 mm nozzle for 1.75 mm filament — a synthetic-ruby tip in a brass body for abrasive composites.
- ✓ 0.8 mm orifice · 1.75 mm filament · standard M6 (E3D V6 / Olsson) thread
- ✓ Ruby tip resists carbon fiber, glass fiber, steel, and boron carbide fills
- ✓ Made to order — typically ships in 1–2 weeks
From $90
Add to cart
On backorder
· Made to order — typically ships in 1–2 weeksCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
How is the vat container different from the resin vat?
On the XiP Pro, the resin vat carries the membrane the print peels from, while this container is the rigid outer tray that holds and seals that vat in the printer. If the membrane is worn you need the vat; if the outer tray is cracked or fouled you need this container.
Which printer is it for, and is it genuine?
It is a genuine Nexa3D vat container for the XiP Pro industrial printer, sized to seat and seal the vat assembly correctly. It is not the standard XiP part, so order it specifically for a XiP Pro.
When should the container be replaced?
Replace it when cracked, warped or so fouled with cured resin that it no longer holds the vat squarely or seals cleanly. Keeping a spare avoids taking a production XiP Pro offline over an inexpensive part.
Place your order, or talk to an engineer first
Order Nexa3D Replacement Resin Vat Container for XiP Pro – Outer Tray direct, or talk to materials engineer