In stock
Nexa3D LCD Protective Glass Kit for XiP Pro – Screen Shield
Protective glass for the Nexa3D XiP Pro that shields the masking LCD from resin drips and scratches. On an industrial printer where the LCD is a major cost, this low-priced consumable is the cheapest insurance you can keep on the shelf.
- ✓ Shields the XiP Pro masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D kit · ships in 2 business days
$45
Looking for Nexa3D resins? They are discontinued. See current replacements →
On an industrial printer the masking LCD is a major cost, and resin drips or scratches are exactly what kill it. This protective glass takes the abuse instead — a low-priced consumable standing between everyday handling and the XiP Pro’s most expensive optical part.
Compatibility & Specifications
- Type: protective glass covering the masking LCD
- Function: shields the screen from resin, dust and scratches
- Compatible printer: Nexa3D XiP Pro industrial resin printer (not standard XiP)
- Part: genuine Nexa3D XiP Pro LCD protective glass kit (XiPPro_GLASS_KIT)
- Replace when: scratched, clouded, resin-fouled or after any leak onto the screen
Why Source Through Additive Plus
Genuine Nexa3D consumables, stocked in the US and shipped in about two business days. A spare on the shelf means a resin spill costs you a glass, not an LCD. Sub-24-hour response from engineers who run these machines. Ordering for a department or need a PO? Contact us.
| Brand | Nexa3D |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D LCD Protective Glass Kit for XiP Pro – Screen Shield
Keep your NXE 400 / 400Pro at full throughput — two genuine Nexa3D Everlast-2 membranes.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Second-generation Everlast-2 interface — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
A spare on the shelf costs far less than an idle NXE.
In stock
· Ship Date Confirmed at Order
Replacement light-engine filters for Nexa3D NXE and NX Pro printers, supplied as a 4-pack. They keep cooling airflow to the light engine clean, protecting the optics and electronics from dust build-up. Swap them on schedule as part of routine maintenance.
- ✓ Light-engine cooling / air filters, 4-pack
- ✓ Fits Nexa3D NXE and NX Pro light engines
- ✓ Genuine Nexa3D consumable (P/N 11190) · ships in 2 business days
In stock
· 2 Business Days
Best value for the XiP Pro — five genuine Nexa3D Everlast-1 membranes at the lowest cost per membrane.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lowest cost per membrane in the Everlast-1 line — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
One purchase order, months of uninterrupted printing.
In stock
· 5–15 Business Days
Debinding kit for the Zetamix print → debind → sinter workflow.
- ✔ For the debinding stage of the Zetamix ceramic and metal filaments
- ✔ Genuine Zetamix by Nanoe
- ✔ Shipped from California, invoiced in USD
In stock
· Ships from California · 10–20 business days
Teflon-lined 0.25 mm dispensing tips for the Sygnis F-NIS 23151 — the PTFE lining resists clogging with filled and multi-phase pastes.
- Pack of 20 · $120
- 0.25 mm bore, PTFE-lined stainless cannula
- Luer-lock — fits every F-NIS barrel
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Disposable 190-micron mesh filters for straining resin as you pour it into or out of a Nexa3D vat — they catch cured flakes and debris before they reach the print. 50 filters per pack.
- ✓ 190-micron fine filtration — protects the vat membrane and your prints
- ✓ Fits Nexa3D NXE 400 / NXE 400 Pro (NX Pro) and NXD resin workflows
- ✓ 50-pack · genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Replacement outer vat container for the Nexa3D XiP Pro — the rigid tray that holds the resin vat and membrane assembly in place. A cracked or resin-fouled container compromises the seal and the vat above it; this genuine replacement drops straight back in.
- ✓ Rigid outer container for the XiP Pro resin vat assembly
- ✓ Direct fit for the Nexa3D XiP Pro industrial printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer is this protective glass for?
Is this a genuine Nexa3D part?
When should the protective glass be replaced?
Place your order, or talk to an engineer first
Order Nexa3D LCD Protective Glass Kit for XiP Pro – Screen Shield direct, or talk to materials engineer