In stock
Nexa3D LCD Interface DisplayPort Board for LE5 Light Engine – P/N 32032-01
OEM-grade LCD interface DisplayPort board for Nexa3D NX 3D printers — genuine light-engine interface board (part 32032-01), in US stock and ships in 2 business days.
- ✓ Routes the DisplayPort signal to the LE5 light-engine LCD — Nexa3D part 32032-01
- ✓ Fits Nexa3D NX systems — match by part number to your BOM
- ✓ In US stock — ships in 2 business days
$108
Order the right part, the first time
Genuine Nexa3D OEM part
This is Nexa3D part 32032-01 — the LCD interface DisplayPort board built to the printer's original spec, not a generic substitute. Matched by part number, it drops into NX systems without rework.
Ships in 2 business days from US stock
In-stock at our California facility — no overseas lead times on maintenance parts. Backed by engineers who install and service Nexa3D systems. Sub-24h response, NDA standard.
Compatibility & Specifications
This is the genuine Nexa3D LCD interface DisplayPort board — part number 32032-01-RevB — for the LE5 light engine in Nexa3D NX Pro / NXE resin 3D printers. It is the interface board that carries the DisplayPort video signal into the light engine’s LCD masking panel. Match part number 32032-01 against your machine’s bill of materials, or the label on the LCD interface DisplayPort board you are replacing, before ordering.
Why Source Through Additive Plus
Additive Plus is a US-based Nexa3D partner — we stock and service the printers these parts go into. Order the genuine OEM spare from US inventory, with a sub-24-hour response from engineers who work on these machines, instead of waiting on overseas lead times. Need several units or an official purchase order for a department? Contact us.
| Brand | Nexa3D |
| Country of origin | USA |
| Platform | NX |
Other products teams run alongside Nexa3D LCD Interface DisplayPort Board for LE5 Light Engine – P/N 32032-01
Replacement controller PCB assembly for the Nexa3D XiP XL — the board that runs the larger XiP's core electronics. If a technician has traced a fault to the controller, this genuine assembly restores the machine. Installation should be done by a qualified technician.
- ✓ Main controller PCB assembly for the Nexa3D XiP XL
- ✓ Genuine Nexa3D board (P/N 32027) — professional installation advised
- ✓ Ships in 2 business days from US stock
In stock
· 2 Business Days
Genuine Nexa3D system SD card (P/N 52024-01) — the storage card that holds the operating image for the Raspberry Pi controller in the XiP resin 3D printer. In stock at our US facility, ships in 2 business days.
- ✓ System SD card for the XiP's Raspberry Pi controller
- ✓ Genuine Nexa3D service part, P/N 52024-01
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Genuine Nexa3D Vat Tag for the XiP platform — the OEM identification tag fitted to the resin vat.
- ✓ OEM Nexa3D P/N 52270-01 Rev A — XiP platform
- ✓ Direct replacement for a lost or damaged vat tag
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Genuine Nexa3D service part (P/N 52035-01) — the Raspberry Pi 4 Model B 8 GB single-board computer used as the controller in the XiP resin 3D printer. In stock at our US facility, ships in 2 business days.
- ✓ Raspberry Pi 4 Model B, 8 GB — Nexa3D-specified controller board
- ✓ Genuine Nexa3D service part, P/N 52035-01
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business Days — in stock at our US facility
Genuine Nexa3D 8 ft AC power cord for the NXE 400 / 400Pro — IEC C13 to a CEE 7/7 (Type F / Schuko) plug for European mains.
- ✓ OEM Nexa3D P/N 50144-02 Rev A — NXE 400 / 400Pro
- ✓ 8 ft · IEC C13 to CEE 7/7 (Type F / Schuko)
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business Days
Replacement PN532 NFC controller PCB and antenna for the Nexa3D XiP — the board that reads the NFC tag on each resin bottle so the printer identifies the material. If the XiP stops recognising resin cartridges, a faulty NFC board is a common cause.
- ✓ PN532 NFC controller PCB with antenna
- ✓ Reads resin-bottle tags on the Nexa3D XiP
- ✓ Genuine Nexa3D board (P/N 32002) · ships in 2 business days
In stock
· 2 Business Days
OEM-grade controller PCB for the Nexa3D xCURE post-curing station — genuine Nexa3D part 30106-02, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D main control board — part 30106-02 (Rev C) for the xCURE post-curing unit
- ✓ Drives the UV LED array, heater, front display, and stored cure profiles
- ✓ In US stock — ships in 2 business days
In stock
· 2 Business Days
Genuine Nexa3D 3-way adjustable concealed hinge for the XiP platform — black finish, for the printer's enclosure door.
- ✓ OEM Nexa3D P/N 52037-01 Rev A — XiP platform
- ✓ 3-way adjustable · concealed body · black finish
- ✓ In stock — ships in 2 business days from US inventory
In stock
· 2 Business DaysCommon questions
Don't see yours? Email [email protected] — NDA standard, typical reply within 4 hours.
Which Nexa3D printers is this LCD interface DisplayPort board compatible with?
What is this part / what does it do?
Is this a genuine Nexa3D part, and how fast does it ship?
Place your order, or talk to an engineer first
Order Nexa3D LCD Interface DisplayPort Board for LE5 Light Engine – P/N 32032-01 direct, or talk to materials engineer