In stock
Nexa3D XiP Touchscreen Assembly – Desktop Resin 3D Printer Display | P/N 12251-02
OEM-grade touchscreen display assembly for the Nexa3D XiP desktop resin 3D printer — genuine Nexa3D part 12251-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D touchscreen — part 12251-02 (Rev A)
- ✓ Front display for starting prints and running maintenance
- ✓ In US stock — ships in 2 business days
$650
Genuine parts, from a team that runs these machines
Exact OEM display
Part 12251-02 is the genuine Nexa3D touchscreen for the XiP — the exact display assembly for the desktop printer, not a generic panel. The XiP and XiP Pro use different displays, so matching by part number gets you the right one.
US inventory, ships in 2 days
In stock at our US facility — no overseas lead time on maintenance parts. Order before the daily cutoff and it ships in 2 business days. Not sure of the right part or revision? Our engineers work on these machines and reply in under 24 hours.
Compatibility & Specifications
This is the genuine Nexa3D touchscreen assembly — part number 12251-02 (Rev A) — the front touchscreen display for the Nexa3D XiP desktop resin 3D printer. It is the interface you use to start prints, choose resin profiles, and run maintenance routines; replace it when the display is cracked, unresponsive, or no longer registers touch. Match part number 12251-02 against your printer before ordering — the XiP and XiP Pro use different display assemblies.
Why Source Through Additive Plus
Additive Plus is a US-based Nexa3D partner — we stock and service the machines these parts go into. Order the genuine OEM spare from US inventory, with a sub-24-hour response from engineers who work on these machines, instead of waiting on overseas lead times. Need several units or an official purchase order for a department? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | XiP |
Other products teams run alongside Nexa3D XiP Touchscreen Assembly – Desktop Resin 3D Printer Display | P/N 12251-02
Stock up and keep your XiP printing — three genuine Nexa3D Everlast-2 membranes ready on the shelf.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ In stock in Los Angeles
Three on hand means a fresh membrane is always one swap away.
In stock
· Ship Date Confirmed at Order
Genuine Nexa3D touchscreen module (P/N 92007-01 Rev A) for the xWASH automated parts washer — the HMI panel used to set and start wash cycles.
- ✓ OEM Nexa3D P/N 92007-01 Rev A — xWASH parts washer
- ✓ Touchscreen HMI control panel · direct replacement
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Genuine Nexa3D system SD card (P/N 52024-01) — the storage card that holds the operating image for the Raspberry Pi controller in the XiP resin 3D printer. In stock at our US facility, ships in 2 business days.
- ✓ System SD card for the XiP's Raspberry Pi controller
- ✓ Genuine Nexa3D service part, P/N 52024-01
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Replacement resin vat for the Nexa3D XiP — the tray that holds resin over the masking LCD and carries the membrane the print peels from each layer. As the membrane clouds or wears, print quality drops; a fresh vat restores clean, consistent layers.
- ✓ Resin vat assembly for the XiP LSPc engine
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
September special: $448 (regular $527.40) — valid through September 30, 2026. Wash and cure station for post-processing parts printed on the Nexa3D XiP. Ordered on demand — availability and lead time are confirmed at order. This SKU is being discontinued by the supplier, so the offer runs while supplier stock lasts.
Made to order
Genuine Nexa3D 160 W external power supply for the XiP platform — regulated 24 V DC output through a 4-pin DIN connector.
- ✓ OEM Nexa3D P/N 52040-01 Rev A — XiP platform
- ✓ 160 W · 24 V DC output · 4-pin DIN connector
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Replacement main controller PCB for the Nexa3D XiP — the board that runs the printer's core electronics. If a technician has traced a fault to the controller, this genuine board restores the machine. Installation should be done by a qualified technician.
- ✓ Main controller PCB for the Nexa3D XiP
- ✓ Genuine Nexa3D board (P/N 32001) — professional installation advised
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Genuine Nexa3D Vat Tag for the XiP platform — the OEM identification tag fitted to the resin vat.
- ✓ OEM Nexa3D P/N 52270-01 Rev A — XiP platform
- ✓ Direct replacement for a lost or damaged vat tag
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which printer is this touchscreen assembly compatible with?
Is this a genuine Nexa3D part or a third-party replacement?
How do I know the XiP touchscreen needs replacing?
Place your order, or talk to an engineer first
Order Nexa3D XiP Touchscreen Assembly – Desktop Resin 3D Printer Display | P/N 12251-02 direct, or talk to materials engineer