In stock
Nexa3D XiP Alignment Kit – Build-Plate Calibration Accessory | P/N 12347-01
Genuine Nexa3D XiP Alignment Kit for build-plate leveling on the Nexa3D XiP desktop resin 3D printer — part 12347-01, in US stock and ships in 2 business days.
- ✓ Genuine Nexa3D alignment kit — part 12347-01 (Rev A)
- ✓ Levels and aligns the XiP build platform for flat first layers
- ✓ In US stock — ships in 2 business days
$20
Looking for Nexa3D resins? They are discontinued. See current replacements →
Genuine parts, from a team that runs these machines
Flat first layers start here
The XiP Alignment Kit (part 12347-01) levels and aligns the build platform so the first layer lands flat and adheres across the whole plate — the foundation of a clean print on the XiP.
US inventory, ships in 2 days
In stock at our US facility — no overseas lead time on maintenance parts. Order before the daily cutoff and it ships in 2 business days. Not sure of the right part or revision? Our engineers work on these machines and reply in under 24 hours.
Compatibility & Specifications
This is the genuine Nexa3D XiP Alignment Kit — part number 12347-01 (Rev A) — used to align and level the build platform on the Nexa3D XiP desktop resin 3D printer. Correct build-plate alignment is what gives you a flat, well-adhered first layer across the whole plate, so the kit is part of routine setup and maintenance — after installing a new build plate, after transport, or whenever first layers go uneven. Match part number 12347-01 against your printer before ordering.
Why Source Through Additive Plus
Additive Plus is a US-based Nexa3D partner — we stock and service the machines these parts go into. Order the genuine OEM accessory from US inventory, with a sub-24-hour response from engineers who work on these machines, instead of waiting on overseas lead times. Need several units or an official purchase order for a department? Contact us.
| Brand | Nexa3D |
| Platform | XiP |
| Country of origin | USA |
Other products teams run alongside Nexa3D XiP Alignment Kit – Build-Plate Calibration Accessory | P/N 12347-01
Protective glass that sits over the masking LCD on the Nexa3D XiP, catching resin drips and scratches before they reach the screen. At a fraction of the cost of the LCD itself, it is the cheapest way to protect one of the printer's most expensive parts.
- ✓ Shields the 9.3″ 4K masking LCD from resin and scratches
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D kit · ships in 2 business days
In stock
· 2 Business Days
Replacement resin vat for the Nexa3D XiP Pro — the assembly that holds resin over the light engine and carries the membrane each layer peels from. As the membrane wears, prints stick and quality drops; a fresh vat restores clean, reliable layers on a production printer.
- ✓ Resin vat assembly for the XiP Pro LSPc engine
- ✓ Direct fit for the Nexa3D XiP Pro (not standard XiP)
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Replacement build plate for the Nexa3D XiP — the platform every print is grown on. A flat, clean plate is the foundation of reliable first-layer adhesion; swap a warped or gouged plate to stop parts detaching mid-print.
- ✓ Machined build platform for consistent first-layer adhesion
- ✓ Direct fit for the Nexa3D XiP desktop printer
- ✓ Genuine Nexa3D part · ships in 2 business days
In stock
· 2 Business Days
Slotted, chamfered replacement build plate assembly for the Nexa3D NX Pro and NXD (NXE 400 series). The slots ease resin drainage and peel forces; the chamfer aids part release. Swap a worn or warped plate to keep first-layer adhesion reliable.
- ✓ Slotted chamfer platform — drainage and easier release
- ✓ Fits Nexa3D NX Pro / NXD (NXE 400 series)
- ✓ Genuine Nexa3D part (P/N 12389) · ships in 2 business days
In stock
· 2 Business Days
Airtight end caps for Sygnis F-NIS syringe barrels — seal filled or pre-filled barrels for storage and transport.
- Pack of 10 · $25
- Sizes 10 ml or 30/55 ml
- Fits every F-NIS 23151 version, A to E
- Ships in 2–3 weeks
Made to order
· Ships in 2–3 weeks
Replacement activated-carbon cartridge for the Nexa3D XiP AiR air-filtration accessory. It captures resin odour and VOCs from the XiP's exhaust, so a saturated cartridge should be swapped to keep the AiR unit filtering effectively.
- ✓ Activated-carbon odour / VOC capture cartridge
- ✓ Fits the Nexa3D XiP AiR filtration unit
- ✓ Genuine Nexa3D consumable · ships in 2 business days
In stock
· 2 Business Days
Two genuine Nexa3D Everlast-1 membranes for the XiP Pro — a backup always ready.
- ✔ Each rated 50,000+ layers (~20 L) — up to 25× the life of standard films
- ✔ Lower cost per membrane than singles — genuine Nexa3D OEM
- ✔ Ships fast from our Los Angeles warehouse — lead time 5–15 business days
Never lose a production day to a worn membrane and an empty shelf.
In stock
· 5–15 Business Days
OEM pour spout for the 1 L (1 kg) Nexa3D resin container used with the XiP and XiP Pro desktop resin 3D printers — the genuine screw-on spout for clean, controlled pouring and refilling, supplied to Nexa3D part number 12053-02 (Rev B).
- ✓ Genuine Nexa3D spare · P/N 12053-02-RevB
- ✓ Fits the 1 L (1 kg) Nexa3D resin container · XiP / XiP Pro
- ✓ In US stock · ships in 2 business days
In stock
· 2 Business DaysWhat our customers say
“Harry and team were professional, effective communicators as we set up the order, then they executed quickly and produced an amazing product for us at a very competitive price. Am looking forward to our next print w Additive Plus!”
“Great 3D printing service and the resin parts look super smooth and clean. Really happy with how everything turned out!”
“Harry was very professional and helped me out with my 3D printing needs and explained what options I have in terms of filaments such as PEEK. Highly recommended.”
“I needed a 3D enclosure printed urgently in a specific time period, they did great!”
Common questions
Don't see yours? Email [email protected] — NDA on request, typical reply within 4 hours.
Which printer is the XiP Alignment Kit compatible with?
Is this a genuine Nexa3D part or a third-party replacement?
When do I use the XiP Alignment Kit?
Place your order, or talk to an engineer first
Order Nexa3D XiP Alignment Kit – Build-Plate Calibration Accessory | P/N 12347-01 direct, or talk to materials engineer