In stock
Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform
Slotted replacement build plate for the Nexa3D XiP Pro. The slots let resin drain and reduce peel forces during printing, which helps on tall or large parts. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted platform — resin drainage and reduced peel force
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
$1,335
Looking for Nexa3D resins? They are discontinued. See current replacements →
Nexa3D offers the XiP Pro build platform in two styles, and this is the slotted version. The openings let resin drain and ease the peel forces on each layer, which helps when you are running tall or large parts. When a plate warps or stops holding prints, a fresh one restores dependable adhesion.
Compatibility & Specifications
- Type: slotted build platform
- Benefit: resin drainage and reduced peel force on large / tall builds
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro slotted build plate (XiPPro_BP_SLOTTED)
- Replace when: warped, deeply gouged or no longer holding parts after re-leveling
Why Source Through Additive Plus
Genuine Nexa3D parts, stocked in the US and shipped in about two business days. Not sure whether slotted or solid suits your parts? Ask our engineers — they run these machines. Sub-24-hour response. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform
Material changeover kit for the Nexa3D NXD, with the consumable parts needed to switch resins cleanly on the automated resin system. Using a fresh kit at each changeover avoids cross-contaminating one material with another.
- ✓ Consumables for a clean resin changeover on the NXD
- ✓ Genuine Nexa3D kit (P/N 11276)
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Single heating resistance for the Zetasinter chamber furnace.
- ✔ One resistance per unit — order the quantity your furnace needs
- ✔ Genuine Zetamix by Nanoe component
- ✔ Wear part on any resistance-heated furnace
In stock
· Ships from California · 10–20 business days
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Turn the F-NIS 23151 already in your lab into Version E: a second printhead, so two materials print in one job.
- Two pneumatic heads, independent pressure for each cartridge
- Independent heating up to 60 °C for each cartridge
- Shared UV 365/405 nm · 120 °C glass platform kept
- Lead time 2–3 weeks · remote commissioning · 12-month warranty
Made to order
· Ships in 2–3 weeks
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Slotted, chamfered replacement build plate assembly for the Nexa3D NX Pro and NXD (NXE 400 series). The slots ease resin drainage and peel forces; the chamfer aids part release. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted chamfer platform — drainage and easier release
- ✓ Fits Nexa3D NX Pro / NXD (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12389) · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
What is the difference between the slotted and solid build plate?
Which printer is it for, and is it genuine?
When should the build plate be replaced?
Place your order, or talk to an engineer first
Order Nexa3D Slotted Build Plate for XiP Pro – Replacement Print Platform direct, or talk to materials engineer