In stock
Nexa3D 750 W Power Supply for XiP Pro – 24 V DC / 31.3 A | P/N 52422-01
OEM-grade 24 V DC / 750 W power supply for the Nexa3D XiP Pro 3D printer — genuine replacement unit (part 52422-01), in US stock and ships in 2 business days.
- ✓ 24 V DC output, 31.3 A, 750 W — Nexa3D part 52422-01
- ✓ Fits the Nexa3D XiP Pro — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
$529
Order the right part, the first time
Genuine Nexa3D OEM part
This is Nexa3D part 52422-01 — a 24 V DC / 31.3 A / 750 W supply built to the XiP Pro’s original electrical spec, not a generic substitute. Matched by part number, it drops into the XiP Pro without rework.
Ships in 2 business days from US stock
In-stock at our California facility — no overseas lead times on maintenance parts. Backed by engineers who install and service Nexa3D systems. Sub-24h response, NDA standard.
Compatibility & Specifications
This is the genuine Nexa3D 24 V DC, 31.3 A, 750 W power supply — part number 52422-01-RevA — for the Nexa3D XiP Pro resin 3D printer. It delivers regulated 24 V DC at up to 750 W (31.3 A) to the machine’s motion, light-engine, and control electronics. Match part number 52422-01 against your machine’s bill of materials, or the label on the unit you are replacing, before ordering.
Why Source Through Additive Plus
Additive Plus is a US-based Nexa3D partner — we stock and service the printers these parts go into. Order the genuine OEM spare from US inventory, with a sub-24-hour response from engineers who work on these machines, instead of waiting on overseas lead times. Need several units or an official purchase order for a department? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | XIP PRO |
Other products teams run alongside Nexa3D 750 W Power Supply for XiP Pro – 24 V DC / 31.3 A | P/N 52422-01
Genuine Nexa3D touchscreen module (P/N 92007-01 Rev A) for the xWASH automated parts washer — the HMI panel used to set and start wash cycles.
- ✓ OEM Nexa3D P/N 92007-01 Rev A — xWASH parts washer
- ✓ Touchscreen HMI control panel · direct replacement
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
OEM-grade controller PCB for the Nexa3D xCURE post-curing station — genuine Nexa3D part 30106-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D main control board — part 30106-02 (Rev C) for the xCURE post-curing unit
- ✓ Drives the UV LED array, heater, front display, and stored cure profiles
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D snap-in PCB standoff (P/N 52286-01) — the board support that mounts the Raspberry Pi controller inside the XiP resin 3D printer. In stock at our US facility, ships in 2 business days.
- ✓ Snap-in standoff / board support for the Raspberry Pi controller
- ✓ Genuine Nexa3D service part, P/N 52286-01
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Genuine Nexa3D 160 W external power supply for the XiP platform — regulated 24 V DC output through a 4-pin DIN connector.
- ✓ OEM Nexa3D P/N 52040-01 Rev A — XiP platform
- ✓ 160 W · 24 V DC output · 4-pin DIN connector
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
OEM-grade Z-stage arm assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 92131-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D Z-stage arm — part 92131-01
- ✓ Carries the build platform on the Z axis
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
OEM-grade touchscreen display assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 12251-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D touchscreen — part 12251-02 (Rev A)
- ✓ Front display for starting prints and running maintenance
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Replacement PN532 NFC controller PCB and antenna for the Nexa3D XiP — the board that reads the NFC tag on each resin bottle so the printer identifies the material. If the XiP stops recognising resin cartridges, a faulty NFC board is a common cause.
- ✓ PN532 NFC controller PCB with antenna
- ✓ Reads resin-bottle tags on the Nexa3D XiP
- ✓ Genuine Nexa3D board (P/N 32002) · ships in 2 business days
In stock
· 2 Business Days
OEM-grade LCD interface DisplayPort board for Nexa3D NX 3D printers — genuine light-engine interface board (part 32032-01), in US stock and ships in 2 business days.
- ✓ Routes the DisplayPort signal to the LE5 light-engine LCD — Nexa3D part 32032-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which Nexa3D printer is this 24 V 750 W power supply for?
Is this a genuine Nexa3D part or a third-party replacement?
How fast does it ship?
Place your order, or talk to an engineer first
Order Nexa3D 750 W Power Supply for XiP Pro – 24 V DC / 31.3 A | P/N 52422-01 direct, or talk to materials engineer